• Korean Journal of Optics and Photonics
• /
• v.13 no.3
• /
• pp.182-188
• /
• 2002

We have analyzed the phase-calculation-error of a three-dimensional shape measurement system using the projection of phase shifted fringe patterns. In this study, we have dealt various errors; an error caused by the variation of quantization levels, an error caused by the defocus of fringe pattern projected images, an error caused by phase-shifting errors, an error caused by the intensity variation of the background and modulation amplitude of fringe pattern projected images during the projection of multiple patterns, an error caused by the distortion of sinusoidal shape of a fringe pattern. The results will contribute to the design of a three-dimensional shape measurment system and give an important meaning to the calculation and the analysis of the accuracy of a system.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.32B no.6
• /
• pp.886-898
• /
• 1995

One of the ways to measure the distance in the computer vision is to use the focus and defocus. There are two methods in this way. The first method is caculating the distance from the focused images in a point (MMDFP: the method measuring the distance to the focal plane). The second method is to measure the distance from the difference of the camera parameters, in other words, the apertures of the focal planes, of two images with having the different parameters (MMDCI: the method to measure the distance by comparing two images). The problem of the existing methods in MMDFP is to decide the thresholding vaue on detecting the most optimally focused object in the defocused image. In this case, it could be solved by comparing only the error energy in 3x3 window between two images. In MMDCI, the difficulty is the influence of the deflection effect. Therefor, to minimize its influence, we utilize two differently focused images instead of different aperture images in this paper. At the first, the amount of defocusing between two images is measured through the introduction of regularization and then the distance from the camera to the objects is caculated by the new equation measuring the distance. In the results of simulation, we see the fact to be able to measure the distance from two differently defocused images, and for our approach to be robuster than the method using the different aperture in the noisy image.

• Journal of the Microelectronics and Packaging Society
• /
• v.21 no.4
• /
• pp.63-68
• /
• 2014

For a nanoscale Cu/low-k wafer, inter-layer dielectric (ILD) and metal layers peelings, cracks, chipping, and delamination are the most common dicing defects by traditional diamond blade saw process. Sidewall void in sawing street is one of the key factors to bring about cracks and chipping. The aim of this research is to evaluate laser grooving & mechanical sawing parameters to eliminate sidewall void and avoid top-side chipping as well as peeling. An ultra-fast pico-second (ps) laser is applied to groove/singulate the 28-nanometer node wafer with Cu/low-k dielectric. A series of comprehensive parametric study on the recipes of input laser power, repetition rate, grooving speed, defocus amount and street index has been conducted to improve the quality of dicing process. The effects of the laser kerf geometry, grooving edge quality and defects are evaluated by using scanning electron microscopy (SEM) and focused ion beam (FIB). Experimental results have shown that the laser grooving technique is capable to improve the quality and yield issues on Cu/low-k wafer dicing process.

• Korean Journal of Optics and Photonics
• /
• v.15 no.1
• /
• pp.56-62
• /
• 2004

We present a diffraction grating interferometer of large equivalent wavelength specially designed for flatness testing of rough surfaces. Two transmission diffraction gratings are illuminated on the object under test by use of two measurement beams with different angles of incidence, which yields a large equivalent wavelength. This interferometer design minimizes unnecessary diffraction rays and the systematic error caused by the diffraction gratings, and provides a large working distance and easy alignment. To improve the measurement accuracy, phase shifting technique is applied and the equivalent wavelength error caused by defocus is calibrated. Test results obtained from mirror surfaces and machined rough surfaces are discussed.

• Laser Solutions
• /
• v.5 no.1
• /
• pp.33-42
• /
• 2002

In order to investigate the characteristics of the plasma induced by lap-joint CO$_2$ laser welding of automotive steel sheets, the effects of welding speed, shield gas flow rate, gap size, and laser beam defocus to plasma intensity emitted from keyhole have been investigated. The plasma light is measured by fiber and photodiode. Also, the plasma images were captured by the high speed digital camera in 1000frames/sec in order to correlate the plasma light signal with plasma pattern. From the results, it is observed that the difference of the plasma intensity for between the deep penetration and partial penetration exists from 1.2 to 2 times. The plasma light intensity decreased in case of the deep penetration Is observed due to the exhausting of the plasma gas under the sheet. On the other hand, under the conditions of the deep penetration, the plasma intensity is significantly increased by controling the conditions decreasing the penetration depth. It was specially founded that the effect of 0.3mm gap size at partial penetration condition is approximately similar to deep penetration in 0mm gap. It is concluded that the plasma intensity is able to evaluate the penetration depth in lap-joint welding and appears to offer the most straightforward correlation to the welding process.

• Journal of the Optical Society of Korea
• /
• v.20 no.1
• /
• pp.101-106
• /
• 2016

A pupil filter is a useful technique for modifying the light intensity distribution near the focus of an optical system to realize depth of field (DOF) extension and superresolution. In this paper, we proposed a new design of the phase only pupil filter by using Zernike polynomials. The effect of design parameters of the new filters on DOF extension and superresolution are discussed, such as defocus Strehl ratio (S.R.), superresolution factor (G) and relative first side lobe intensity (M). In comparison with the other two types of pupil filters, the proposed filter presents its advantages on controlling both the axial and radial light intensity distribution. Finally, defocused imaging simulations are carried out to further demonstrate the effectiveness and superiority of the proposed pupil filter on DOF extension and superresolution in an optical imaging system.

• Journal of Advanced Marine Engineering and Technology
• /
• v.30 no.5
• /
• pp.629-635
• /
• 2006

Manufacture of motor by laser has been studying realization that was demands on market for lightening and miniaturization. Moreover. early in the 1980s. manufacture of parts for automobiles by laser welding was already successfully introduced. The purpose of this study was to develop production technology of the high quality laminated stator core for motor by pulsed Nd:YAG laser heat source. In the event of adjusting defocus and voltage to control humping in laser welding of the laminated core. sound bead could be obtained. but deep penetration was not. Therefore. explosive evaporating plasma was controlled by adjustment of peak power on pulse width. Particularly, because explosive evaporating plasma induced high peak power, made molten metal in keyhole scatter. a suitable adjustment of peak power was required to obtain sound bead. As a results of experiment. sound bead and deep penetration could be obtained.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2012.07a
• /
• pp.275-278
• /
• 2012

본 논문에서 2D-3D 자동 영상 변환을 위하여 2D 상으로부터 깊이 지도(depth map)을 생성하는 방법을 제안한다. 제안하는 방법은 보다 정확한 깊이 지도 생성을 위해 영상의 전경 깊이 지도(foreground depth map)와 배경 깊이 지도(background depth map)를 각각 생성 한 후 결합함으로써 보다 정확한 깊이 지도를 생성한다. 먼저, 전경 깊이 지도를 생성하기 위해서 라플라시안 피라미드(laplacian pyramid)를 이용하여 포커스/디포커스 깊이 지도(focus/defocus depth map)를 생성한다. 그리고 블록정합(block matching)을 통해 획득한 움직임 시차(motion parallax)를 이용하여 움직임 시차 깊이 지도를 생성한다. 포커스/디포커스 깊이 지도는 평탄영역(homogeneous region)에서 깊이 정보를 추출하지 못하고, 움직임 시차 깊이 지도는 움직임 시차가 발생하지 않는 영상에서 깊이 정보를 추출하지 못한다. 이들 깊이 지도를 결합함으로써 각 깊이 지도가 가지는 문제점을 해결하였다. 선형 원근감(linear perspective)와 선 추적(line tracing) 방법을 적용하여 배경깊이 지도를 생성한다. 이렇게 생성된 전경 깊이 지도와 배경 깊이 지도를 결합하여 보다 정확한 깊이 지도를 생성한다. 실험 결과, 제안하는 방법은 기존의 방법들에 비해 더 정확한 깊이 지도를 생성하는 것을 확인할 수 있었다.

• Journal of the Semiconductor & Display Technology
• /
• v.19 no.3
• /
• pp.7-11
• /
• 2020

Enormous methods have been proposed for the detection and segmentation of blur and non-blur regions of the images. Due to the limited available information about the blur type, scenario and the level of blurriness, detection and segmentation is a challenging task. Hence, the performance of the blur measure operators is an essential factor and needs improvement to attain perfection. In this paper, we propose an effective blur measure based on the local binary pattern (LBP) with the adaptive threshold for blur detection. The sharpness metric developed based on LBP uses a fixed threshold irrespective of the blur type and level which may not be suitable for images with large variations in imaging conditions and blur type and level. Contradictory, the proposed measure uses an adaptive threshold for each image based on the image and the blur properties to generate an improved sharpness metric. The adaptive threshold is computed based on the model learned through the support vector machine (SVM). The performance of the proposed method is evaluated using a well-known dataset and compared with five state-of-the-art methods. The comparative analysis reveals that the proposed method performs significantly better qualitatively and quantitatively against all the methods.

• Journal of the Optical Society of Korea
• /
• v.19 no.5
• /
• pp.487-493
• /
• 2015

A wavefront coding (WFC) technique provides an extension of the depth of field for a microscopy imaging system with slight loss of image spatial resolution. Through the analysis of the relationship between the incidence angle of light at the phase mask and the system pupil function, a mixing symmetrical cubic phase mask (CPM) applied to 5X-40X micro-objectives is optimized simultaneously based on point-spread function (PSF) invariance and nonzero mean values of the modulation transfer function (MTF) near the spatial cut-off frequency. Optimization results of the CPM show that the depth of field of these micro-objectives is extended 3-10 times respectively while keeping their resolution. Further imaging simulations also prove its ability in enhancing the defocus imaging.