• 한국지반공학회논문집
• /
• 제24권1호
• /
• pp.61-70
• /
• 2008

지표면 침하량, 침하 기울기 그리고 터널주변의 지반 변위에 대한 관리와 예측은 도심지 저토피 터널의 설계와 시공에서 주요한 인자가 된다. 저토피 터널에서의 굴착에 따른 변형 해석은 터널 측벽부에서 지표부까지 발달하는 전단대의 변형특성을 파악하는 것이 중요하다. 본 연구는 2차원 실내 터널 모형실험과 전단 탄성계수 및 강도 정수의 저하를 고려한 변형률 연화모델 해석을 통하여 미고결 저토피 터널에서의 굴착으로 인한 변형 거동 특성을 규명해 보았다. 변형률 연화모델을 이용한 수치해석과 모형 터널 실험과의 비교에서 지표면 침하, 천단침하 그리고 전단대의 발달형태에서 부합되는 결과가 나타났다. 본 연구에서 변형률 연화모델은 저토피 터널의 비선형 변형해석에 대하여 적용성이 있음을 알 수 있었다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2003년도 신호처리소사이어티 추계학술대회 논문집
• /
• pp.161-164
• /
• 2003

This paper proposes a hierarchical approach to active shape model using wavelet transform. The proposed algorithm allows us to use both global shape characteristics and finer details for model deformation. The statistical properties of the wavelet transform of a deformable model are analyzed by principal component analysis and used as priors in the contour's deformation.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2000년도 춘계학술대회논문집
• /
• pp.192-195
• /
• 2000

In describing the plastic deformation behaviour of fine grained materials a phase mixture model in which a polycrystalline material is regarded as a mixture of a crystalline phase and a grain boundary phase has been successful. The deformation mechanism for the grain boundary phase which is necessary for applying the phase mixture model is modelled as a diffusional flow of matter though the grain boundary. The proposed model can explain the strain rate and grain size dependence of the strength of the grain boundary phase.

• 소성∙가공
• /
• 제5권2호
• /
• pp.156-164
• /
• 1996

To investigate the behavior of plastic deformation in axisymmetric extrusion through square dies, experimental works with the plasticine as a model material are carried out at the room temperature. Some mechanical properties of the model material are determined by compression and ring compression tests. Visioplasticity method using expermental grid distortion in extrusion is introduced to analyze the plastic flow strain rate and strain distribution. In spite of severe deformation during the extrusion through square die the visioplasticity method shows good results for the distribution of effective strain rate and effective strain.

• 소성∙가공
• /
• 제25권1호
• /
• pp.61-66
• /
• 2016

In the current study, we present a new model for the prediction of the strip profile and the residual stresses. This new approach is an analytical model that predicts the residual stresses from the effect of post-deformation. Since the residual stress cannot exceed the yield strength of the material, post-yielding may possibly occur in the post-deformation zone prior to the strip reaching the steady-state zone. The prediction accuracy of the proposed model is examined through comparison with the predictions from 3-D finite element (FE) simulations.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2008년도 추계 학술발표회 제20권2호
• /
• pp.81-84
• /
• 2008

The purposes of this study are to verify a reasonable model of material characteristic and to propose a rational model of reinforcement characteristic considering monotonic and cyclic loading about manufactured reinforcing steel in Korea. Longitudinal reinforcements of the plastic hinge region were behaved tensile deformation and compressional deformation by direction of lateral loading. However Confinement steels were behaved only tensile deformation by lateral loading. Transverse steels were laid the state of tension in the lateral loading of time, and they were laid state that stress is zero when it was removed lateral load. The tests for cyclic tension loading were performed for test variable as yield strength and reinforcement bar sizes. It was estimated that the total strain energy per unit volume was 74 $MJ/m^3$. The modified ultimate concrete compression strain model was proposed based on experimental study of cyclic tension test for manufactured reinforcing steel in Korea.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 1999년도 춘계학술발표대회 논문집
• /
• pp.103-108
• /
• 1999

A synthesized model of pultrusion process considering thermally induced deformatiion was established. The model was composed of liquid resin flow model thermo-chemical analysis and linear elastic analysis. in order to verify the above-mentioned models several experiments were performed. A laboratory scale pultrusion line was established and glass/polyester composites were fabricated. the experimental results were compared with the calculated ones. The model successfully could estimate degree of cure pulling force and amount of process-induced deformation.

• Composites Research
• /
• 제30권6호
• /
• pp.410-415
• /
• 2017

본 연구에서는 탄소섬유강화 복합재의 제작 시 열 잔류응력으로 인한 변형을 유한요소 프로그램 ABAQUS에서 User Subroutine을 이용한 유한요소 해석을 통해 예측한다. 탄소섬유강화 복합재의 변형에 영향을 주는 다양한 요인 중 온도구배, 제품 형상, 적층각 및 적층순서, 수지의 화학수축, 열 잔류응력을 고려한 복합재 성형을 해석하였다. 같은 형상의 실제 모델과 해석 모델의 결과를 비교한다. 또한 해석 결과를 분석하여 실제 제작의 오차에 적용하여 실제 제작에서의 성형 완성도를 높이는데 목적이 있다.

• 한국해양공학회지
• /
• 제14권2호
• /
• pp.76-83
• /
• 2000

this paper was concentrated on the finite element formulation to solve boundary value problems by using the isotropic elasto-plastic damage constitutive model proposed previously(Noh, 2000) The plastic damage of ductile materials is generally accompanied by large plasticdeformation and strain. So nonlinearity problems induced by large deformation large rotation and large strain behaviors were dealt with using the nonlinear kinematics of elasto-plastic deformations based on the continuum mechanics. The elasto-plastic damage constitutive model was applied to the nonlinear finite element formulation process of Shin et al(1997) and an improved analysis model considering the all nonlinearities of structural behaviors is proposed. Finally to investigate the applicability and validity of the numerical model some numerial examples were considered.

• Current Optics and Photonics
• /
• 제5권4호
• /
• pp.391-401
• /
• 2021

In the present study, a hyperelastic constitutive model is built by complying with a simplified hyperelastic strain energy function, which yields the numerical solution for a deformed polydimethylsiloxane (PDMS) membrane in the case of axisymmetric hydraulic pressure. Moreover, a nonlinear equilibrium model is deduced to accurately express the deformation of the membrane, laying a basis for precise analysis of the optical transfer function. Comparison to experimental and simulated data suggests that the model is capable of accurately characterizing the deformation behavior of the membrane. Furthermore, the stretch ratio derived from the model applies to the geometrical optimization of the deformed membrane.