• 열처리공학회지
• /
• 제32권3호
• /
• pp.113-117
• /
• 2019

The effects of severe plastic deformation and heat treatment on the mechanical properties of Al 5052 and 6005 alloys were investigated using the metallurgical technique and nano-indentation technique in nano-surface region. Equal channel angular pressing (ECAP) was used to apply severe plastic deformation to the aluminum alloys in order to obtain fine grain sized materials. The elastic modulus was measured and interpreted in relation to the metallurgical observation. The elastic modulus increased after ECAP process due to evolution of the fine grains. However, the elastic modulus decreased after heat treatment due to generation of coarsened precipitates on the grain boundaries.

• 한국철도학회논문집
• /
• 제19권2호
• /
• pp.204-212
• /
• 2016

국내 궤도 흙노반재료의 선정기준은 기초물성 값(입경, 200번체 통과량($P_{200}$), 4번체 통과량($P_4$), 균등계수($C_u$), 곡률계수($C_c$)등)을 이용하는 통일분류법에 의존하고 있으며, 선정된 궤도노반의 현장 다짐도는 들밀도 시험 및 반복평판재하시험 결과 $E_{v2}$에 의해 파악한다. 그러나 궤도노반의 변형 및 안정성에 미치는 가장 큰 영향요소는 강성(Stiffness)이므로, 노반재료의 분류특성은 기초물성 값 자체 보다는 다짐 후 변형계수를 활용하는 것이 보다 정확하다고 할 수 있다. 본 연구에서는 궤도노반에 사용되는 국내 대표적인 흙 재료의 기초물성과 현장시험에 의한 변형계수($E_{v2}$, $E_{vd}$)와의 상관식을 도출하였다. 이와 같은 상관특성은 성능설계를 위한 국내 고유의 철도궤도용 전용흙분류기준수립을 위한 근거로 사용될 수 있다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 정기총회 및 추계학술대회 논문집
• /
• pp.428-435
• /
• 2011

In general, thickness of the sublayers under track is designed based on concept of vertical soil reaction value or vertical stiffness. However, this design method cannot take consideration into soil-track interaction under repetitive load, traffic condition and velocity of the train. Furthermore, the reinforced roadbed soils experience complex behavior that cannot be explained by conventional stress-strain relation expressed as soil reaction value k. The reinforced roadbed soils also can produce cumulative permanent deformation under repetitive load caused by train. Therefore new design method for the sublayers under track must be developed that can consider both elastic modulus and permanent deformation. In this study, a new design concept, a rule-of-thumb, is proposed as the form of design monograph that is developed using elastic multi-layer and finite element programs by analyzing stress and deformation in the sublayers with changing the thickness and elastic modulus of the sublayers and also using data obtained from repetitive triaxial test. This new design concept can be applied to design of the reinforced roadbed before developing full version of design methodology that can consider MGT, axial load and the material properties of the layers. The new design monograph allows the user to design the thickness of the reinforced roadbed based on permanent deformation, elastic modulus and MGT.

• 비파괴검사학회지
• /
• 제30권2호
• /
• pp.146-154
• /
• 2010

알루미늄 5052 합금의 탄성특성에 대한 ECAP 강소성변형과 어닐링효과를 연구하였다. 알루미늄 5052 합금은 용체화 처리 후 ECAP 가공하고 어닐링처리를 수행하였다. 탄성계수는 기존의 인장시험과 나노압입시험을 통해 측정하고 음향현미경의 음향재료신호를 이용하여 시료의 표변에서 탄성계수를 측정하였다. 기존의 시험법으로는 불가능한 소성변형과 열처리에 따른 탄성계수의 변화를 음향재료신호를 이용하여 성공적으로 측정하였고 개개의 결정립에서도 결정방위에 의존하는 탄성계수를 얻었다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2000년도 봄 학술발표회 논문집
• /
• pp.247-254
• /
• 2000

In this study, the reinforcing effect of micropile for weathered rock is analysed by laboratory model tests. Especially, the effect of the number, the surface roughness, and length of micropile are focused. The results of tests are as follows: $\circled1$ The deformation modulus of reinforced ground is less than equivalent deformation modulus, and $\circled2$ Increasing effect of unconfined compressive strength is not large as times as increasing the number of micropile.

• 한국지구물리탐사학회:학술대회논문집
• /
• 한국지구물리탐사학회 2003년도 Proceedings of the international symposium on the fusion technology
• /
• pp.129-141
• /
• 2003

The precise prediction of ground displacement plays an important role in planning and constructing tunnels. In this study, an equation for predicting the surface and crown settlement is suggested by examining the theories of ground movement caused by tunnel excavation. From the 3D numerical modeling, the reinforcement effect of UAM (Umbrella Arch Method) is quantitatively analyzed with respect to deformation modulus and overburden. By using a regression technique for the numerical results, an equation for predicting the settlement is suggested.

• Structural Engineering and Mechanics
• /
• 제24권6호
• /
• pp.727-740
• /
• 2006

A simple plane-strain solution is derived in this paper for the functionally graded multilayered isotropic elastic cylinder under static deformation. The solution is obtained using method of separation of variables and is expressed in terms of the summation of the Fourier series in the circumferential direction. While the solution for order n = 0 corresponds to the axisymmetric deformation, that for n = 2 includes the special deformation frequently utilized in the upper and lower bounds analysis. Numerical results for a three-phase cylinder with a middle functionally graded layer are presented for both axisymmetric (n = 0) and general (n = 2) deformations, under either the traction or displacement boundary conditions on the surface of the layered cylinder. The solution to the general deformation case (n = 2) is further utilized for the first time to find the upper and lower bounds of the effective shear modulus of the layered cylinder with a functionally graded middle layer. These results could be useful in the future study of cylindrical composites where FGMs and/or multilayers are involved.

• 한국철도학회논문집
• /
• 제11권1호
• /
• pp.61-68
• /
• 2008

교통하중이 작용하는 노반의 응력-변형율 간의 상관성의 특징을 나타내기 위하여 회복탄성계수가 사용되어왔다. 최근 도로의 경우 노반의 설계에 있어 AASHTO에서 제안된 역학적-경험적 설계가이드에 따라 회복탄성계소의 사용이 더욱 권장되는 실정이다. 이에 비해 국내 철도의 노반설계에 있어서는 정적실험 결과인 $K_{30}$이나 변형계수를 사용하고 있는 실정이다. 따라서 철도노반의 설계에 있어 회복탄성계수의 적용 가능성에 대한 평가가 이루어져야 할 것이다. 본 연구에서는 14종의 점성토 흙에 대하여 회복 및 영구변형 특성에 대한 평가를 위하여 기본 물성실험, 일축압축실험 그리고 회복탄성계수 실험을 수행하였다. 또한 일축압축 실험결과와 접선탄성계수, 일축압축강도, 파괴시 변형율 첨두 강도에서의 할선탄성계수와 항복변형율을 바탕으로 회복탄성계수 추정을 위한 예측모델이 제안되었다. 본 연구에서 제안된 예측모델은 실측결과와의 비교시 만족할 만한 값을 보이는 것으로 확인되었다. 다만 회복탄성계수 실험시 발생하는 영구변형에 대해서는 현재 고려하고 있지 않다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 1996년도 가을 학술발표회 논문집
• /
• pp.61-70
• /
• 1996

• Journal of Acupuncture Research
• /
• 제15권2호
• /
• pp.81-96
• /
• 1998

This study was done to find out the correlation between manual palpitation and mechanical measurement and the possibility to produce the data using chest and abdominal Front Point(募穴). Followings are the results from the present study. 1. The maximal pressure felt by the patient was 10kgf/$cm^2$. 2. The maximal deformation felt by the patient was in the range of 6cm. 3. The modulus (index obtained by the division of maximal pressure and maximal deformation) was highly correlated with manual palpitation. 4. It was useful to classify two front points in the abdomen and chest when modulus is concerned. 5. When the index of elastic modulus are big and small enough, it is said excessiveness and deficiency(虛實), respectively. Overall, this study was able to find the possibility to quantify the traditional state of excessiveness and deficiency in the form of objected data.