• Journal of the Korea Institute of Military Science and Technology
• /
• v.14 no.6
• /
• pp.1114-1120
• /
• 2011

Shaped Charge's penetration performance is depended on the shape of warhead and explosive, liner materials. The liner that manufactured to small homogeneous grain increase the penetration performance and decrease the deviation of penetration performance. This texture is obtained by forging process but, creating the process that remove crack and get small homogeneous grain is very hard. In this study, We success to get the homogeneous small grain texture through appling the most suitable process by DEFORM CODE analysis.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1997.04a
• /
• pp.557-561
• /
• 1997

In this study, using DEFORM and PAM-STAMP drawbead analysis is carried out for the commercial code availability. The three drawbead types, single circular drawbead, single square drawbead and double circular drawbead, are examined. The clamping force, drawing force and effective strain of sheet metal which is passed by drawbead are checked on each drawbeads.

• Journal of the Korean Society for Heat Treatment
• /
• v.20 no.4
• /
• pp.175-180
• /
• 2007

The hardness of cold-forged products is in close relationship with its effective strain. This study presented the estimating method of hardness for cold-forged SKH9 products without hardness tests in view of resistance to plastic deformation using finite element code, DEFORM$^{TM}$. The flow stress equation obtained from the compression test was only used as a basic data to estimate the relationship between effective strain and hardness. In addition, this new estimating method was applied to the cold-forged product which was widely used in industrial field to show the feasibility. As a result, the predicted hardness numbers through FE simulation showed good agreement with the measured hardness numbers. It is possible to estimate the hardness not by hardness tests, but by only computer simulations for the deformed products. Also, effective strain values were possibly estimated by measuring hardness numbers, and vice versa.

• The Journal of the Korea Contents Association
• /
• v.7 no.12
• /
• pp.322-332
• /
• 2007

We consider a deformation method suitable for fractal. In IFS fractal, the position of a point is characterized by its code as well as by its coordinates. Code has a meaning of address for fractal. If we move a point by changing its code, the resulting movement shows fractal behavior. We propose three deformation methods based on code information. For the deformation vector of a point in fractal, 1) we use the vector of a given vector field at the point obtained by code transformation, 2) we use the vector constructed by adding predefined displacement vectors according to the code information of the point. Both methods show a fractal-like character as well as an ordinary continuous deformation character. Also, 3) we can deform fern-fractal more naturally by restricting its deforming region using code form.

• Proceedings of the KSME Conference
• /
• 2000.04a
• /
• pp.866-872
• /
• 2000

Superplastic forming processes by characteristic of low flow stress and high elongation have advantages to reducing on production cost and weight because of the product of complex form could be made in one part. However superplastically termed part has a characteristic of non-uniform thickness distribution along forming direction. Especially. since the thickness distribution affects on mechanical properties of product. the uniform thickness is very important. There are two solution procedure of implicit and explicit procedure to analyze the superplastic forming. In this study to analyze the thickness distribution two kinds of commercial programs of DEFORM and PAM-STAMP which implicit and explicit code are used respectly. The results from the two Programs were compared with eath other As a result implicit code were more suitable than explicit code for superplastic forming analysis.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1995.10a
• /
• pp.210-213
• /
• 1995

In this study,the effect of both process parameters (wheel velocity, friction coefficients between die and billet, etc) and die-shape (abutment height and shape, flash gap, etc.) on the surface defect on forming process is theoretically investigated. For this work, computer simulation was performed by using the DEFORM, a commercial FEM code. Through numerous simulations with different parameters and die shapes, We propose one optimal die shape for CONFORM process which can remove surface defect.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 1999.03b
• /
• pp.120-123
• /
• 1999

The precision cold forging process for steering yoke of automobile has been analysed by using rigid-plastic finite element analysis code DEFORM-3D Also the experiment has been performed through the optimized process. Until now steering yoke has been largely manufactured by hot forging or welding of forged head and shaft parts because of technical difficulty. the study has shown successful results of the precision cold forging through the proper selection of the process.

• Proceedings of the KSR Conference
• /
• 1999.11a
• /
• pp.391-397
• /
• 1999

Rails are produced by several rolling processes. These processes play an important role on the performance of rails. We analysed the rolling processes by finite element code, DEFORM. The distributions of temperatures and effective strains are obtained. After the rolling processes, the rails are sent to the cooling bed. During the cooling, the rails are bended and twisted. These bending and twisting should be minimized to produce a high quality rail. The analyses of cooling processes and residual stresses produced through the rolling processes will be Presented in the next paper.

• Journal of Advanced Marine Engineering and Technology
• /
• v.36 no.6
• /
• pp.802-807
• /
• 2012

Self-piercing rivet is sheet joining method. It is being used more to join aluminum alloy sheets. Self-piercing riveting is a large-deformation process that involves piercing. The self-piercing rivet, under the press from the punch, pierces the top sheet and forms a mechanical interlock with the bottom sheet. In this study, forging process was designed for manufacturing self-piercing rivet. The forging process has been simulated by using commercial FEM code DEFORM-2D. In simulation of forging process for manufacturing rivet, process sequence, formability, forging load, and distributions of stress and strain were investigated. The suitable forging process could be designed by comparisons of simulation results. The developed process consists of four stages: upsetting, first chamfering, back extrusion, and second chamfering. The simulated results for forging process were confirmed by experimental trials with the same conditions.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.7 no.3
• /
• pp.298-307
• /
• 2006

TEE Forming process for HDPE(High Density PolyEthylen) pipe has been analyzed by using rigid plastic finite element code, DEFORM-3D. TEE of HDPE pipes is necessary to connect main pipe with branch pipe and change the flow direction of hot water. A HDPE pipe is used as a insulator to maintain the temperature of hot water A butt welding process through TEE forming for a HDPE pipe is a updated process improving the strength of welding part compared to conventional extrusion welding process. The Experiment of Hot and Cold Forming have been performed. The design parameters such as a initial hole shape have been obtained through rigid-plastic finite element analysis, which is applied to the actual manufacturing process.