• Journal of the Korean institute of surface engineering
• /
• v.54 no.6
• /
• pp.371-379
• /
• 2021

The use of anti-corrosive oil (AC) is inevitable for production of industrial steels to prevent corrosion. The AC is degreased before application of steels, which crucially effects on final products, such as automobile, electricity etc. However, qualitative/quantitative evaluation of degreasing performance are steal insufficient. In this study, degreasing performance of anti-corrosive oil on steel have been studied through X-ray photon spectroscopy (XPS) and electrochemical impedance spectroscopy (EIS). Commercial automotive steels (AMS) are coated with 4 different anti-corrosive oils (namely AC1-AC4). In XPS, intensity of C1s peak remained after degreasing indirectly indicates incomplete degreasing. Thus, higher C1s peak intensity means less effective degreasing by degreasing agent. peak intensity of C1s peak shows opposite tendency of peak intensity of O1s. We found that EIS analysis is not applicable to mild steel (such as AMS1) due to corrosion during measurement. However, alloy steel can be fully analyzed by EIS and XPS depth profile.

• Composites Research
• /
• v.13 no.4
• /
• pp.42-53
• /
• 2000

A study has been made to establish an optimum condition in the surface treatment and curing method that is important for the fabrication of Al 7075/CFRP laminates. PAA(Phosphoric Acid Anodizing) provided a good adhesive strength and FPL(Sulfuric / Sodium Dichromate Acid Etching) had a similar adhesive strength with PAA. On the other hand, the poor adhesive strength was shown on vapor degrease and CAA(Chromic Acid Anodizing). By using the atomic force microscope(AFM), it was found that the PAA oxide surface obviously had a greater degree of microroughness as compared to vapor degrease, CAA and FPL treated surfaces. These results support the concept of a mechanical interlocking of the adhesive with-in the oxide pores as the predominant adhesion mechanism. In curing methods, the adhesive strength of co-curing method was higher than that of secondary curing method. With respect to stability of specimen shape, the secondary curing method was better than co-curing method. DMA(Dynamic Mechanical Analysis) test revealed $T_g$ in curing times over 60 min is nearly same, so it is estimated they will have similar degree of curing and joint durability in using FM300M adhesive film.

• Journal of Korean Neurosurgical Society
• /
• v.39 no.5
• /
• pp.366-369
• /
• 2006

Objective : There are various surgical approaches to far-lateral lesions in the L5-S1 intervertebral space. Of these is the validity of a paramedian tangential approach is being investigated in this study. Methods : A retrospective study was conducted on 25 patients who had been diagnosed as having a far-lateral L5-S1 disc herniations, osteophyte, costal process hypertrophy, and had undergone a paramedian tangential approach from November 1999 through December 2003. The degree of symptoms and improvement were compared via the visual analog pain scale, before and after surgery. Results : This study included 4 males and 21 females with a mean age of $62{\pm}11.8$ years old. The average follow-up period after surgery was $8.2{\pm}2.7$ months. The visual analog pain scale taken before surgery was $6.7{\pm}1.1$ points, while the post-surgical scale was $2.4{\pm}0.9$ points showing a significant degrease [p < 005]. There were no complications that developed during surgery. Conclusion : A paramedian tangential approach is less invasive in the soft tissue than that of the median approach. This approach may effectively reduce nerve root compression and expand intervertebral foramens, and is devoid of the risk of spinal instability after surgery. The authors suppose that a paramedian tangential approach is quite an effective technique to relive compression in the far-lateral L5-S1 intervertebral space.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.31 no.2 s.51
• /
• pp.161-167
• /
• 2005

We investigated the effect on inhibition of matrix metalloproteinase (MMP) in human dermal fibroblast (HDF) by production of exopolysaccharide (GF-glucan) from mycelial culture of Grifola frondosa HB0071. The photoprotective potential of GF-glucan was tested in HDF exposed to ultraviolet-A (UVA) light. It was revealed that GF-glucan had an inhibitory effect on MMP-1 expression in UVA-irradiated HDF without any significant cytotoxicity. The treatment of UVA-irradiated HDF with GF-glucan resulted in a dose-dependent degrease in the expression level of MMP-1 protein and mRNA (by maximum $54.4\%$ at an $0.5\%$ GF-glucan). These results suggest that GF-glucan obtained from mycelial culture of G. frondosa HB0071 may contribute to inhibitory action in photoaging by reducing the MMP-1 related matrix degradation system.

• Korean Journal of Soil Science and Fertilizer
• /
• v.9 no.1
• /
• pp.25-31
• /
• 1976

The purpose of this investigation is to find out the effects on the changes of microflora and the effects on the inorganic nutrients of the fertilized soil and the non-fertilized soil under submerged condition with the treatment of butachlor at the levels of 250, 500, and 1000ppm respectively. The survey was made within the period of 72 days with 7-day intervals under the incubated condition. The result came out to be the following: 1. The Fluctuated changes of soil microflora A. Bacteria: The plots treated by 500ppm of butachlor in case of non-fertilized soil showed the decreasing tendency of bacteria until 21st day. But there were no effects on the other plots. The plots treated by 250ppm and 500ppm in case of fertilized soil showed decreasing tendency on the 7th day, and 1000ppm until 21st days. B. Actinomycetes: There was no effects on the actinotnycetes in case of the non-fertilized soil but the fertilized soil showed some decrease. In both cases, actinomycetes have generally shown a little increase according to the time passage. C. Fungi: In both cases of the fertilized soil and the non-fertilized soil, the plots treated by the media showed some decreasing tendency in comparison with the control plots. There was no change to the number of fungi according to the time passage. 2. The fluctuated changes of nutrient A. $NH_4-N$: The whole plots showed decrease of $NH_4-N$ by adding butachlor. The higher the intencity of butachiar showed the more decreasing tendency of $NH_4-N$. In case of the non-fertilized soil, the highest increase of $NH_4-N$ appeared from the 7th day to 14th day, but showed degrease thereafter. The increasing tendency was seen in case of the fertilized soil plots. B. $NO_3-N$: Decrease of $NO_3-N$ was shown in the whole plots by the treatment of media, and on the 44th day of cultivation almost none of $NO_3-N$ was detected. C. $NO_2-N$: Whole plots showed the number of $NO_2-N$ highest on the 35th day, and there were nothing measurable on the 44th day. D. Eh: On the fertilized soil, the condition of reduction went on strongly but on the non-fertilized soil, the condition of reduction kept on till 42nd day and oxidation appeared thereafter.