• 한국소음진동공학회논문집
• /
• 제18권1호
• /
• pp.47-56
• /
• 2008

This paper presents a detecting technique for the improvement in quality by appling the various vibrational characteristics theory. The object of this study is to objectively point out faulty gear by developing the program which can be used to analyze and predict the vibrational characteristics caused by gear wear, deformation and nick of auto-transmission. The fault detection methods by vibrational signal analysis of gear have been progressed in the various fields of industry. These methods have the advantage of being easy to attach the accelerometer without discontinuance of the structure. But not all the methods are efficient for finding early faults. So in the thesis, we completed development of the inspection system of vibration by appling the most efficient detecting methods and verified the system's reliability through experiments.

• 패션비즈니스
• /
• 제18권3호
• /
• pp.134-147
• /
• 2014

The aim of this study is to create smart wear that brings out the perspective person's individuality and creativity wearing these garments through various interactions. It is intended to build a prototype for a "Shape-folding Dress", which is length-adjustable skirt that responses with the environment of the wearer. In this process, four basic physical properties can be identified with fabric samples selected which are relatively stiff, including fusible interlining, organdy, silk, and ramie. In addition, two types of folding pattern specimens, "Basic Pattern" and "Diamond Pattern", and heat-steam were used to make the specimens so that the correlation could be calculated by recovery rate among flexing, stiffness and tensile properties. As a result, compared to other fabrics, the silk showed low stress to repeat folding and unfolding process, and its recovery rate of elongation deformation was stable without being affected by the different folding types and twice repeated process. In this study, forming a circuit using an Arduino, illuminance sensor, motors, and pulley, the prototype was created with a silk fabric.

• 한국기계가공학회지
• /
• 제21권9호
• /
• pp.1-11
• /
• 2022

Recently, there has been continuous technological development in the semiconductor industry, and semiconductor manufacturing technologies are being advanced and highly integrated. For this reason, ceramic material having excellent heat resistance, wear resistance, and conductivity are used as components in semiconductor manufacturing. Among them, the probe card's space transformer is used as ceramic material to prevent electronic signal noise during the electrical die sorting of semiconductor function testing. However, implementing a bulk-type space transformer with a thickness of 5.6 mm or more is challenging, and thus it is produced in a structure with a stacked ceramic film. The stacked space transformer has low productivity because it is difficult to ensure hole clogging and a precise shape. In this research, an ultrasonic horn is designed to manufacture a bulk-type ceramic space transformer through ultrasonic drilling. Vibration characteristics were analyzed according to the ultrasonic horn, and the natural frequency was measured.

• 대한치과보철학회지
• /
• 제59권2호
• /
• pp.173-180
• /
• 2021

목적: 본 연구는 반복적인 착탈에 따른 임플란트 bar 어태치먼트에 사용하는 두 가지 부가적인 유지장치의 유지력 특성을 평가해보고자 하였다. 재료 및 방법: 본 연구에서는 새롭게 개발된 유지장치(ADD-Lock; AL)와 기존의 상용화된 유지장치(Locator blue; LB)의 두 가지 유지장치를 평가하였다. 두 개의 고정체를 하부 구조물에 평행하게 위치시키고, 각 유지장치의 patrix를 고정체에 연결하였다. 각 유지장치의 matrix는 대합되는 상부 구조물에 위치시키고 고정하였다. Universal testing machine을 이용하여 초기, 100, 250, 500, 1000, 2000, 2500회의 반복적인 착탈 동안에 각 유지장치의 유지력을 측정하였다. 유지장치의 마모 및 변형 정도는 주사전자현미경으로 관찰하였다. Kruskal-Wallis test, Mann-Whitney U test (α = .05), 그리고 wilcoxon signed-rank test (α = .05)를 이용하여 통계분석 실시하였다. 결과: 초기 유지력과 2500회의 반복적인 착탈 후 유지력에서, AL군(15.24 ± 1.46 N, 9.74 ± 1.16 N)은 LB군(43.53 ± 12.39 N, 22.99 ± 4.77 N)보다 유의하게 작은 값을 보였다(P < .05). 또한, 유지력 소실량에 있어서도 AL군(5.50 ± 1.08 N, 36.08%)이 LB군(20.54 ± 11.89 N, 47.19%)에 비해 낮은 값을 보였다(P < .05). 주사전자현미경 분석 결과, AL군은 patrix에서, LB군은 matrix에서 눈에 띄는 마모 및 변형이 관찰되었다. 결론: Locator는 새롭게 개발된 유지장치보다 높은 초기 유지력을 보인 반면 높은 유지력 소실량을 보였다. 한편, 두 가지 부가적인 유지장치는 반복적인 착탈 후에도 충분한 유지력을 가지는 것으로 나타났다.

• 한국운동역학회지
• /
• 제19권4호
• /
• pp.771-778
• /
• 2009

본 연구는 구두 굽 높이 변화에 따른 보행 시 족저압력을 비교, 분석함으로써 구체적인 데이터를 정량화하여 높은 굽을 착용함으로 인한 전족부의 압력 증가가 발에 미치는 영향을 알아보고자 한다. 본 연구에 사용된 구두는 선행연구를 바탕으로 여대생이 선호하는 구두 굽 높이 3cm, 7cm를 선택하였으며 여대생 10명을 대상으로 발을 전족부와 후족부로 나누어 수직힘, 최대압력, 평균압력을 측정하였다. 그 결과 전족부에서의 평균압력은 7cm 높이 구두가 높게 나타났으며, 후족부에서는 7cm 높이 구두가 낮게 나타났다. 통계처리 결과 전족부위에서는 3cm 굽 높이와 7cm 굽 높이의 최대압력 비교에서 유의한 차이가 나타났으며(p<.05), 후족부위에서는 수직힘, 최대압력, 평균압력 모두 유의한 차이가 나타났다(p<.05). 이상과 같이 구두를 착용함으로서 전족부의 최대압력이 높아지는 것은 물론이고 후족부위의 수직힘, 최대압력, 평균압력도 높아지는 것을 알 수 있었다. 이러한 현상은 전족부위에 높은 압력분포로 구속압이 증가하여 발가락의 변형을 유발할 수 있으며 후족부위에 압력증가는 장시간 착용 시 뒤꿈치의 통증을 유발할 수 있다. 따라서 굽이 있는 구두를 착용할 때 굽 높이가 7cm일 때 보다는 3cm일 때, 굽 높이가 낮을수록 전족부의 변형 예방과 후족부의 통증을 줄일 수 있을 것으로 기대된다.

• 보존과학회지
• /
• 제32권4호
• /
• pp.459-469
• /
• 2016

본 연구는 2014년도에 개발된 문화재 복원용 에폭시 수지를 이용해 충전제에 따른 물성변화에 대해 알아보고, 복원제로서의 적용 가능성을 판단해보고자 하였다. 개발된 수지와 9종의 충전제가 혼합된 퍼티의 물성 결과를 바탕으로 기존 재료들과의 비교를 통해 에폭시 퍼티의 안정성, 우수성 및 적용성에 대해 분석하고 대체 재료로서의 가능성을 확인해 보았다. 물성 측정 결과 접착력과 색상변화량, 경도는 석회, 마모율과 경화 시간은 마이크로 바룬, 인장 강도와 압축 강도는 규조토, 비중은 석고와 백색 무기안료 혼합 충전제가 각각 배합된 재료가 가장 우수한 결과 값을 나타내었다. 특히 마모율에서는 석회를 제외한 모든 재료가 기존 재료에 비해 약 2.5 ~ 20배 정도의 높은 값을 보여 매우 우수한 절삭력을 가진 재료로 판단된다. 또한 경화 시간에서는 약 0.5 ~ 9배를 증진시켜 빠른 경화 시간으로 작업에서의 편리성이 증진되었으며, 수축 및 변형도 일어나지 않고 손에 묻어나는 현상도 개선되어 유물에 대한 안전성도 확보할 수 있었다. 황변현상은 약 0.5 ~ 27배의 낮은 변화량을 보여주어 변화량을 개선하고, 유물과의 이질감 및 재처리로 발생되는 유물의 피로도를 줄여줄 수 있는 재료로 판단된다.

• Elastomers and Composites
• /
• 제46권1호
• /
• pp.45-53
• /
• 2011

실란커플링제인 bis-(3-triethoxysilpropyl)tetrasulfide (TESPT)가 실리카 충전 오일씰용 NBR 복합소재의 물성에 미치는 영향에 대하여 연구하였다. 복합소재의 가교거동과 가교밀도는 ODR (oscillating disk rheometer)과 톨루엔 팽윤비 시험을 통하여 측정하였으며, 기계적 물성은 가황물을 공기 내열 노화 및 ASTM No.3 oil에 내유 노화시켜 시험 전 후 값을 UTM (universal testing machine)과 Shore A 경도계를 사용하여 측정하였다. 오일씰의 성능과 수명에 큰 영향을 미치는 복합소재의 탄성회복은 가황물에 굽힘 변형을 주어 노화시킨 후 시편이 회복되는 길이를 측정하여 회복 각(angle of recovery)을 계산하였으며, 저온에서의 탄성회복거동은 TR (temperature retraction) 시험을 통하여 측정하였다. 또한, Taber식 마모시험기를 사용하여 가황물의 내마모성을 측정하고 SEM(scanning electron microscope)을 사용하여 마모면의 형상을 관찰하였다. 시험결과 실리카가 충전된 복합물에 TESPT가 첨가되면 복합물의 흐름성이 향상되고 실리카와 NBR 간의 상호작용 및 가황물의 가교밀도가 향상되어 가황물의 경도, 100% 모듈러스, 탄성회복성, 내마모성, 내열노화성 및 ASTM No.3 오일에 대한 내유성이 향상됨을 알 수 있었다.

• 농업과학연구
• /
• 제43권4호
• /
• pp.656-664
• /
• 2016

Gear reducers are widely used for various agricultural machinery applications such as greenhouses, tractors, and agricultural vehicles. However, thermal deformation and surface pitting at gear tooth flank frequently occur in gear reducers due to high torque. Thus, surface heat treatment of gears is required to improve wear and fatigue resistance. The objective of this study was to simulate the load capacity of the agricultural gear reducer. The simulation was performed for the following three surface heat treatment methods: untreated gears, nitriding heat treatment, and induction hardening method, those mostly used for agricultural gear reducers. The load capacity of the gear reducer was simulated using the safety factor, limit bending stress, and limit contact stress of the gear. The simulation of the load capacity was conducted using KISSsoft commercial software for gear analysis. The main results of simulation test were as follows: first, the nitriding heat treatment resulted in the highest safety factor for bending stress, which was increased about 77% from those of the untreated gears. Second, the induction hardening was the highest safety factor for contact stress, which was increased about 150% from those of the untreated gears. The safety factor for contact stress of the induction hardening was increased about 64% from those of the nitriding heat treatment. The study result suggested that the surface heat treatments could enhance load capacity and that the method of surface heat treatment should be determined based on simulation results for appropriate use scenarios.

• 한국의류학회지
• /
• 제33권7호
• /
• pp.1038-1049
• /
• 2009

A hat is an important fashion accessory item for a total fashion coordination and the number of millineries is increasing in the current accessory market. This research provides basic information about the millinery in relation to consumer consumption behavior, preference, and satisfaction with hat products. A survey was conducted among 395 individuals age 20 and over who were quota sampled according to age and gender to investigate the differences between genders and different age groups. The collected data were statistically treated with the SPSS 12.0 program in terms of frequency, percentage, mean, standard error, cross tabulation, t-test, one-way ANOVA, and a Duncan-test. The results are as follows: 1. Respondents wear hats for ornamental purposes regardless of the season. They discard hats when they become out of style 2 to 3 years after the purchase. 2. In general, consumers prefer the baseball cap design among various hat product categories. Achromatic colors were the favorite color tone and the preferred material was woven cloth. 3. Consumers were most satisfied with colors and most dissatisfied with deformation after laundering. 4. There was a significant difference in preferences among the different age groups. Younger consumers were more concerned about individual image and style. Older consumers considered hats as a functional means such as protecting themselves from the sun. 5. There was a significant gender difference. Compared to males, female consumers were more concerned about the quality of sewing and colorfastness than male consumers.

• 한국의류학회지
• /
• 제22권2호
• /
• pp.257-266
• /
• 1998

This study was conducted to examine the changes of the mechanical properties of the position in jean slacks during the wear, previously used for the wearing test, which were subjected to repeated tensile-shearing deformation using a simulated fatigue tester has been investigated and compared, by calculating both mechanical properties and hand value(HV) of these fabrics with KES-F system and the by obtaining the THV through these calculated properties. The results are as follows. 1. The fatigue phenomenon of mechanical properties was the LT, 2H B, 2HBS, MMD, SMD, RC values increased, elasticity values of tensile, bending and shearing properties, such as B, G and compression properties LC, WC were reduced. It was shown, then, that those fabrics lost their elasticity and became flexible and soft with the increase of fatigue. 2. The hand value and THV; except anterior knee from all part of KOSHI, NUMERI, FUKURAMI was decreased. 3. The fatigue phenomenon of hand value was different on the position of clothing; on the position of hip, rate of B, G smaller than other parts and KOSHI was decreased, on the part of anterior thigh was FUKURAMI was increased, on the anterior knee RC, NUMERI, THV was increased, on the posterior knee was 2HB, 2HG, 2HGS showed increasedgreater than any other part and on the hem of back, MMD was increased, but NUMERI was decreased. 4. The changing process of mechanical properties in the simulation testing by the fatigue tester has similar tendency to that of the wearing tester. It is concluded that this testing method is useful to predict the fatigue phenomena of fabrics caused by wearing.