• Journal of the Korea Institute of Military Science and Technology
• /
• v.27 no.1
• /
• pp.8-14
• /
• 2024

In this study, the scale of renewable photovoltaic(PV) panels and hydrogen fuel storage facilities required to achieve "net zero carbon emissions" in military facilities were predicted based on actual electricity consumption. It was set up to expect the appropriate installation size of PV panel and hydrogen fuel storage facility for achieving carbon neutrality, limited to the electricity consumption in the public sector, including national defense and social security administration in Yeongcheon. The experimental results of this paper are largely composed of two parts. First, representative meteorological factors were considered to predict solar power generation in the Yeongcheon area, and solar power generation was estimated through a multiple regression model using deep learning techniques. Second, the size of solar power generation facilities and hydrogen storage facilities in military bases was estimated with the amount of solar power generation and electricity consumption. As a result of this analysis, it was calculated that a site of 155.76×104 m² for PV panels was needed and a facility capable of storing 27,657 kg of hydrogen gas was required. Through these results, it is meaningful to demonstrated the prospect that military units can lead the achievement of "carbon net zero 2050" by using PV panels and hydrogen fuel storage facilities on idle sites of military bases.

• Journal of the Korea Society of Computer and Information
• /
• v.29 no.9
• /
• pp.115-123
• /
• 2024

This paper proposes a method to reduce the delay time caused by control message conflicts in VADAMA (Virtual Allocation Demand Assigned Multiple Access) technology, which is a virtual allocation based on-demand multiple access technology in MF-TDMA (Multi-Frequency Time Division Multiple Access) satellite network. Traditionally, satellite networks have had the problem that all network transmissions have long delay times due to control messages. In this study, in order to improve the delay time caused by terminal control message conflicts in VADAMA technology, the concept of virtual allocation is used to reduce the delay time. VADAMA-PTR (VADAMA Periodic Transmission) divides all terminals into subnets and transmits control. The method is proposed, and the performance analysis of the existing DAMA technology, delay time and data processing rate is performed using Matlab. The results show that the performance is improved.

• Fire Science and Engineering
• /
• v.33 no.6
• /
• pp.35-42
• /
• 2019

The aim of this study is to investigate the direction of improvement of safety experience education through the analysis of the evacuation time experiment. For the study, test subjects were divided into groups of similar body size and weight. The test subjects were directly experienced four evacuation devices, and the experience time was measured. As a result of the analysis of the total time from the installation of the evacuation device to the escape, the time was measured in the order of Descending Life Line-Tilt-Down Rescue Line-Vertical Escape Chute-air safety mat. In the case of evaluating the evacuation time using evacuation mechanisms, the evacuation time was measured in the order of air safety mat-Tilt-Tilt-Down Rescue Line-Descending Life Line-Vertical Escape Chute. In the first and second experiments of the Descending Life Line, time differences were observed. The escape time using the Descending Life Line was reduced in the second experiment than in the first experiment. As shown in this result, education through experience has shown that behavioral confidence and time can be managed. The conclusion of this study is that the goal of safety education is to minimize human life and property damage. Therefore, in order to bring this effect to more people, it is necessary to make efforts to keep self-safe through experiential education.

• Clean Technology
• /
• v.26 no.3
• /
• pp.204-210
• /
• 2020

In this study, the ignition characteristics of bio jet fuel (Bio-7629, Bio-5172) produced by F-T process and petroleum-based jet fuel (Jet A-1) were compared and analyzed. The ignition delay time of each fuel was measured by means of a combustion research unit (CRU) and the results were explained through an analysis of the properties and composition of the fuel. The ignition delay time of Bio-5172 was the shortest while that of Jet A-1 was the longest because Jet A-1 had the highest surface tension and Bio-5172 had the lowest viscosity in terms of fuel properties that could affect the physical ignition delay time. As a result of the analysis of the constituents' type and ratio, 22.8% aromatic compounds in Jet A-1 could generate benzyl radical, which had low reactivity during the oxidation reaction, affecting the increase of ignition delay time. Both Bio-7629 and Bio-5172 were composed of paraffin only, with the ratio of n-/iso- being 0.06 and 0.80, respectively. The lower the degree of branching is in paraffin, the faster the isomerization of peroxy radical is produced during oxidation, which could determine the propagation rate of the ignition. Therefore, Bio-5172, composed of more n-paraffin, possesses shorter ignition delay time compared with Bio-7629.

• Journal of the Korea Society for Simulation
• /
• v.28 no.4
• /
• pp.57-65
• /
• 2019

Recently, the Korean military has been drastically reducing its active-duty troops due to rapid demographic changes and the reconciliatory mode between the two Koreas. Under these circumstances, the wartime reserve forces play an important role. In times of war, a successful personal mobilization is critical especially in early combat stage. Previous research has been carried out using insufficient data collected only within the military and there have been limitations on empirical analysis due to changes in the designation methods for personal mobilization. This study analyzes how much of the reserve forces can be filled at the prescribed time by analyzing the transportation route of the reserve forces in wartime by utilizing military-related data and credit card usage data of the reserve forces residing in Yong-in city. The analysis showed that all reserve forces could not be called up within the prescribed time. In particular, Gangwon Province has shown results of less than 70 percent call-ups, and could cause serious weakening of combat capabilities in the early stages of the war. The main reasons could be the difference between the actual residence and the residence address and the excessive time caused by the traffic congestion.

• Journal of Science Education
• /
• v.39 no.3
• /
• pp.343-357
• /
• 2015

The present study aims to analyze the extent of the use of STS contents in the areas of 'Evolution of Life' and 'Health of Humanity and Scientific Technology' in 'Science' textbooks and to determine whether they meet the goals of the curriculum revised in 2009. The analysis of the 7 types of textbooks according to the STS topics areas indicated big differences between textbooks as little as 16.67% and as much as 58.33%. Also, among the topics associated with STS, 'Space Development and National Defense' and 'Environmental Problems' were not included. In the STS activity areas, the areas of 'Structured Debate,' 'Interpretation of Data,' 'Research and Investigation' showed great frequency. On the other hand, the STS activity areas of 'Field Activities,' 'Problem-solving and Decision-making,' 'Role Playing,' 'Simulation,' 'Case Study,' and 'Research Design' showed small frequency. Analysis of the STS contents for each area indicated 67.57% for the contents relevant to 'the applicability of science' accounting for the largest part whereas 'Understanding of Occupations related to Science' accounted for 1.63%, showing a great difference in their frequency. Seven standards except 'the applicability of science' were included each contents beyond 10% or less than 10% proportion. The STS contents included in the life science area of the 7 types of convergence-style 'Science' textbooks for the high-school accounted for an average of 20.75%, from as little as 12.35% to as much as 26.90%, depending on the publishes.

• Journal of the Korea Institute of Building Construction
• /
• v.15 no.5
• /
• pp.515-525
• /
• 2015

Currently, according to the climate change, serious damage by typhoon has been occurred in the world. In this respect, the research on the prediction model to minimize the damage from various natural disaster has been conducted in several developed countries. In the case of U.S, various models to predict building damage costs have been used widely in many organizations such as insurance companies and governments. In South Korea, although studies regarding damage prediction model according to typhoon have been conducted, the scope has been only limited to consider the property of typhoon. However, it is necessary to consider various factors such as typhoon information, geography, construction environment, and socio-economy factors to predict the damages. Therefore, to address this issue, first, correlation analysis is conducted between various variables based on the data of typhoon from 2003 to 2012. Second, the damage prediction model by using regression analysis is developed based on suggested influence factors. The findings of this study can be utilized to develop the model for predicting the damage costs of buildings by typhoon like HAZUS-MH of US.

• The KIPS Transactions:PartD
• /
• v.15D no.3
• /
• pp.375-386
• /
• 2008

Recently, development paradigm of information system is turning into object oriented and component based, and this methodology is leading the software industry. To acclimatize aptly to this trend, users demand the assessment of software expenses to change with the appropriate model of computing costs of the environment, and some people are actually studying the concept of Object Oriented Function Point and UCP method. Especially, Object Oriented Function Point Measurement Process has good points in overcoming the bound of LOC and the existing the Function Point Measurement Process because Object Oriented Function Point Measurement Process is applicable to the early stage of development project mainly with the used cases, and valid to the life long period as the each stage of software products develops, and always understandable to communicate with users by the UML mark rules. Accordingly, this research is to measure Functional Point at ROFP and AOFP in accordance with the development project of information system by the national defense CBD methodology procedures and UML Interrelation Analysis that are recently and widely used in the developmental environment of object oriented information system. Furthermore, this study suggests the measurement method to obtain Functional Point, and identifies service function and object/class function in the correlation analysis of use case and class based on the products and UML modeling via traditional FPA model and object oriented FPA model. Above all, this study is to demonstrate the improvement of traditional Function Point Measurement Process, IFPUG-CPM and software cost basis, and reveal Function Point Measurement Process, which is appropriate to the development of object oriented information system, and suggest the evaluation results of the compatibility through case studies.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.46 no.2
• /
• pp.150-158
• /
• 2018

Numerical simulation and experimental study on the thermal flow field of the micro turbojet engine have been carried out for the purpose of developing infrared reduction technology for aircraft. A circular basic nozzle and five rectangular nozzles with different aspect ratio were considered. The conditions for CFD analysis were derived from the analysis of the engine performance. The temperature distribution of the nozzle plume was measured using a temperature sensing system. The thrust of the rectangular nozzle with the aspect ratio 5 was reduced about 1.8% compared to the circular nozzle, and the thrust decreased with increasing the aspect ratio of the nozzle. In the case of thermal flow field, it was observed that, as the aspect ratio increases, the exhaust plume in the experiment was formed wider than in the CFD analysis.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.42 no.8
• /
• pp.640-647
• /
• 2014

Infrared signature of aircraft exhaust plume is the critical factor for aircraft survivability. To improve the military aircraft survivability, the accurate prediction of infrared signature for the propulsion system is needed. The numerical analysis of thermal fluid field for nozzle inflow, free stream flow, and plume region is conducted by using the in-house code. Weighted Sum of Gray Gases Model based on Narrow Band with regrouping is adopted to calculate the spectral infrared signature emitted from aircraft exhaust plume. The accuracy and reliability of the developed code are validated in the one-dimensional band model. It is found that the infrared radiant intensity is relatively more strong in the plume through the analysis, the results show the different characteristic of the spectral infrared signature along the temperature, the partial pressure, and the species distribution. The continuous spectral radiant intensity is shown near the nozzle exit due to the emission from the nozzle wall.