• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.8 no.2
• /
• pp.185-196
• /
• 1997

By considering the definition and application of resolution as well as the concept and theory of SAR, the essential contents of the SAR design and analysis are described. This paper is to compare and analyze the resolution performance capability of three techniques for achieving azimuth resolution such as the real aperture, the unfocused and the focused techniques, through the simulation. Simulation is performed to make the restricted conditions for the unfocused technique that can be implemented by the less commputing load of signal processingand the lower cost. Through the mission analysis, the use of SAR image can be applied for estimation of whole situation at the regional area in the field of military demands for tactical purpose as well as civilian demands for the damage of disaster. RPV and sall or medium aircraft are selected to carry the SAR for these purposes and the proper resolution turns ou 5~15 m. The trade-off study of variables through the simulations results in the proper conditions such that range is less 3, 000 m, Wavelength is 1~10 m, and the raw signals and results processed by three techniques for two point targets are exhibited undr such conditions. Therefore, at some points, the result of this paper si proposed for useful applications of unforcused technique in the restricted conditions except the identification of the small target at a long range re- quired for high resolution.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.10
• /
• pp.531-538
• /
• 2017

In the case of hydraulic pressure type fuse, we accept or reject certain product lots by considering the number of defective products in the operating pressure test. Generally, this procedure, known as 'The inspection by attributes', has been most commonly used in the field of quality assurance of products. However, the method of inspection by attributes suffers because it tests more samples than inspection by variables. Even though the quality of the products has remained stable in the process condition, the same number of samples is required for every lot, which wastes time and money. This paper suggests that the lot acceptance procedure is changed from inspection by attributes to inspection by variables. We can calculate the statistical tolerance percent of defectives and compare this to the Acceptable Quality Level (AQL) in order to save money and time. It is also easier to monitor and control the quality of products by using the process capability index and x-bar charts. In conclusion, the procedure delivers mutual benefit to both the customer and the producer by securing high quality products and reference data.

• Journal of Korean Academy of Nursing
• /
• v.22 no.3
• /
• pp.237-388
• /
• 1992

This study was done to identify the degree of congruence between nurses and patients on patients' health problems. The purposes of this study were 1. To compare the health problems of parturient women as identified by interview and in the nursing record. 2. To compare the health problems of patients who have had gynecological surgery as identified by interview and in the nursing record. 3. To compare the health problems of chemotherapy patients as identified by interview and in the nursing record. The design of this study was a comparative descriptive design. The subjects were 205 Obstetric-Gynecologic patients. The tool for this study was an 11 item questionnaire, including one open ended question on the patient's problem during the past one day. Data was collected through interviews and an audit of the nursing records during the period from March 22, 1992 to April 29, 1992. Data was analyzed using by frequencies and percentiles. The result of this study were summarized as follows : Pain was the most prevalent complaint for parturient women by interview(60.3% ) and from the nursing records(83.2%). There was no record in the nursing records about the complaints of lack of information and emotional problems even though there were complaints of communication problems (17.6%) and of emotional problems(3.5%) identified in the interviews but there were more records of cardiopulmonary problems in nurses record(9.1%) than the patient interviews (3.3%). In the nursing records 25.9% of the identified records identified pain problems compared with 23.3% in the interviews. In the nursing records, 22.3% of the records identified nutrition problem as compared with 18.2% in the interview. There were only a very few emotional problem identified in the nursing records (3.7%) as compared to 18.2% in the interviews. There were no comments about communication problems in the nursing records but 5.2% of the subjects mentioned of communication problems in the patient interview. There were problems in five categories for the parturient women ; comfort, communication, activity and rest, elimination, emotions, and there were problems in ten categories for the surgery patients : comfort, elimination, communication, emotions, nutrition, cardiopulmonary, thermoregulation, physical integrity, host defense and activity /rest. There were also problems in the same ten categories for chemotherapy Patients. On the other hand, in the nursing records, only comfort activity /rest, and elimination problems were identified for the parturient women, there were only seven categories of problems : comfort, elimination, cardiopulmonary, activity /rest, and nutrition for the gynecology surgical patients, and for the chemotherapy Patients, comfort, nutrition, physical integrity, cardiopulmonary, activity /rest, thermoregulation, emotion and elimination were the categories identified, and no communication problems were identified. It was found that there was low congruence between the patients' problems as identified through patient interview and as recorded in the nursing records. Therefore it can be concluded that the main content of the nursing records is the physical problems of the patients and this is not in congruence with the patients' reported problems in the emotional and communication domain.

• Korean Security Journal
• /
• no.39
• /
• pp.269-294
• /
• 2014

Korea is concerned with information security industry due to recent leak-out private information of 3 card companies. Executives are aware of damage from breach of security such as personal data spill, is more dangerous than any other financial risks. The information security industry, which was limited in physical security and network security formerly, is evolving into convergence security of public and facility security industry. The field of interest has also been changed into security of smart phone and intelligence image recently, from firewall or Anti-virus. The convergence security is originally about access control of facility, but recently its demand has been increased mostly by public institutions and major companies. The scope of the industry also varies from finance, education, distribution, national defense, medical care to automobile industry. The market of convergence security has been expanded and new various products and services of security of intelligent vehicle, 'U' healthcare, finance, smart grid and key industries are also developed. It is required to create and enhance of new curriculum and cultivate human resources for the development of knowledge information security industry. Raising standard of education and security consciousness of the nation is also necessary to strengthen the global competitiveness.

• Journal of Society of Preventive Korean Medicine
• /
• v.21 no.2
• /
• pp.23-34
• /
• 2017

Objectives : The aim of this study was to survey the present utilization of pattern identification(PI) by chronic disease and using PI system in the clinical field among Korean medicine doctors. Methods : This survey was conducted from Oct. 1 to Oct. 31, 2014 by face-to-face interview using structured questionnaire. The subjects were 400 Korean medicine doctors who worked in hospitals or clinics. The questionnaire consisted of whether use clinical experience by chronic disease and the utilization of PI, the utilization of PI systems, the PI utilization rate, and the correlation between utilization PI and so on. General elements consisted of sex, age, clinical experience, place of work, district and so on. Results and Conclusions : This study revealed that clinical experience by chronic disease used 24.0-90.8%. The most chronic diseases were chronic fatigue and chronic pain, and least disease was cancer. Experience of the utilization of PI among Korean medicine doctors who have clinical experience was 87.8-97.1%. Also, the most utilized disease was chronic gastritis & gastric ulcer, and least disease was dyslipidemia. In this case, the most common cases were using the one PI between the utilization of PI systems, and the utilization ratio of Visceral PI was the highest. Phi coefficient between the PI systems in chronic diseases divided into positive correlation and negative correlation. The correlation of dementia between Triple energizer PI and Six excesses PI was the highest at positive correlation, and the frequency of occurrence between Defense, Qi, Nutrient and Blood PI was the highest at positive correlation. The correlation of osteoarthropathy between Meridian and Collateral PI and Sasang Constitutional Medicine was the highest at negative correlation. Also the frequency of occurrence between Qi, Blood, Fluid and Humor PI and Sasang Constitutional Medicine was the highest at negative correlation. We hope that additional studies on systematic PI research of chronic disease which needed to be in korean oriental medicine and meet the needs of clinical consumer continue based on this study.

• The Journal of the Korea Contents Association
• /
• v.20 no.3
• /
• pp.491-505
• /
• 2020

The purpose of this study is to develop an evaluation index that can assess the Army training program of Green Camp. The result of the evaluation index phased-developed with the CIPP model is summarized below. First, the literature review with documents relevant to program evaluation, Green Camp field research, and expert discussions were used to select factors considered for evaluation and develop a preliminary evaluation area and item for the four areas within the CIPP evaluation model. Second, an initial survey targeting Green Camp and soldiers in the Capital Defense Command examined the preliminary reliability·validity, and the Focused Group discussions were used to supplement the evaluation index. Third, secondary surveys were conducted in four battalions in Gangwon-do and third surveys targeted officers from twelve different corps and personnels related to the Green Camp which verified descriptive statistics analysis, exploratory factor analysis, and correlation analysis in version SPSS 24. Fourth, with the validation verification procedure, 16 evaluation area and 36 evaluation index was confirmed. Fifth, the 36 evaluation index developed was subdivided into 57 indexes and the Delphi method was applied through the policy expert to formulate 43 generalized indexes. The significance of this phased research approach was considered for the institutionalization of the usage of scientific evaluation(index) and development in policy process.

• Journal of the Korean Chemical Society
• /
• v.45 no.3
• /
• pp.256-263
• /
• 2001

The STS contents, emphasized in the 6th curriculum, in the chemistry parts of general science textbooks were analyzed. The STS contents of textbooks showed average of 24.4%. The chapter in "modern science and technology" were included 45.5% in STS contents, 38.7% in "environment", 29.1% in energy, and 14.0% in "materials". When the STS contents were analyzed by STS topics of Piel, the results are as follows; 38.3% on environmental quality and utilization of natural source, 29.6% on effect of technological developments, 7.9% on energy, and 0.6% on human engineering. However, there were no topics on population, space research and national defense. When the STS contents were analyzed by student activities of SATIS, most of the activities were research and case study. There were few field activities of role play, problem solving and decision making, and research design.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.30 no.2
• /
• pp.119-125
• /
• 2017

Ablative material in a rocket nozzle is exposed to high temperature combustion gas, thus undergoes complicated thermal/chemical change in terms of chemical destruction of surface and thermal decomposition of inner material. Therefore, method for conjugate analysis of thermal response inside carbon/phenolic material including rocket nozzle flow, surface chemical reaction and thermal decomposition is developed in this research. CFD is used to simulate flow field inside nozzle and conduction in the ablative material. A change in material density and a heat absorption caused by the thermal decomposition is considered in solid energy equation. And algebraic equation under boundary layer assumption is used to deduce reaction rate on the surface and resulting destruction of the surface. In order to test the developed method, small rocket nozzle is solved numerically. Although the ablation of nozzle throat is deduced to be higher than the experiment, shape change and temperature distribution inside material is well predicted. Error in temperature with experimental results in rapid heating region is found to be within 100 K.

• Journal of Digital Convergence
• /
• v.12 no.5
• /
• pp.139-148
• /
• 2014

In recent years, computational models using parametric estimation method have been developed and used widely for efficient cost analysis. In this research, by applying experienced data from Guidance and Control Systems in Missile System field, the cost analysis for engineering model and commercial computational model(Price H, HL, M, S) are conducted and its result is analysed, so that the difference between two models and its grounds are apprehended. Comparing the calibrated value of computational model based on the data base of similar equipment and the cost from the engineering estimation, the two results are very close. It means that the credibility of data is enhanced through calibration. Also, for cost analysis of similar components in the future, the method for calibration of the computational models is also examined. When estimating development cost in this research, although many parts have been estimated through uncertain elements, the reliability could have been enhanced by applying computational model which secures objectivity. It is a very reasonable estimation method by utilizing calibration of the computational models based on existing accumulated development data.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.30 no.6
• /
• pp.495-500
• /
• 2017

In the boundary layer of supersonic or hypersonic vehicles, there is the conversion from kinetic energy to thermal energy, called aerodynamic heating. Aerodynamic heating has to be considered to design supersonic vehicles, because it induces severe heat flux to surface. Transient heat transfer analysis with CFD is used to predict thermal response of vehicles, however transient heat transfer analysis needs excessive computing powers. Loosely coupled method is widely used for evaluating thermal response, however it needs to be revised for overestimated heat flux. In this research, quasi-transient method, which is combined loosely coupled method and conjugate heat transfer analysis, is proposed for evaluating thermal response with efficiency and reliability. Defining reference time of splitting flight scenario for transient simulation is important on accuracy of quasi-transient method, however there is no algorithm to determine. Therefore the research suggests the algorithm with various flow conditions to define reference time. Supersonic flow field of blunt body with constant acceleration is calculated to evaluate quasi-transient method. Temperature difference between transient and quasi-transient method is about 11.4%, and calculation time reduces 28 times for using quasi-transient method.