• Journal of the korean society of oceanography
• /
• 제33권1-2호
• /
• pp.1-7
• /
• 1998

In the western Weddell Sea, winter mixed layer is characterized by near-freezing temperature and higher salinity due to brine injection through sea-ice formation. This layer becomes Winter Water being capped by warmer and less saline Antarctic Surface Water during the sea-ice melt-ing season. In this study, Winter Water was preliminarily identified by the oxygen isotopic com-positions. The ${\delta}^{18}$O values of Winter Water show the progressively increasing trend from south to north in the study area. It presumably reflects the enhanced mixing with Antarctic Surface Water due to the extent of influence by low S'"0 value of sea-ice/glacier meltwater. Correlations between salinity and 6'"0 values of seawater can be used to more generally characterize Winter Water with a view to identification. However, the prediction on the degree of mixing from these relationships needs more detailed isotope data, although this study allows the oxygen isotopic composition of seawater as a tracer to identify the water mass.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 The 6th International Symposium of East Asian Resources Recycling Technology
• /
• pp.370-374
• /
• 2001

The degree of iron recovery from dust agglomerates was investigated experimentally to determine the optimum mixing ratio of coke in cold bonded pellet(CBP) which is fed into electric arc furnace(EAE) in the minimill plant. From the XRD analysis for EAF dust, magnetite(Fe$_3$O$_4$) and franklinite(ZnFe$_2$O$_4$) was identified as major components. Maximum iron recovery was obtained for the solid carbon content of approximately 18 weight percent. From plant trials of CBP composed of this optimal mixing condition, it was observed that electric power consumption and sulfur content increased with increasing the quantity of CBP.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2001년도 제33회 춘계학술대회 개최
• /
• pp.201-211
• /
• 2001

The influence of aerated oil on high-speed journal bearing is examined by classical thermohydrodynamic lubrication theory coupled with analytical models for viscosity and density of aerated oil in fluid-film bearing. Convection to the walls, mixing with supply oil and re-circulating oil, and some degree of journal misalignment are considered. The considered Parameters for the study of bubbly lubrication are oil aeration level, air bubble size, shaft misalignment and shaft speed. The results show that deliberate oil aeration can more clearly bring on the increasing load capacity under high-speed operation of plain journal hearing than previous normal speed operation. And the load capacity may be increased more by oil aeration under the conditions of shaft misalignment and the increasing speed.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1995년도 Proceedings of the Korea Automation Control Conference, 10th (KACC); Seoul, Korea; 23-25 Oct. 1995
• /
• pp.170-173
• /
• 1995

Recently, we proposed a compact digital vibrometer using a self-mixing laser Doppler velocimeter (SM-LDV). In this paper, we theoretically obtained formulas giving lower and upper limit of measurable velocity. In the prototype digital vibrometer, the theoretical value was 6.7mm/s and 162.8mm/s, respectively, which agreed well with the measured value. The upper limit of measurable displacement amplitude was 12OO.mu.m at 10Hz, and 250.mu.m at 100Hz. Furthermore, the measurement accuracy the displacement amplitude was within -3% and average error -1.3%, when the shape of the sawtooth contained in the Doppler beat signal is clear and sharp. The measurement accuracy is found to depend on a degree of sawtooth asymmetry (DSA).

• Tribology and Lubricants
• /
• 제17권4호
• /
• pp.321-334
• /
• 2001

The influence of aerated oil on high-speed journal bearing Is examined by thermohydrodynamic lubrication theory to lubrication with mixtures of a Newtonian liquid and an ideal gas. For this purpose, analytical models for viscosity and density of aerated oil in fluid-film bearing are applied. Convection to the walls, mixing with supply oil and re-circulating oil, and some degree of journal misalignment are considered. The results show that deliberate oil aeration can increase the load capacity of high-speed plain Journal bearing. And the load capacity is increased more by oil aeration under the conditions of shaft misalignment and higher speed.

• 한국대기환경학회지
• /
• 제14권4호
• /
• pp.321-332
• /
• 1998

Various meleorologlcal dada obtained by SODAR system in shoreline area surrounding Boryung power plant have been analysed to investigate atmospheric diffusibility. Important conclusion may be summarized as follows; (i) Stability classification scheme based on co (standard deviation of wind direction in degree for averaging time of 1 hour) appears to evaluate certain atmospheric velocity and : indicate horizontal mean wind speed. Thus different scheme for stability classification seems to be preferable in order to appropriately estimate lateral and vertical dispersion coefficients cy and cz, respectively. (ii) As a result of comparisons between 3 available schemes for estimating of mixing height, best one turned out to be the double height scheme where height corresponds to maximum cw.

• 대한치과보철학회지
• /
• 제46권6호
• /
• pp.639-643
• /
• 2008

STATEMENT OF PROBLEM: The degree of conversion may influence the ultimate mechanical and physical properties of provisional crown and fixed partial denture materials. The high levels of the unreacted residual monomer may cause deleterious effect on the properties. PURPOSE: The purpose of this study was to measure the degree of conversion of bis-acrylic based provisional crown and fixed partial denture materials by using an infrared spectroscopic method. MATERIAL AND METHODS: Chemically activated three bis-acrylic based provisional crown and fixed partial denture materials, LuxaTemp [DMG, Hamburg, Germany], fast set TemPhase [Kerr, Orange, CA, USA] and Protemp 3 Garant [3M-ESPE, St Paul, MN, USA], were investigated by Fourier transform infrared spectrometry (FTIR). The FTIR spectra of the materials tested were immediately obtained after mixing. The specimens were stored under dry conditions and at $23^{\circ}C$ for 24 hours, and then the spectra of the materials were also obtained. The degree of conversion (%) was calculated from the spectrum of the absorbance between the aliphatic double bond at 1637 $cm^{-1}$ and the aromatic double bond at 1608 $cm^{-1}$ using the baseline method. The data were statistically analyzed using one-way ANOVA and the multiple comparison Scheffe test at the significance level of 0.05. RESULTS: The mean value and standard deviation of the degree of conversion were 52.5 % ${\pm}$ 1.1 %, 50.3 % ${\pm}$ 0.8 %, and 42.3 % ${\pm}$ 4.9 % for LuxaTemp, Protemp 3 Garant and fast set TemPhase, respectively. There was no significant difference between LuxaTemp and Protemp 3 Garant, whereas there was a statistically difference between Protemp 3 Garant and fast set TemPhase, and LuxaTemp and fast set TemPhase (P < .05). CONCLUSION: The degree of conversion of fast set TemPhase was significantly lower than those of the others. The degree of conversion may be correlated with the rate of polymerization.

• Elastomers and Composites
• /
• 제48권1호
• /
• pp.39-45
• /
• 2013

Haake Rheocorder로 각종 과산화물 개시제를 사용하여 ethylene-propylene-diene terpolymer (EPDM)에 단량체 citraconic acid (CCA)을 용융 그라프트 중합을 하여 그라프트 중합물 CCA-g-EPDM을 얻었으며, 이때 효율적인 그라프트 정도와 우수한 성능을 지닌 그라프트 중합물을 얻기 위해서 최적의 반응조건과 최적의 단량체/개시제 농도를 찾는 것은 매우 중요하다. 따라서 본 연구에서는 반응조건과 단량체 및 개시제 함량이 CCA-g-EPDM의 그라프트 정도, 그라프트 효율, 가교정도 (겔화도), 용융흐름지수(MI) 및 기계적 물성 등에 미치는 영향에 초점을 맞추었다. 그라프트 정도와 가교도가 증가함에 따라서 인장강도는 상당히 증가한 반면, 파괴신도 및 MI는 감소하였다. 개시제 중에서 2,5-dimethyl-2,5-di(tert-butyl peroxy)-hexane (T-101)가 가장 우수한 그라프트 정도 (2.31%)를 나타내었으며, CCA와 T-101의 함량이 증가함에 따라 그라프트 정도가 크게 증가하였다. 그리고 그라프트 정도는 반응(혼합)온도 및 반응시간이 증가함에 따라 역시 증가하다가 어느 온도/시간 이상에서는 안정화 혹은 약간 감소하는 경향을 나타내었다. 이러한 영향으로 결과로부터 최적의 단량체/개시제 농도는 5/0.05 wt%이었으며, 최적의 반응온도/시간은 $180^{\circ}C$/15분인 것을 알 수 있었다.

• KSBB Journal
• /
• 제4권3호
• /
• pp.221-228
• /
• 1989

각종 섬유질 효소당화반응조내의 현탁액 혼합교반 양상이 효소당화에 미치는 영향을 검토하기 위하여 3종의 대표적인 bioreactor;vertical impeller type bioreactor-(VITB), horizonatl paddle type bioreactor(TDTB)를 제작하여 그 효용성을 비교 검토하였다. 최적 교반강도는 impel-ler나 paddle로 현탁핵을 교반하는 VITB와 HPTB가 각각 100rpm, 그리고 통자체를 회전시켜 교반하는 TDTB가 200rpm이었으며 TDTB에 부착된 baffle의 형태 및 크기는 큰 영향을 주지 않았다. 또한 VITB나 TDTB의 경우 과다한 교반은 효소의 실활을 유발시켜 오히려 섬유소당화를 저해하였다. 3종의 bioreactor의 최적 교반조건에서의 당화효율을 비교한 결과 VITB가 가장 높았으며 특히 고농도 섬유소 당화시 가장 높은 당화효율을 보여, 가장 효율적인 교반양상을 나타내는 것으로 보인다. 이로 미루어 impeller나 paddle의 물리적 충격에 의한 현탁액의 cellulose network를 파괴시키는 효소반응기가 단순히 교반혼합하는 반응기에 비하여 우수한 결과를 줌을 알 수 있었다. 반면 주어진 양의 당을 생산하는데 소요되는 동력소모를 검토한 결과 TDTB가 VITB에 비하여 다소 낮았으나 고농도의 경우는 급속히 증가되었다. 적절한 bioreactor의 선정에는 기질의 가격, 당화수율, 고농도 당화, 그리고 반응기의 scale-up의 용이성등이 종합적으로 검토되어져야 할 것이다.

• 폴리머
• /
• 제35권2호
• /
• pp.99-105
• /
• 2011

컴파운드의 물성을 최적화하기 위해서는 충전제 입자들의 분배와 분산이 잘 일어나도록 효율적으로 훈련하는 것이 중요하다. 혼련 효용을 향상시키고자 다양한 종류의 혼련 요소들이 이축압출기에 이용되고 있다. 본 연구에서는 탄산칼슘이 충전된 폴리스티렌을 대상으로 충전제 분산에 대한 이축압출기의 스크루 조합 영향을 알아보았다. 충전제의 분산 상태는 포토다이오드가 장착된 광학현미경으로 조사하였다. 실험 결과는 충전제의 분산 정도가 혼련 요소들의 형태 및 위치에 주로 영향을 받는다는 것을 보여주었다.