• Journal of Environmental Science International
• /
• v.18 no.5
• /
• pp.509-515
• /
• 2009

The aim of this study is investigated greenhouse gas emissions of glass industry, and when calculates greenhouse gas emission, using formula(Tier 3) advising in IPCC(Intergovernmental Panel on Climate Change) and using self designed formula(Tier 3+) authors of this study. Studied to propose calculation formula that can compare these two calculation results and apply to domestic. Formula of Tier 3 calculated to theoretical composition of carbonate material, And Formula of Tier 3+ calculated on the basis of chemical substance formation table that get from glass manufacture company(The S company). As a result, Dolomite, Soda ash, Limestone, Industrial Barium carbonate is calculated value of Tier 3+ lower than value of Tier 3, And Industrial Potassium carbonate, Industrial Strontium carbonate was calculated value of Tier 3 lower than value of Tier 3. This study finding, formula of Tier 3+ has higher confidence than formula of Tier 3 when consider revision about purity of injection raw material. And hereafter, When calculate greenhouse gas emissions about nonmetallic mineral industry, use of Tier 3+ is considered that should be encouraged.

• The Journal of Society for e-Business Studies
• /
• v.20 no.2
• /
• pp.27-36
• /
• 2015

Current leakage of industrial technologies with revealing state secret against nation is gradually increasing and scope of the spill is diversified from technology-oriented leakage to new economic security sector like information and communication, electrical and electronic, defense industry, illegal export of strategic material, economic order disturbance by foreign country, infringement of intellectual property, etc. So the spill damage can affect not only leaked company but also national interests and entire domestic industry. According to statistics from National Industrial Security Center of National Intelligence Service, a major cause of technology leakage is not only by external things about hacking and malignant code, but internal leakage of former and current employees account for about 80%. And technology leakage due to temptation of money and personal interests followed by technology leakage of subcontractor is steadily increased. Most studies in the field of security have tended to focus on measuring security capability of company in order to prevent leakage core assets or developing measurement Indicators for management rather than security activities of the company members that is most important. Therefore, this study analyzes the effect of most underlying security education in security activities on security capabilities of enterprise. As a result, it indicates that security education have a positive(+) correlation with security capabilities.

• Convergence Security Journal
• /
• v.15 no.6_2
• /
• pp.141-149
• /
• 2015

Modern society is to have an significant impact on the competitiveness of the country in which the economic value is very high occupancy and ensure a state-of-the-art science and technology. The country's core technology or industry security crimes going seized state-of-the-art technology firms can threat of damage to the country's economic security. In particular, the defense industry serious crime that is directly related to national security. The company's core technology and trade secrets leaked once the industrial countries must prevent security breaches and offenses of strict punishment measures because it is impossible to recover. Also, some advanced countries directly has been operating industrial security crime for the country's economy and national security. In recent years, Nation core technology infringement cases are rapidly increasing in the country. In addition, industrial security crime threat to national security. Therefore, the industry security crimes damage to the national security that infringe on the business secrets of core technologies and businesses. It is necessary to identify that industry security crime associated with the visibility of the broad scope of intellectual property protection.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.10
• /
• pp.471-479
• /
• 2020

In this paper, we analyze features of radical innovative businesses using their patents. Although patents have been used to evaluate outcomes of businesses from the 1980s, it is challenging to use patents for radical innovations. We examined the possibility of taking advantage of patents for an indicator that represents a radical innovation in pharmaceutical industry. To this end, we collected FDA approval data from the U.S. Food and Drug Administration and patent data of 18 pharmaceutical companies. For analysis, we utilized the network centrality analysis and Wilcoxon signed ranked test, which is a non-parametric statistical hypothesis test used to compare two related samples. We observed that a radical innovative company typically cooperates with other research groups, such as universities and companies, and acts as a hub for connectivity in pharmaceuticals. Also, we found that there are differences in centrality between radical firms and non-radical firms. Thus, we expect that the results of this study will help in developing strategies for research and development of pharmaceutical companies and identifying factors affecting radical innovation in the future.

• Journal of Digital Convergence
• /
• v.19 no.10
• /
• pp.545-554
• /
• 2021

The purpose of this study was to empirically examine the effects of CSR activities on a defense manufacturing employees' organizational trust and job satisfaction and the mediating effect of organizational trust. To conduct such examinationusing, 289 valid samples collected from field employees of H-company(defense manufacturer) in Chang Won. The empirical analysis results are summarized as follows. First, corporate CSR activities were found to affect job satisfaction of field employees. Second, corporate CSR activities were analyzed to be a very important motivator for field employees. In other words, it can be interpreted that employees who perceive that their organization is actively fulfilling social responsibilities have a high level of perception of organizational trust. Third, it was found that the higher the organizational trust of the employees, the higher the job satisfaction. Fourth, as a result of verifying whether there is a mediating effect of organizational trust in the relationship between corporate CSR activity and job satisfaction, it was found that the full mediating effect and the partial mediating effect were mixed.

• Journal of Korean Society for Quality Management
• /
• v.39 no.4
• /
• pp.516-526
• /
• 2011

The AS9100 standard builds upon the ISO 9001:2000 quality management system requirements(in their entirety) and defines additional quality management system requirements for the aerospace industry. The 9100 standard on quality management system requirements is intended to be used at all levels of the supplier chain. The International Aerospace Quality Group has released a revision to 9100 for the aviation, space and defense industries. This change aims at improvement on quality, schedule and cost performance by adopting new requirements based on stakeholders' needs. This paper is to review how the AS9100 QMS Requirement has been established and improved, and to communicate the significant changes from AS9100, Rev. B to Rev. C focusing on reasons for revisions. The proposed schedule and considerations on the transition of the changes to Rev. C are also dealt with in this paper.

• Korean Journal of Metals and Materials
• /
• v.48 no.6
• /
• pp.514-522
• /
• 2010

Graphite epoxy composite material (GECM) shows high specific strength and its application in the aerospace industry is gradually increasing. However, its application would induce galvanic corrosion between GECM and metallic materials. This work focused on the effects of anodizing and thermal oxidation on galvanic corrosion in a 3.5% NaCl solution between GECM and aluminium and titanium. In the case of anodized aluminium, galvanic corrosion resistance to the GECM was greatly improved by the anodizing treatment regardless of area ratio. In the case of anodized titanium, the anodizing by a formation voltage of 50V increased corrosion resistance of titanium in galvanic tests. Thermal oxidation of titanium also improved corrosion resistance of Ti to GECM.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.10
• /
• pp.179-186
• /
• 2019

Based on the characteristics of the weapon system, a government-funded research institute or a defense industry company is selected as the R&D supervision institution. On the other hand, research for the selection of a R&D supervision institution has not been conducted actively. This paper proposes a methodology for selecting R&D supervision institutions, such as procedure and indices. First, candidates of the index were obtained using data investigation and consulting, and five indices were deduced using Delphi. The weight of the indices was set using AHP. The high element consisted of 'Technical elements' and 'Business element'. The low element of 'Technical elements' consisted of 'Possession and readiness of critical technology' and 'Experience of similar R&D'. The low element of 'Business element' consisted of 'Base circumstance of the project', 'Risk management', and 'Will for the project'. The total weights of the indices were 'Possession and readiness of critical technology' 0.405, 'Experience of similar R&D' 0.297, 'Base circumstance of the project' 0.124, 'Risk management' 0.127, and 'Will for the project' 0.047. The indices were applied to the 00 weapon system and the result was deduced.

• Journal of Aerospace System Engineering
• /
• v.18 no.2
• /
• pp.21-28
• /
• 2024

In light of the rapid development of the space industry, there has been increased attention on small satellites. These satellites rely on components that are considered to have lower reliability compared to larger-scale satellites. As a result, predicting reliability becomes even more crucial in this context. Therefore, this study aims to compare three reliability prediction techniques: MIL-HDBK-217F, RiAC-HDBK-217Plus, and FIDES. The goal is to determine a suitable reliability standard specifically for nano-satellites. Furthermore, we have refined the quality assurance factors of the manufacturing company. These factors have been adjusted to be applicable across various industrial sectors, with a particular focus on the selected FIDES prediction standard. This approach ensures that the scoring system accurately reflects the suitability for the aerospace industry. Finally, by implementing this refined system, we confirm the impact of the manufacturer's quality assurance level on the total failure rate.

• Journal of the Korean Society of Systems Engineering
• /
• v.9 no.2
• /
• pp.23-36
• /
• 2013

Plant industry is one of technology-intensive and most prosperous industries in Korea because of its recent prosperity and promising outlook in export. However, no Korean EPC company has yet been well prepared in lifting their capacity sufficient enough to get the upstream conceptual or basic design and engineering orders for sizable plant projects which are known as the more value-added. If systems engineering, a methodology which developed complex systems such as airplanes and has been justified its effectiveness in Defense and NASA projects, can be integrated with plant engineering which should be developed and applied based on the requirements of so many stakeholders, conditions, lifecycle concepts, and constraints of the projects, huge synergic effect is expected particularly in developing a specific upstream design, which is a conceptual or basic design. The notion of integration with each other between systems engineering and plant engineering can be really the crux of EPC's success in any plant projects. This paper suggests an approach showing a methodology how to dig out, analyze, evaluate, verify and implement the stakeholders' requirements into a plant design in conceptual phase using the theory and skills of systems engineering. ISO/IEC 15288 well known systems engineering standards is used. Carbon capture system is used for a case study, for it is an emerging technology in reducing emissions of carbon dioxide causing global warming from flue gas after combustion. Here systems engineering was proven to play a substantial role in enhancing the capability of designers in developing a conceptual design of whole plant or certain part of crucial plant systems.