• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2003년도 춘계학술대회논문집
• /
• pp.116-119
• /
• 2003

In this study, to achieve the optimal conditions for mechanical hyper-fine pattern fabrication process, deformation behavior of the materials during indentation was studied with numerical method by ABAQUS S/W. Brittle materials (Si, Pyrex glass) were used as specimens, and forming conditions to reduce the elastic restoration and pile-up was proposed. The indenter was modeled a rigid surface. Minimum mesh sizes of specimens are 1-10nm Comparison between the experimental data and numerical result demonstrated that the finite element approach is capable of reproducing the loading-unloading behavior of a nanoindentation test. The result of the investigation will be applied to the fabrication of the hyper-fine pattern.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1995년도 추계학술대회 논문집
• /
• pp.388-392
• /
• 1995

The Electronic Speckle Pattern Interferometry(ESPI) has been applied to many technical problems such as deformation and displacement measurement, strain visualization and surface roughness monitoring. Composite materials have various complicated characteristics depending on the ply materials,ply orientations,ply stacking sequences and boundary conditions. Therefore, it is difficult to analyze composite material. For efficient use of composit materials in engineering applications, the dynamic behavior such as, natural frequencies and modal patterns should be identified. This studying presents FEM results for the free vibration of symmetrically laminated composite as [30/-30/90] $_{s}$. The natural frequencies of laminated composite rectangular plates having the boundary condition(:2-edge clamped) are experimentally obtained. In order to demonstrate the validity of the experiment,FEM analysis using ANSYS was performed and natural frequencies experimentally obtained is compared with calculated by FEM analysis. The results obtained from both experiment and FEM analysis show a good agreement.t.

• Journal of Mechanical Science and Technology
• /
• 제14권5호
• /
• pp.477-482
• /
• 2000

This study discusses a non-contact optical technique (electronic speckle pattern interferometry) that is well suited for thermal deformation measurement without any surface preparation and compensating process. Fiber reinforced plastics ($[0]_{16},\;[0/90]_{8S}$) were analyzed by ESPI to determine their thermal expansion coefficients. The thermal expansion coefficient of the transverse direction of a uniaxial composite is evaluated as $48.78{\times}10^{-6}(1/^{\circ}C)$. Also, the thermal expansion coefficient of the cross-ply laminate $[0/90]_{8S}$ is numerically estimated as $3.23{\times}10^{-6}(1/^{\circ}C)$ that is compared with that measured by ESPI.

• 한국통신학회논문지
• /
• 제25권3B호
• /
• pp.557-564
• /
• 2000

This paper presents a watermarking algorithm for embedding visually recognizable pattern (Mark, Logo, Symbol, stamping or signature) into the image. first, the color image(RGB model)is transformed in YCbCr model and then the Y component is transformed into 3-level wavelet transform. Next, the values are assembled with pattern watermark. PN(pseudo noise) code at spread spectrum communication method and mutilevel watermark weights. This values are inserted into discrete wavelet domain. In our scheme, new calculating method is designed to calculate wavelet transform with integer value in considering the quantization error. and we used the color conversion with fixed-point arithmetic to be easy to make the hardware hereafter. Also, we made the new solution using mutilevel threshold to robust to common signal distortions and malicious attack, and to enhance quality of image in considering the human visual system. the experimental results showed that the proposed watermarking algorithm was superior to other similar water marking algorithm. We showed what it was robust to common signal processing and geometric transform such as brightness. contrast, filtering. scaling. JPEG lossy compression and geometric deformation.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2008년도 춘계학술대회 논문집
• /
• pp.277-280
• /
• 2008

Recently, a demand of nano/micro patterned polymer for display or biochip has been rising. Then many studies have been carried out. Nano/micro-embossing is a deformation process where the workpiece materials is heated to permit easier material flow and then forced over a planar patterned tool. In this work, the hot-emboss process is performed with different forming conditions; forming temperature, load, press hold time, to get the proper condition for linear pattern fabrication on plated-type polymers (PC). Replicated pattern depth increases in proportion to the forming temperature, load and time. Reduction of the workpiece thickness increases according to press hold time. In process of time, reduction ratio of workpiece thickness decreases because of surface area increment of the workpiece and pressure decline on it.

• 한국정밀공학회지
• /
• 제15권9호
• /
• pp.68-74
• /
• 1998

The ESPI(Electronic Speckle Pattern Interferometry) is a real time, full-field, non-destructive optical measurement technique that allows static and dynamic deformation analysis and surface shape measurements of engineering structures. e .g. turbine blades. vehicle engine components, body panels, etc. This technique is very similar to holographic interferometry, but uses a solid static camera and an image processing board for recording and digital processing of speckle patterns. In this paper it is presented that FEM results for the free vibration of symmetrically laminated composite as [30/-30/90]s. The natural frequencies of laminated composite rectangular plates having the particular boundary condition are experimentally obtained. In order to demonstrate the validity of the experiment, FEM analysis using ANSYS was performed and natural frequencies experimentally obtained is compared with calculation by FEM analysis. The results obtained from both experiment and FEM analysis show a good agreement.

• Structural Engineering and Mechanics
• /
• 제50권5호
• /
• pp.605-616
• /
• 2014

When the periodic cellular structure is loaded or swelling beyond the critical value, the structure may undergo a pattern transformation owing to the local elastic instabilities, thus leading to structural collapse and the structure changing to a new configuration. Based on this deformation-triggered pattern, we have proposed the novel composite gel materials. This designed material is a type of architectural material possessing special mechanical properties. In this study, the mechanical behavior of the composite gel periodic structure with various gel inclusions is studied further through numerical simulations. When pattern transformation occurs, it results in a different elastic relationship compared with the material at untransformed state. Based on the obtained nominal stress versus nominal strain behavior, the Poisson's ratio and corresponding deformed structure patterns, we investigate the performance of designed composite materials and the effects of the uniformly distributed gel inclusions on composite materials. A better understanding of the characteristics of these composite gel materials is a key to develop its potential applications on new soft machines.

• 대한기계학회논문집A
• /
• 제37권8호
• /
• pp.1051-1057
• /
• 2013

본 연구에서는 광학적 방법으로 곡면변형률을 측정하고자 할 때, 소재 표면이 임의의 곡면이거나 요철이 많은 경우, 부식이나 오염으로 표면이 불량한 경우, 그리고 고무나 폼, 생체 조직 등과 같이 규칙적인 격자망을 인쇄하기 어려운 경우에도 적용할 수 있는 자동 곡면변형률 측정시스템 'ASIAS-bio'를 개발하였다. 이 시스템은 시편의 재질과 표면상태, 격자 패턴과 크기, 격자 마킹 방법, 변형 정도 등 측정 조건에 관계없이 사용이 가능한 것이 특징이다. 우선 그 신뢰성을 평가하기 위하여 금속판재 성형제품의 변형률 분포를 상용 장비로 측정한 결과와 비교하였다. 또한, 돼지 어깨 관절막, 인체 무릎 피부 등 연질 생체 조직의 변형 측정에 적용함으로써 본 시스템의 유용성을 확인하였다.

• 한국산업정보학회논문지
• /
• 제27권3호
• /
• pp.11-20
• /
• 2022

현재 광고 분야 등에 널리 사용되고 있는 흑백 QR코드의 정보 저장 용량을 증가시키기 위해 칼라 QR코드에 대한 연구가 활발히 진행되고 있다. 그러나 칼라 QR코드는 프린팅 또는 스캐닝 과정에 의해 복재가 될 수 있으며, 이 과정에서 불충분한 조도에 의한 색상 왜곡과 잡음, 카메라의 낮은 해상도와 기하학적 변형의 가능성이 있다. 이러한 일련의 복합적인 과정들은 품질 저하와 인식률 저하를 초래한다. 이러한 문제점을 극복하기 위해 본 논문에서는 칼라 QR코드에 패턴 삽입을 고려하고, 이를 위한 효과적인 인식 방법을 제안한다. 또한, 제안한 방법을 통해 기존에 다루어진 대표적인 패턴을 도입하고, 인식률 측면에서 실험을 수행하여 그 결과를 비교 분석한다. 즉, 인식과정에 있어서 쉽게 초래되는 가우시안 잡음과 블러링, 기하학적 변형 등의 잡음을 고려하여 성능을 비교 분석한다. 다양한 실험을 통해 가우시안 잡음과 블러 측면에서 단순한 패턴의 칼라 QR코드가 우수한 성능을 보이는 것을 확인할 수 있다.

• 대한토목학회논문집
• /
• 제29권4D호
• /
• pp.555-561
• /
• 2009

굴착된 터널 형상 재현에서 단면의 종단 데이터는 터널의 유지를 위해서는 아주 중요하다. 터널이 완성되기전에 설계된 모델을 고려한 완성된 터널의 변형이 고려되어져야 한다. 그리고 변형은 터널 단면 전체를 따라 연속적으로 나타날 수 있다. 본 연구에서는 먼저 수학적 분석으로 접근하였고, 그것을 관측된 터널단면 데이터에 실험 하였다. 그 다음 선추적 방법, 유전자 알고리즘, 패턴 추적 방법 등으로 3D 터널 형상 재현을 비교하였다. 수학적 방법론은 철도 터널과 같은 간단한 원통형은 쉽게 해결이 되었으나, 도로터널과 같은 더욱 복잡한 모델(복심 곡선형과 비원통형)은 구속된 상태하에서 소프트 컴퓨팅 툴을 가지고 해결할 수 있었다. 유전자 알고리즘과 직접탐색법은 많은 계산 시간이 걸렸으나 복잡한 상태하에서 더욱 유연함을 보였으며, 선추적 방법은 초기값들이 제한된 범위 하에서 가장 빠르게 계산되어졌다.