• Journal of Korean Society for Quality Management
• /
• v.45 no.3
• /
• pp.309-326
• /
• 2017

Purpose: The purpose of this study is to propose useful idea and data by association analyzing MRA results of defense research and development. Methods: The collected data through the DTaQ MRA system are analyzed using three association analysis measurements. Results: The results of this study are as follows; some evaluation items are very highly associated according to confidence and lift. The result is also meaningful as contents of evaluation items. The result of this study suggests a direction for improvement of MRA system. Conclusion: Some evaluation items of MRA are meaningfully associated. Therefore, the result can support the improvement of MRA system.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.6
• /
• pp.74-79
• /
• 2019

The military vehicle produces electric power through an engine-integrated serial hybrid generator that is connected to the engine and does not have a separate generator installation space. However, depending on the mechanical characteristics of the connection between the generator and the engine, iron oxide for internal rusting and lubrication grew scattered. The iron oxide is adhered to the starter to deteriorate the starting performance, and there is a problem that the noise of the leg due to wear of the gear is increased. To solve this problem, the connection spline material and the surface treatment of the engine were improved and the shape was changed to a grease sealing type to prevent the generation of iron oxide inside. As the shape of the generator connector composing the shafting system was changed, the integrity of the structure was confirmed through the torsional endurance test. In addition, through the actual vehicle load test, it was verified that no corrosion occurred during the target life span without internal corrosion. It was confirmed that the anti-scattering structure of the grease effectively suppresses the generation of iron oxide, thereby reducing the noise generated from the generator. In this paper, we propose a fundamental solution to the degradation of the starter and the noise generation by preventing the back corrosion caused by the serial hybrid generator installed between the engine and the transmission.

• Journal of Korean Society for Quality Management
• /
• v.43 no.3
• /
• pp.273-288
• /
• 2015

Purpose: In this study, we apply environmental stress screening (ESS) to battle management system (BMS) of a tank and use the ESS profile based on production process data, guided by MIL-HDBK-781/344/2164. Methods: To optimize ESS Profile of the BMS of a tank, we estimate ESS model parameters (e.g., defect density, screening strength) using primary production failure reporting and corrective action system (FRACAS) data of military supply contract firm. Results: First, we collect the Primary production FRACAS data of military supply contract firm. Second, we compute curve fitting approach to find patent defect density and latent defect density using FRACAS data. Third, we solve the equation of Defect Density(patent defect density + latent defect density)($D_{IN}$) and Screening Strength(SS) Using second step data. As a result of analysis according to the order, we calculate $D_{IN}$(Temperature stress case : 74.02, Vibration stress : 10.252) and : SS(Temperature stress case : 0.4632, Vibration stress : 0.4142) and confirm the Condition II-D based on MIL-HDBK-344. According to Condition II-D, it is necessary to modify existing ESS profile through decreasing the $D_{IN}$ and increasing the SS. Conclusion: Identification of defect causes through ESS approach reduce defect densities for production. It provides feedback to a lessons-learned data base to avoid similar problems on next generation tank BMS.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.5
• /
• pp.508-515
• /
• 2020

This study examined the research trends of "Microplastic in food" with a scholar databaseusing the centrality analysis method. The data was based on research papers published from 2011 to 2020, sorted by "microplastic" and "food". The centrality analysis methodology(Degree centrality, Closeness centrality, Betweenness centrality) was applied, followed by a keyword-based frequency occurrence analysis. The results suggested that more than 30% of the total keywords were related to "marine" and "pollution". Therefore, research on the effects of microplastic pollution on the ecosystem had mainly been conducted. On the other hand, only 6% of the keywords were related to "toxicity" and "ingestion". Hence,the number of studies on microplastic exposure caused by bioaccumulation or food are still insufficient. These results can be used to provide directions for future research, as well as provide basic data for political decision-making on the environmental hazards of microplastic.

• Journal of Korean Society for Quality Management
• /
• v.42 no.3
• /
• pp.279-290
• /
• 2014

Purpose: The purpose of this study is to propose adoption of QFD and Stage-gate in order to analyze the quality of korea defense system. Methods: Drawing change data of initial production phase in korea defense system were anlayzed and a practical method was proposed. Results: The results of this study are as follows; Off line Quality Control should be introduced in development phase. Specially, in case of defense system, the best method is QFD(Quality Function Deployment) and Stage-gate process. At first, QFD 1 step defines product planning from VOC(Voice Of Customer), QFD 2 step specifies part planning from product planning, QFD 3 step defines process planning from part planning, QFD 4 step defines production planning from previous process planning. Secondly, Stage-gate process is adopted. This study is proposed 5 stage-gate in case of korea defense development. Gate 1 is located after SFR(System Function Review), Gate 2 is located after PDR(Preliminary Design Review), Gate 3 is located after CDR(Critical Design Review), Gate 4 is located after TRR(Test Readiness Review) and Gate 5 is located before specification documentation submission. Conclusion: Off line QC(Quality Control) in development phase is necessary prior to on line QC(Quality Control) in p roduction phase. For the purpose of off line quality control, QFD(Quality Function Deployment) and Stage-gate process can be adopted.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.8
• /
• pp.251-261
• /
• 2016

Recently, many weapon related quality issues have arisen in the armed forces, such as failures of K-21 Infantry Fighting Vehicles, K-9 self-propelled mounts, and grenade explosion during boot training. Since all of the issues are repetitive phenomena, we examined the defense quality management system and identified the possible solutions for it. Since the government quality assurance agency performs their quality assurance activity using the system evaluation technique, we first reviewed the regulations related to the defense quality management system. Then, we benchmarked some other advanced quality management systems. We suggested two types of defense quality management system, one for small (in terms of the amount of the contract) competitive contracts and the other for large private contracts. For the first one, we adopted the framework of MIL-I-45208 (Inspection System Requirement), while for the second one, we adopted the framework of NATO AQAP 2310 (Quality Management System Requirements for Aviation, Space and Defense Suppliers).

• The Journal of the Korea Contents Association
• /
• v.12 no.8
• /
• pp.420-428
• /
• 2012

To improve the efficiency of business, it is important to standardize the meaning of terminology. And then, terminology dictionaries have been actively being built and used in various fields. In defense area, the publication of defense terminology dictionary is useful for information exchange of each army and distribution of standardized terminology. Defense agency for technology and quality(DTaQ) publishes terminology dictionary of defense science and technology on a three-year cycle. DTaQ tries to standardize the construction process of terminology dictionary and improve service efficiency by using terminology dictionary in defense area. This proposed method is based on the result of previous study about standardization of terminology dictionary. We suggest the practical steps including terminology dictionary constructing process, composition and role of organization, definition of headword, selection of target documents to be extracted terminology candidate, terminology extraction, generation of terminology candidate group, workbench registration, construction and validation of terminology dictionary. Thesaurus and workbench are developed to use and support terminology dictionary effectively.

• Journal of Korean Society for Quality Management
• /
• v.46 no.3
• /
• pp.379-396
• /
• 2018

Purpose: The purpose of this study was to propose a standard form of noise filter drawing, which is widely used in the field of weapon systems, to define the essential specification which is not standardized at the existing drawings and to employ the reference for manufacturing and qualification test. Methods: To do that, it identifies the improvements to analyze 19 noise filter drawings, studies the principle of noise filtering to find the essential part of the spec. and reviews the MIL-STD-220C and KS IEC 60939, which is the widely used as a formal spec. pertaining to the noise filter. Throughout the study, a standard form is developed to standardize the attenuation characteristics and find eight crucial metrics to specify the noise filter. Results: The results of this study are as follows; The standardized drawings can be used as the qualification test of the item and the manufacturing and engineering documents to make the noise filter, which are also applicable to the reference document to review KDS(Korea Defense Standard) drawings.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.6
• /
• pp.689-695
• /
• 2018

This paper presents the means of controlling the regeneration of a diesel particulate filter (DPF) that is mounted on tactical vehicles to satisfy exhaust gas standards. The DPF captures particulate matter in the exhaust gas and combusts the captured particulate matter. This process is regeneration, which is essential to the normal performance of the DPF. Bad regeneration causes degradation of vehicle performance; worse, it can lead to a vehicle fire. DPF regeneration is performed by control logic. If the regeneration control logic does not properly reflect the operating characteristics of the vehicle, DPF regeneration may not occur. Consequently, it is very important to ensure the DPF operates properly by reflecting the operating characteristics of the tactical vehicle. This study analyzes the operational characteristics of a tactical vehicle and the DPF, and adds proper DPF regeneration control logic. Additionally, this study is intended to simultaneously improve the additional problems that may occur from operating under the added regeneration control logic.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.4
• /
• pp.446-458
• /
• 2017

In order to make a decision about the acquisition of command control communication weapon systems considering the client's technology level requirements, the improvement of the domestic technology level and security of core technology, the person in charge can perform technology evaluation/analysis based on command control communication weapon system patent data. As a method of collecting such patent data, we can collect the patent data of government-designated (Defense Acquisition Program Act Article 35) companies (11 Major defense companies/9 General defense companies) through the Korea Intellectual Property Rights Information System (KIPRIS) of the Korean Intellectual Property Office (KIPO) In this way, we collected 1,526 patents and 134 International Patent Classification (IPC) types through the KIPRIS of the KIPO. Based on these data, we performed three types of analysis, General information analysis, Principal Components Analysis (PCA) and Network analysis, and extracted 27, 19 and 13 IPC types from them, respectively. Based on the above three analysis results, we confirmed 8 IPC types (F41A, F41G, G06F, G01S, H04B, H04L, H04M and H04W) as the key technologies and representative technology fields of domestic communication-electronics defense companies.