• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.04a
• /
• pp.47-48
• /
• 2008

본 연구는 제작된 OLED 소자에 UV의 조사시간에 따른 PL intensity 의 감소와 UV power에 따른 PL degradation 변화에 따라 적절한 UV의 조사조건을 찾아 OLEO 소자의 사진이미지를 구현하고자 하였다. 이러한 조건들로부터 얻어진 OLED 소자의 사진이미지 구현을 통하여 그동안 문제점으로만 여겨졌던 UV에 의한 PL degradation 현상이 문제점만이 아닌 다른 하나의 장점으로 발전되어 다른 분야에서 적용될 수 있다고 기대해본다.

• Proceedings of the IEEK Conference
• /
• 1998.06a
• /
• pp.433-436
• /
• 1998

Hot carrier induceed the performance degradation of sense amplifier circuit in DRAM has been measured and analyzed using 0.8.mu.m CMOS process. Simulation and experimental results show that the degradation of the MOS devices affects the decrease of the half-Vcc, voltage gain and the increase of the sensing voltage gain and the increase of the sensing voltage. The dominant degradation mechanism is the capacitance imblance in the bit-line pair. We carried out the spice simulation to investigate the degradation of the sense amplifier circuit.

• Journal of Environmental Science International
• /
• v.7 no.3
• /
• pp.393-400
• /
• 1998

A microorganism, Klebsiella gr. 47, capable of degrading BTX(benzene, toluene and xylene) was isolated from oil-contaminated soil and its characteristics of BTX degradation were investigated. When benzene and toluene were fed to Klebstella gr. 47 simulataneously, they showed competitive ingibition. The degradation rate of xylene was enhanced as much as 3 times when xylene was fed with benzene or toluene. Degradation rate of benzene and toluene was also enhanced by cocultured with Alcaligenes xylosoxidans. When benzene-adapted microorganism was used, each BTX compound was degraded efficiently within 5 hours.

• Nuclear Engineering and Technology
• /
• v.44 no.3
• /
• pp.297-310
• /
• 2012

Aging-related degradation of nuclear power plant components is an important aspect to consider in securing the long term safety of the plant, especially the seismic safety, since the degradation of the components affects not only their seismic capacity but their response. This can cause a change in the seismic margin of a component and the overall seismic safety of a system. To better understand the status and characteristics of degradation of components in Nuclear Power Plants (NPPs), the degradation occurrences of components in the U.S. NPPs were identified by reviewing recent publicly available information sources and the characteristics of these occurrences were evaluated and compared to observations from the past. Ten categories of components that are of high risk significance in Korean NPPs were identified, comprising anchorage, concrete, containment, exchanger, filter, piping systems, reactor pressure vessels, structural steel, tanks, and vessels. Software tools were developed to expedite the review process. Results from this review effort were compared to previous data in the literature to characterize the overall degradation trends.

• Korean Journal of Computational Design and Engineering
• /
• v.18 no.1
• /
• pp.36-48
• /
• 2013

In general, the product is used under several circumstances including environmental and usage conditions. According to the circumstances, the product has various performance degradation processes. In order to optimize the lifecycle of product usage, it is important to observe the degradation process and make suitable decisions on product operations. However, there are not much research works in evaluating the degree of product degradation based on product usage data. Recently, due to emerging ICT (Information and Communication Technology) technologies, it becomes possible to get the product usage data. Based on the gathered data, it is possible to analyze the degree of product degradation. The analysis of product usage data can improve product use and product design with advanced decisions. To this end, this study addresses one approach based on FMEA/FMECA method, called PDMCA (Performance, Degradation Modes and Criticality Analysis) for evaluating product degradation status and making suitable decisions.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.40 no.10
• /
• pp.32-38
• /
• 2003

This works reports the measurement and analysis results on the hot electron induced device degradation in Gate-All-Around SOI MOSFET's, which were fabricated using commercially available SIMOX material. It is observed that the worst-case condition of the device degradation in nMOSFETs is $V_{GS}$ = $V_{TH}$ due to the higher impact ionization rate when the parasitic bipolar transistor action is activated. It is confirmed that the device degradation is caused by the interface state generation from the extracted degradation rate and the dynamic transconductance measurement. The drain current degradation with the stress gate voltages shows that the device degradation of pMOSFETs is dominantly governed by the trapping of hot electrons, which are generated in drain avalanche hot carrier phenomena.r phenomena.

• Journal of Environmental Science International
• /
• v.18 no.7
• /
• pp.797-802
• /
• 2009

To control degradation rate of biodegradable poly(lactide)s (PLA), the stereochemical PLAs with different ratios of d-lactide and l-lactide units were synthesized by the ring open polymerization and the their degradation kinetics were measured by a Langmuir film balance. The alkaline (pH=11) degradation of poly(l-lactide) (l-PLA) monolayer showed the faster rate at a surface pressure of 4 mN/m in the ranges from to 0 to 7 mN/m. However, the enzymatic degradation of l-PLA with Proteinase K did not occur until 4 mN/m. Above a constant surface pressure of 4 mN/m, the degradation rate was increased with a constant surface pressure. These behaviors might be attributed to the difference in the contacted area with degradation medium: alkaline ions need small contact area with l-PLA while enzymes require much bigger one to be activated due to different medium sizes. The stereochmical PLA monolayers showed that the alkaline degradation was increased with their optical impurities while the enzymatic one was inversed. These results could be explained by the decrease of crystallinity with the optical impurity and the inactivity of enzyme to d-LA unit.

• New & Renewable Energy
• /
• v.3 no.1 s.9
• /
• pp.60-67
• /
• 2007

Catalyst coated membrane [CCM] type and catalyst coated substrate [CCS] type of membrane electrode assembly [MEA] were manufactured and evaluated their performance. Degradation test were conducted to find the difference of long term stability in two types of MEA and the factor for performance degradation problem occurred. Performance degradation test of single cell in two different types of MEA were carried out when current density was $200mA/cm^{2}$. The degradation test had proceeded for 230 hours and performance degradation was checked by I-V curve and impedance measurement at regular intervals. Also, MEA before/after operation and changes of catalyst layer were characterized by SEM, TEM, and XRD. Maximum power density of CCM type was higher than that of CCS type. Meanwhile, an increase of particle size of catalyst and an increase of impedance resistance after long term operation were observed. In the case of using CCM type MEA, the performance was deteriorated 38% of initial performance. In the case of using CCS type MEA, the performance was deteriorated 43% of initial performance. In consideration of difference of initial performance, performance of CCM type is higher than that of CCS type but both types had similar problems during degradation test.

• Journal of Microbiology and Biotechnology
• /
• v.15 no.5
• /
• pp.946-951
• /
• 2005

Biodegradation of the endocrine-disrupting chemical di-n-butyl phthalate (DBP) was investigated using a bacterium, Pseudomonas fluorescens B-1, isolated from mangrove sediment. The effects of temperature, pH, salinity, and oxygen availability on DBP degradation were studied. Degradation of DBP was monitored by solid-phase extraction using reversed-phase HPLC and UV detection. The major metabolites of DBP degradation were identified as mono-n-butyl phthalate and phthalic acid by gas chromatography-mass spectrometry (GC-MS) and a pathway of degradation was proposed. Degradation by P. fluorescens B-1 conformed to first-order kinetics. Degradation of DBP was also tested in seawater by inoculating P. fluorescens B-1, and complete degradation of an initial concentration of $100{\mu}g/l$ was achieved in 144 h. These results suggest that DBP is readily degraded by bacteria in natural environments.

• Proceedings of the Korean Society for Applied Microbiology Conference
• /
• 2000.10a
• /
• pp.125-139
• /
• 2000

The differential enhanced degradation of cis- and trans-1,3-D was observed in the previous two studies performed by Ou et al. (1995) and especially Chung et al. (1999). This study was initiated to investigate the involvement of microorganisms in the differential enhanced degradation of the chemicals. As expected, microorganisms were responsible for the enhanced degradation of the chemicals. A mixed bacterial culture capable of degrading 1,3-D was isolated from an enhanced soil sample collected from a site treated with 1,3-D. Similar to the enhanced soil, the mixed culture degraded trans-1,3-D faster than cis-1,3-D. This mixed culture could not utilize cis- and trans-1,3-D as a sole source of carbon for growth. Rather, a variety of second substrates were evaluated to stimulate the differential enhanced degradation of the two isomers. As a result, the mixed culture degraded cis- and trans-1,3-D only in the presence of a suitable second substrate. Second substrates that had the capacity to stimulate the degradation included soil leachate, tryptone, tryptophan, and alanine. Other substrates tested, including soil extract, glucose, yeast extract, and indole (ailed to stimulate the degradation of the two isomers. Therefore, it appeared that the degradation of cis- and trans-1,3-D was a cometabolic process. The mixed culture was composed of four morphologically distinctive bacterial colonies.