• 소성∙가공
• /
• 제9권2호
• /
• pp.193-202
• /
• 2000

The influence of rolling draughts on the formation of through-thickness textures in aluminum 5000X sheet was investigated by X-ray texture measurements and microstructure observations. In order to intensify the deformation inhomogeneities, cold rolling was performed without lubrication. Applying a large draught gave rise to the formation of the shear texture at the surface, whereas a normal plane strain testure formed at the surface after deformation with a small draught. The orientation density along the $\beta$-fiber orientations which developed in the center layer of the rolled specimen was also dependent on the strain gradients in a roll gap. Upon annealing, the deformed substructure of sample surfaces was transformed into a fine grained recrystallized microsturcture through extended recovery reaction. However, coarse grains developed after the discontinuous recrystallization which gave rise to the development of the Cube-texture.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2009년도 제38회 동계학술대회 초록집
• /
• pp.357-357
• /
• 2010

Using ab initio density functional theory, we study the structural and electronic properties of interface between Cu surface and highly electron withdrawing hexaazatriphenylene-hexanitrile (HAT-CN) known as an efficient hole injection layer for organic light emitting diodes (OLEDs). We calculate the equilibrium geometries of the interface with different HAT-CN coverages. Usually, some of C-N bonds located at the edge of the HAT-CN molecule are deformed toward Cu atoms resulting in the reconstruction of Cu surface. By analyzing the electron charge and the potential distributions over the interface, we observe the formation of surface dipoles, which modify the work function at the interface. Such dipole formation is attributed to two origins, one of which is a geometrical nature and the other is a bond dipole. The former is related to structural deformation mentioned above, whereas the latter is due to charge transfer between organic and metal surface.

• 대한금속재료학회지
• /
• 제48권8호
• /
• pp.730-740
• /
• 2010

Aluminum, magnesium, titanium and high Mn steel are difficult to use in electron backscatter diffraction (EBSD) sample preparation due to the formation of an oxidation layer under conventional polishing. Alcohol-based polishing with colloidal silica suspension was introduced for these delicate samples. A hard particle-embedded sample was analyzed successfully using mechanical polishing. Ion-milling was effective in removing oxidized, deformed and transformed layers after mechanical polishing and was able to reduce artifacts significantly. The microstructure of a cross-section of a thin copper film was evaluated by attachment of a dummy to the film for mechanical polishing.

• Bulletin of the Korean Chemical Society
• /
• 제17권5호
• /
• pp.452-457
• /
• 1996

The effects caused by the ionization on the electronic structure and geometry on C60 are studied by the modified Su-Schriffer-Heeger (SSH) model Hamiltonian. After the ionization of C60, the bond structure of the singly charged C60 cation is deformed from Ih symmetry of the neutral C60 to D5d, C1, and C2, which is dependent upon the change of the electron-phonon coupling strength. The electronic structure of the C60+ cation ground state undergoes Jahn-Teller distortion in the weak electron-phonon coupling region, while self-localized states occur in the intermediate electron-phonon region, but delocalized electronic states appear again in the strong electron-phonon region. In the realistic strength of the electron-phonon coupling in C60, the bond structure of C60+ shows the layer structure of the bond distortion and a polaron-like state is formed.

• Current Optics and Photonics
• /
• 제6권2호
• /
• pp.196-201
• /
• 2022

Collagen fibers tens of nanometers in size, which constitute most of the corneal volume of the human eye, are layered in a uniform direction, and adjacent fiber layers are arranged at an angle of 90° to each other. According to the results of this study, the transmittance at 45° of interlayer rotation angle is highest, and higher than that of the 90° body structure. The transmittance is examined, concerning the polarization state of the incident light; circularly polarized light case shows higher transmittance than linearly polarized. Through this, a simulation to confirm the deformed structure of collagen fibers, which show higher transmittance than the anatomical structure of the cornea, is attempted.

• 한국정밀공학회지
• /
• 제13권4호
• /
• pp.61-66
• /
• 1996

The subsequent recrystallizations technique, and experimental strain measurement method by use of recrystallization phenomena, has been successfully applied for the observation of machined surface plastic zones with equivalent plastic strain .epsilon. .geq. 0.5, 0.12 and 0.02 of type 304 stainless steel. The depth of the zone with .epsilon. .geq. 0.5 is very small, 10-15 .mu. m, while those with .epsilon. .geq. 0.12 are 100-200 .mu. m and 200-450 .mu. m, respectively. The depths increase with increasing depth of cut and with decreasing rake angle. The relation between the depth of the zones and the cutting paramenters is shown. The deformation state ahead of the quick-stop cut was also well visualized by the technique.

• 한국정밀공학회지
• /
• 제10권3호
• /
• pp.47-56
• /
• 1993

Typical plastic strains in the machined surface are very difficult to measure, since they are located within a very short distance from the surface and they change very rapidly. There is an alternative way to determine the residual strain in plastically deformed materials by measuring the grain size after a subsequent recrystallization precess. Although, this technique has been successfully applied by several researchers to find the plastic zone around notches and cracks in various materials and welding beads, few works have been reported using the recrystallization method to determine the residual strains in machined surface. Therefore, the purpose of this investigation is to explore the effectiveness of the recrystallization technique in machining applications and in particular, to find the effect of cutting parameters, i.e., depth of cut, rake angle, on the plastic strains. As the result, the recrystallization technique was succesfully applid to determine the plastic strain in machined surface.

• 한국어병학회지
• /
• 제20권2호
• /
• pp.129-137
• /
• 2007

인공 종묘 생산한 황복 (Takifugu obscurus)자어의 사육 중에 발생한 척추 변형의 원인을 조사하기 위하여 변형어를 병리조직학적으로 조사하였다. 척추 변형은 부화 후 80일령의 황복으로 변형의 발생율은 전체 사육 미수의 약 90%였다. 변형어를 soft-X ray로 촬영한 결과 부레의 팽창은 정상적이었으며, 병리조직학적으로는 변형이 발생한 척추 주변의 근섬유 다발이 소형화되면서 모양도 불규칙하게 변하였다. 그러나 새변 연골은 뒤틀림이나 증생 등은 관찰되지 않았다. 척추 변형이 발생한 종묘 생산장에서는 일반적인 사육 방식보다 1-2일 정도 사육수를 빨리 순환시키면서 급이하고 있었는데, 그 후 황복이 무리를 형성하고 나서, 급이하면서 사육수를 환수한 결과 변형의 발생은 없었다. 병어의 조직학적 변화를 사육방식과 더불어 고찰하였을 때, 유영 능력이 불완전한 황복에 급이하면서 사육수를 환수시킴으로써 황복이 먹이를 섭취하기 위하여 수류에 저항하면서 유영한 것이 척추 변형의 원인으로 작용하였을 것으로 생각한다.

• 대한전자공학회논문지
• /
• 제27권10호
• /
• pp.68-77
• /
• 1990

본 논문에서는 CAD 시스템의 신경망을 이용한 자동 입력기 구축을 위한 논리 심볼 인식방법을 제시한다. 손으로 작성한 도면을 인식하기 위해 특징 추출과 log mapping, 그리고 패턴 인식의 다단계 과정을 거친다. 각 논리 심볼의 현태 정보를 추출하기 위해 억제 가중치를 학습할 수 있는 경쟁 학습법을 제안하고 회전과 크기의 변화를 병진된 결과로 나타내는 log mapping을 하고 형태가 변한 심볼을 인식할 수 있도록 겹쳐지는 수용야(Receptive field)를 준비하여 error back propagation을 이용한 다층망으로 심볼을 인식한다.

• 자원환경지질
• /
• 제10권1호
• /
• pp.37-48
• /
• 1977

The earth's crust is unceasingly undergoing deformations because of the forces acting upon it. The relationship between the tectonic forces and the resulting deformations are found from the states of stresses in the earth's crust induced by these forces. The study has been attempted to analyze the deformations of the overlying sedimentary layers, which are deformed by the magma intrusion along its lower boundary. The elastic model is constructed to analyze the geologic structures, by means of the theory of elasticity, and then the appropriate boundary conditions are given. The solution of the Airy stress function which satisfies the given boundary conditions is derived from the analytic method. The internal stress distributions of the deformed elastic model layer are portrayed by principal stress trajetories, and then the corresponding potential faults and joints systems are predicted from the Coulomb-Mohr failure criterion. The internal displacement distributions are shown by the calculated displacement components vectors, namely horizontal, vertical and net components. Results of the numerical calculations show the developments of some geologic structures as follows; (1) one set of shear joints and or two sets of shear joints which are oppisite directions, and one set of extension joints parallel to the ${\sigma}_1$ direction, (2) one set of high angle thrusts and normal faults, (3) symmetric fold; both limbs are dipping in opposite direction with low angle. The field work at the Wall-A San area, located near Jinju City, in southern Korea, had accomplished to compare the field structures with the predicted ones. The results of the comparison exhibits the developments of joint and fault systems satisfactorily consistent with each others. But the area does not show any type of folding, in spite of the intrusion of a granodiorite massif, this fact is one of the important features of the whole Kyungsang sedimentary basins of Mesozoic age distributed at the south-eastern parts of Korea. For this reason, it is thought that the magma intrusion had occurred with extremly low pressure. The geologic structures have been modified by the erosion and weathering throughout the geologic time, and the conditions of the sedimentary layers (width, thickness and radius of magma) are not the same as before, being intruded by the magma. To enlighten this, it is preferable to study these geologic structures with analyses of various types of rheological models.