• 대한치과보철학회지
• /
• 제47권2호
• /
• pp.99-107
• /
• 2009

연구목적: 악구강계의 건강을 심미적, 기능적으로 유지 및 증진시키는 것을 목적으로 치아의 형태 이상이나 결손 등을 갖고 있는 환자들에게 고정성 보철 술식이 보편적으로 시술되어 오고 있다. 환자 스스로의 관리 부족과 더불어 부적절한 기공 과정으로 인해 보철물과 연관된 합병증이 발생할 수 있다. 이를 해결하고자 고정성 보철물의 장기간의 임상 상태 조사에 많은 노력을 기울여 왔으나 자료 수집에 어려움이 많았다. 이에 본 연구에서는 고정성 보철물의 임상적 상태를 조사하여 보철물의 치료 계획과 생존율을 높이는 guideline에 기여하고자 하였다. 연구 재료 및 방법: 2007년 4월에서 9월까지 6개월간 부산대학교병원 치과 보철과에 내원한 초진 환자 중 고정성 보철물을 장착하여 사용 중인 환자를 대상으로 보철물과 관련한 종합적인 상태를 조사하였다. 결과 및 결론: 1. 전체 고정성 보철물의 추정 수명은 10.0년이었고, 평균 장착 기간은 $8.6{\pm}0.6$년이었다. 2. 부위별 추정 수명은 차이가 없었으나(P>.05), 성공률은 하악과 구치부 보철물에서 높았고(P<.05), 전치-구치 혼합형 보철물에서는 실패율이 높았다(P<.05). 3. 재료별 추정 수명은 금속관이 14.0년으로 가장 길었고, 금합금관(10.0년), 귀금속 도재관(10.0년), 비귀금속 도재관(8.0년) 순이었다(P<.05). 그러나 금속관은 실패율이 높았고, 성공률은 금합금관과 귀금속 도재관에서 높았다. 4. 크기별 추정 수명은 차이를 보이지 않았으나(P>.05), 성공률은 단일관에서 높았고(P<.05), 실패율은 3-유닛 이상에서 높았다(P<.05). 5. 대합치 조건별 추정 수명은 차이가 없었으나(P>.05), 고정성 및 가철성 국소 의치가 대합치인 경우 실패율이 높았고, 자연치일 경우 성공률이 높았다(P<.05). 6. 고정성 보철물의 합병증은 치아 우식증(23.0%), 치주 질환(19.3%), 치수 질환(16.9%) 순이었고, 기계적 문제점은 변연 결함(28.2%), 보철물 파절(6.7%), 유지력 상실(4.8%) 순이었다. 보철물을 제거한 후 잔존 치질은 고정성 보철물의 합병증으로 인하여 30.1%가 수복 불가능한 상태였다.

• 한국수정란이식학회지
• /
• 제30권4호
• /
• pp.289-298
• /
• 2015

Edaravone (Eda) is a potent scavenger of inhibiting free radicals including hydroxyl radicals ($H_2O_2$). Reactive oxygen species (ROS) such as $H_2O_2$ can alter most kinds of cellular molecules such as lipids, proteins and nucleic acids, cellular apoptosis. In addition, oxidative stress from over-production of ROS is involved in the defective embryo development of porcine. Previous study reported that Eda has protective effects against oxidative stress-like cellular damage. However, the effect of Eda on the preimplantation porcine embryos development under oxidative stress is unclear. Therefore, in this study, the effects of Eda on blastocyst development, expression levels of ROS, and apoptotic index were first investigated in preimplantation porcine embryos. After in vitro fertilization, porcine embryos were cultured for 6 days in PZM medium with Eda ($10{\mu}M$), $H_2O_2$ ($200{\mu}M$), and Eda+$H_2O_2$ treated group, respectively. Rate of blastocyst development was significantly increased (P<0.05) in the Eda treated group compared with only $H_2O_2$ treated group. And, we measured intracellular levels of ROS by DCF-DA staining methods and investigated numbers of apoptotic nuclei by TUNEL assay analysis is in porcine blastocyst, respectively. Both intracellular ROS levels and the numbers of apoptotic nucleic were significantly decreased (P<0.05) in porcine blastocysts cultured with Eda ($10{\mu}M$). More over, the total cell number of blastocysts were significantly increased (P<0.05) in the Eda-treated group compared with untreated group and the only $H_2O_2$ treated group. Based on the results, Eda was related to regulate as antioxidant-like function according to the reducing ROS levels during preimplantation periods. Also, Eda is beneficial for developmental competence and preimplantation quality of porcine embryos. Therefore, we concluded that Eda has protective effect to ROS derived apoptotic stress in preimplantation porcine embryos.

• CRM연구
• /
• 제1권1호
• /
• pp.23-48
• /
• 2006

본 연구는 우리나라 전자상거래 업계에서 새로운 업태로 급격하게 성장하고 있는 인터넷 오픈마켓기업이 고객의 신뢰도 확보를 위하여 갖추어야 할 전략적 요소는 무엇인지 파악하고자 실시되었다. 소비자들이 오픈마켓의 명성과 평판을 보고 거래에 참가하지만, 실제 거래는 인지도나 만족도가 낮은 중소규모의 판매자 또는 일부 프로 슈머와 거래해야 된다는 점에서 판매자의 신뢰확보 여부가 오픈마켓 성패의 중요한 요소가 될 것이다. 연구결과, 오픈마켓에 참가하는 소비자가 구매과정에서 경험한 만족도는 7점 척도기준 4.23으로 비교적 낮은 수준이었으며, 거래의 안전성 확보를 위하여 중요하게 인식하는 요인은 (1) 사후적 피해보상의 가능성 (2) 상품품 질 및 브랜드의 진정성 (3) 상품의 신속 정확한 배송 (4) 상품가격 및 품질 등 선택정보 제공 등으로 나타났다. 이러한 요인들과 판매자의 신뢰도와의 관계를 회귀분석한 결과 양자의 관계는 매우 유의한 것으로 나타나 이러한 요인들이 충족될 경우 판매자에 대한 소비자의 신뢰도가 향상될 것으로 나타났다. 따라서 오픈마켓 기업은 소비자 신뢰확보를 위하여 판매자에 대한 소비자의 신뢰 확보를 위하여 지속적인 관계마케팅, 고객관계 관리 전략이 필요한 것으로 판단된다.

• 한국화재소방학회논문지
• /
• 제13권4호
• /
• pp.38-55
• /
• 1999

열적특성이 비교적 열악한 재료인 유리를 내화성능이 요구되는 방화구획을 이루는 비내력벽에 사용하려는 시포가 국내외적으로 활발하게 진행되고 있는 중에서, 본 연구는 유리표면에 수막을 형성시켜 구획화재시 유리벽이 파열되지 않고 견딜 수 있는 성능을 가질 수 있는 초점을 맞추어 단계적인 실험을 실시하였다. 먼저 수직고가 3M이상인 유리벽에 균일하고도 단절이 없는 수막을 형성할 수 있는 시스템을 고안하여 대형내화로내에서 화염의 세기를 줄이지 않는, 즉 리바운드량이 거의 없는 수막을 형성시킬 수 있도록 제작한 후, 이 시스템을 사용하여 수막이 형성된 유리벽의 열적 특성을 확인하는데 중점을 두고 실험하였다. 다음에는 고안된 시스템을 소형과 대형의 유리벽에 적용시켜 우선적으로는 소형내화로에서 가열하여 기초적인 열적 특성을 조사한 후에 여기서 얻은 데이터를 근거로 실제규모의 실험이 가능한가를 판단한 후에 최종적으로는 2.4M$\times$3M크기의 대형의 유리벽에 수막을 형성한 플러드 노즐형 수막형성유리벽체를 대형내화로내에 거치하여 KS F2257에 의하여 가열하는 내화성능실험을 수행하였다. 실험결과 수막이 왼벽하게 유리면을 도포된 상태에서만 유리가 파열되지 않았으며 이런 수막을 계속적으로 유지하는 데는 많은 변수가 있다는 것을 발견하였으며 또한 수막도포상태의 변화는 내화성능을 보유하는데 있어서 핵심적으로 작용한다는 것을 확인할 수 있었다.

• 농약과학회지
• /
• 제20권1호
• /
• pp.41-46
• /
• 2016

Acidovorax avenae subsp. citrulli에 의해 발생하는 수박 과일썩음병은 수박재배지역에 문제병해이다. 수박 과일썩음병 방제를 위해 시판되는 살세균제로 방제효과 조사하였다. 고체배지를 이용한 생장억제효과를 검정한 결과, 옥솔린산 수화제, 옥시테트라사이클린 수화제 등에서 과일썩음병균 생장억제효과가 나타났다. 총 4종의 살세균제를 사용하여 종자침지, 유묘기에 발생한 수박 과일썩음병 방제효과를 검정한 결과, 종자침지에서는 옥시테트라사이클린 수화제가 90% 이상의 방제효과를 보였고, 유묘기에 발생한 수박 과일썩음병 방제에는 아시벤졸라-에스-메틸+만코제브 수화제가 90% 이상의 방제효과를 보였다. 온탕침지 처리법으로도 병든 수박종자에 발생하는 수박 과일썩음병 감염율을 효과적으로 낮출 수 있는데, 그 처리조건은 $50{\sim}55^{\circ}C$에서 20~30분간 처리하는 것이다. 이러한 결과들은 수박재배농가와 육묘재배인이 사용 가능한 방법으로 수박 과일썩음병의 효율적인 방제법이 확립되는데 도움이 될 것으로 판단된다.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제32권4호
• /
• pp.306-312
• /
• 2010

Purpose: The purpose of this experiment was to evaluate the clinical effect of cultured autoglogous osteoblasts as a way to treat the defect of mandible in rabbits. Materials and Methods: Twelve rabbits were used to determine the rate of osteogenesis. The osteoblasts were obtained from the iliac crest of rabbits using aspiration. They were then cultured in Dulbecco's Modified Eagles's Medium (DMEM) with beta-glycerophosophatate, L-ascorbicacid, and dexamethasone to proliferate and differentiate osteoprogenitor cells. The expression of osteogenic markers were detected by reverse transcription-polymerase chain reaction (RT-PCR) and silver nitrate staining techniques. Five, 10-mm holes were placed in each rabbit mandible to simulate defective regions with the use of a low speed trephine bur. In the experimental group, the previously cited defects were grafted with both activated osteoblastic and autogenous bone. The control group, however, was only grafted with autogenous bone. Both groups were then analyzed at 2, 4, and 8-week intervals using bone histomorphometric analysis. Results: According to histomorphologic analysis, the rates of new bone formation at the 2, 4, and 8-week intervals were 36%, 51%, and 23% for the control group, respectively; 52%, 39%, and 28%, for the experimental group, respectively. The experimental group showed higher rates of new bone formation compared to the control group at both the 2-week and 8-week interval. Conclusion: Bone marrow-derived osteoblasts seems to be a promising bone graft material.

• 무역상무연구
• /
• 제77권
• /
• pp.239-258
• /
• 2018

The purpose of this study is to examine the legal standards of agreements on the origin of liability and the relevant laws in Korea, to suggest implications for custom authorities and traders wishing to benefit from preferential tariff via FTA, citing the excluded cases of related FTA preferences (court cases and administrative judgments). In order to examine the provisions related to supporting evidence of the origin of liability in FTA, we examined FTAs agreed between Korea and EU, EFTA, ASEAN, U.S., and India relevant to FTA Special Customs Act, court cases and administrative judgements. If verifying the origin to protect the fair trade order impedes to promote utilizing FTA, solutions will need to be suggested. If FTA preference is exempted due to verifying the origin by the import customs authorities, the importer shall pay the income tax calculated in accordance with the general tax rate. This is because the certificate of origin confirmed during verification process is different from the actual origin. In most agreements, the exporter (the producer) shall issue the certificate of origin and since the importer has no other option than obtaining the certificate of origin from the exporter, it may face consequences such as declined credibility from the custom authorities in addition to being disqualified for FTA preferential, if the certificate of origin received from the exporter has flaws. On the other hand, the exporter cannot help but being punished by the customs authorities due to issuing defective origin certificates, but it doesn't have conventionary liabilities for damages incurred to the importer. As a result, importers are forced to pursue legal proceedings to claim damages to exporters or to give up FTA preference. As FTA is increasingly utilized, the number and amount of origin verification in Korea has continuously been increasing while administrative judgements indicates other FTA exporters doesn't seem to gain any support in utilizing FTA like Korea does. It has been 8 years since full-scale supports in FTA launched and now is the time to introduce more efficient and intensive FTA support system In this regard, it is desirable to conduct comprehensive verification on export Next, an institutions that assures FTA-based exports should be established in order to compensate the importer's damages that may occur from disqualified certificate of origin issued by the exporter.

• 한국정밀공학회지
• /
• 제3권1호
• /
• pp.40-49
• /
• 1986

Crack, craze and void are common defects which may be found in the bulk of polymeric materials such as either themoplastics or thermosets. The healing phenomena, autohesion, of these defects are known to be a intrinsic material property of various polymeric materials. However, only a few experimental and theoretical investigations on crack, void and craze healing phenomena for various polymeric materials have been reported up to date [1, 2, 3]. This may be partly due to the complications of healing processes and lacking of appropriate theoretical developments. Recently, some investigators have been urged to study the healing phenomena of various polymenic materials since the significance of the use of polymer based alloys or composites has been raised in terms of specific strength and energy saving. In the earlier published reports [1, 2, 3, 4], the crack and void healing velocity, healing toughness and some other healing mechanical and physical properties were measured experimentally and compared with predicted values by utilizing a simple model such as the reptation model under some resonable assumptions. It seems, however, that the general acceptance of the proposed modeling analyses is yet open question. The crack healing processes seem to be complicate and highly dependent on the state of virgin material in terms of mechanical and physical properties. Furthermore, it is also strongly dependent on the histories of crack, craze and void development including fracture suface morphology, the shape of void and the degree of disentanglement of fibril in the craze. The rate of crack healing may be a function of environmental factors such as healing temperature, time and pressure which gives different contact configurations between two separated surfaces. It seems to be reasonable to assume that the crack healing processes may be divided in several distinguished steps like stress relaxation with molecular chain arrangement, surface contact (wetting), inter- diffusion process and com;oete healing (to obtain the original strength). In this context, it is likely that we no longer have to accept the limitation of cumulative damage theories and fatigue life if it is probable to remove the defects such as crack, craze and void and to restore the original strength of polymers or polymer based compowites by suitable choice of healing histories and methods. In this paper, we wish to present a very simple and intuitive theoretical model for the prediction of healed fracture toughness of cracked or defective polymeric components. The central idea of this investigation, thus, may be the modeling of behavior of chain molecules under healing conditions including the effects of chain scission on the healing processes. The validity of this proposed model will be studied by making comparisons between theoretically predicted values and experimentally determined results in near future and will be reported elsewhere.

• Journal of Chest Surgery
• /
• 제12권3호
• /
• pp.281-288
• /
• 1979

For years, physicians and anatomists have been interested in the heart that has one functioning ventricle. Various terms have been suggested for this entity including single ventricle, common ventricle, double-inlet left ventricle, cor biatriatum triloculare, and primitive ventricle. In this report, the term "single ventricle" is utilized as suggested by Van Praagh, and is defined as that congenital cardiac anomaly in which a common or separate atrioventricular valves open into a ventricular chamber from which both great arterial trunks emerge. An outlet chamber, or infundibulum, may or may not be present and give rise to the origin of either of the great arteries. This definition excludes the entity of mitral and tricuspid atresia. An 11 year old cyanotic boy was admitted chief complaints of exertional dyspnea and frequent upper respiratory infection since 2 weeks after birth. He was diagnosed as inoperable cyanotic congenital heart disease, and remained without any corrective treatment up to his age of 11 year when he suffered from aggravation of symptoms and signs of congestive heart failure for 2 months before this admission. On 22nd of May 1979, he was admitted for total corrective operation under the impression of tricuspid atresia suggested by a pediatrician. Physical check revealed deep cyanosis with finger and toe clubbing, and grade V systolic ejection murmur with single second heart sound was audible at the left 3rd intercostal space. Development was moderate in height [135 cm] and weight[28Kg]. Routine lab findings were normal except increased hemoglobin [21.1gm%], hematocrit [64 %], and left axis deviation with left ventricular hypertrophy on EKG. Cardiac catheterization and angiography revealed 1-transposition of aorta, pulmonic valvular stenosis, double inlet of a single ventricle with d-loop, and normal atriovisceral relationship [Type III C solitus according to the classification of Van Praagh]. At operation, longitudinal incision at the outflow tract of right ventricle in between the right coronary artery and its branch [LAD from RCA] revealed high far anterior aortic valve which had fibrous continuity with mitral annulus, and pulmonic valve was stenotic up to 4 mm in diameter positioned posterolaterally to the aorta. Ventricular septum was totally defective, and one markedly hypertrophied moderator band originated from crista supraventricularis was connected down to the imaginary septum of the ventricular cavity as a pseudoseptum of the ventricle. Size of the defect was 3X3 cm2 in total. Patch closure of the defect with a Teflon felt of 3.5 x 4 cm2 was done with interrupted multiple sutures after cut off of the moderator band, which was resutured to the artificial septum after reconstruction of the ventricular septum. Pulmonic valvotomy was done from 4 mm to 11 mm in diameter thru another pulmonary arteriotomy incision, and right ventriculotomy wound was closed reconstructing the right ventricular outflow tract with pericardial autograft of 3 x 4 cm2. Atrial septal defect of 2 cm in diameter was closed with 3-0 Erdeck suture, and atrial wall was sutured also when rectal temperature reached from 24`C to 35.5`C. Complete A-V block was managed with temporary external pacemaker with a pacing rate of 110/min. thru myocardial wire, and arterial blood pressure of 80/50 mmHg was maintained with Isuprel or Dopamine dripping under the CVP of 25-cm saline. Consciousness was recovered one hour after the operation when his blood pressure reached 100 /70 mmHg, but vital signs were not stable, and bleeding from the pericardial drainage and complete anuria were persisted until his heart could not capture the pacemaker impulse, and patient died of low output syndrome 320 min after the operation.

• Journal of Chest Surgery
• /
• 제12권3호
• /
• pp.289-296
• /
• 1979

For years, physicians and anatomists have been interested in the heart that has one functioning ventricle. Various terms have been suggested for this entity including single ventricle, common ventricle, double-inlet left ventricle, cor biatriatum triloculare, and primitive ventricle. In this report, the term "single ventricle" is utilized as suggested by Van Praagh, and is defined as that congenital cardiac anomaly in which a common or separate atrioventricular valves open into a ventricular chamber from which both great arterial trunks emerge. An outlet chamber, or infundibulum, may or may not be present and give rise to the origin of either of the great arteries. This definition excludes the entity of mitral and tricuspid atresia. An 11 year old cyanotic boy was admitted chief complaints of exertional dyspnea and frequent upper respiratory infection since 2 weeks after birth. He was diagnosed as inoperable cyanotic congenital heart disease, and remained without any corrective treatment up to his age of 11 year when he suffered from aggravation of symptoms and signs of congestive heart failure for 2 months before this admission. On 22nd of May 1979, he was admitted for total corrective operation under the impression of tricuspid atresia suggested by a pediatrician. Physical check revealed deep cyanosis with finger and toe clubbing, and grade V systolic ejection murmur with single second heart sound was audible at the left 3rd intercostal space. Development was moderate in height [135 cm] and weight[28Kg]. Routine lab findings were normal except increased hemoglobin [21.1gm%], hematocrit [64 %], and left axis deviation with left ventricular hypertrophy on EKG. Cardiac catheterization and angiography revealed 1-transposition of aorta, pulmonic valvular stenosis, double inlet of a single ventricle with d-loop, and normal atriovisceral relationship [Type III C solitus according to the classification of Van Praagh]. At operation, longitudinal incision at the outflow tract of right ventricle in between the right coronary artery and its branch [LAD from RCA] revealed high far anterior aortic valve which had fibrous continuity with mitral annulus, and pulmonic valve was stenotic up to 4 mm in diameter positioned posterolaterally to the aorta. Ventricular septum was totally defective, and one markedly hypertrophied moderator band originated from crista supraventricularis was connected down to the imaginary septum of the ventricular cavity as a pseudoseptum of the ventricle. Size of the defect was 3X3 cm2 in total. Patch closure of the defect with a Teflon felt of 3.5 x 4 cm2 was done with interrupted multiple sutures after cut off of the moderator band, which was resutured to the artificial septum after reconstruction of the ventricular septum. Pulmonic valvotomy was done from 4 mm to 11 mm in diameter thru another pulmonary arteriotomy incision, and right ventriculotomy wound was closed reconstructing the right ventricular outflow tract with pericardial autograft of 3 x 4 cm2. Atrial septal defect of 2 cm in diameter was closed with 3-0 Erdeck suture, and atrial wall was sutured also when rectal temperature reached from 24`C to 35.5`C. Complete A-V block was managed with temporary external pacemaker with a pacing rate of 110/min. thru myocardial wire, and arterial blood pressure of 80/50 mmHg was maintained with Isuprel or Dopamine dripping under the CVP of 25-cm saline. Consciousness was recovered one hour after the operation when his blood pressure reached 100 /70 mmHg, but vital signs were not stable, and bleeding from the pericardial drainage and complete anuria were persisted until his heart could not capture the pacemaker impulse, and patient died of low output syndrome 320 min after the operation.