• Structural Engineering and Mechanics
• /
• 제60권4호
• /
• pp.667-691
• /
• 2016

This study focuses on the damage detection of defect types in plate structures based on wavelet transform (WT) and curvelet transform (CT). In particular, for damage detection of structures these transforms have been developed since the last few years. In recent years, the CT approach has been also introduced in an attempt to overcome inherent limitations of traditional multi-scale representations such as wavelets. In this study, the performance of CT is compared with WT in order to demonstrate the capability of WT and CT in detection of defect types in plate structures. To achieve this purpose, the damage detection of defect types through defect shape in rectangular plate is investigated. By using the first mode shape of plate structure and the distribution of the coefficients of the transforms, the damage existence, the defect location and the approximate shape of defect are detected. Moreover, the accuracy and performance generality of the transforms are verified through using experimental modal data of a plate.

• 한국세라믹학회지
• /
• 제36권12호
• /
• pp.1335-1341
• /
• 1999

The electrical conductivity ($\sigma$) of TiO2 doped with 0.05-4.0mol% Nb2O5 was measured in the oxygen partial pressure range of 10-17 to 100 atm and temperature range of 1100 to 130$0^{\circ}C$ to investigate the electrical properties and defect types. The oxygen partial pressure dependence of the electrical conductivity (log$\sigma$/logPo2) above 110$0^{\circ}C$ was divided into the four regions. From these experimental results the following defect regions were proposed ; 1) Magneli phase(extended defect) 2) reduced rutile region where intrinsic defect predominates 3) nearly stoichiometric region which is independent on the oxygen partical pressure and 4) overstoichiometric region which is not observed in pure TiO2 The electrical conductivity of Nb-doped TiO2 depended on the doping content the oxygen partial pressure and the measuring tem-perature.

• 한국건설관리학회논문집
• /
• 제19권4호
• /
• pp.34-42
• /
• 2018

공동주택은 국민 대다수가 선호하는 대표적인 주거양식으로 자리매김한 반면, 완공된 공동주택의 기초 골조 설비 마감 및 조경 등의 수많은 구조체와 마감재에서 균열 침하 파손 누수 결로 및 탈락 등의 다양한 결함이 발생하여 하자없는 신축 공동주택을 원하는 입주자와 하자가 발생하는 것은 불가피하다고 주장하는 사업주체간에 분쟁이 지속적으로 발생하고 있다. 이러한 하자분쟁은 입주자와 건설업체 모두에게 경제적 손실을 발생시킨다. 이러한 관점에서 본 논문에서는 하자분쟁사례를 활용하여 공종별 각 보증기간의 하자보수 빈도 및 비용을 분석하고, 이를 종합하여 공종별 각 보증기간의 하자보수위험을 평가하여 하자보수보증금 산정에 대한 시사점을 도출하는 것을 목적으로 한다. 이를 위해 본 논문에서는 준공 이후 10년 이상된 공동주택 하자분쟁사례 32건, 5337개의 하자아이템을 활용하여 공종별 각 보증기간의 하자보수위험을 평가하였다. 하자빈도와 하자비용을 종합하여 공종별 하자보수보증기간의 하자비용을 분석한 결과, 철근콘크리트공사와 마감공사의 하자위험이 매우 높은 것으로 파악되었다. 이는 결국 하자보수보증금이 일률적으로 연차별로 배분되어 있는 것에 문제점이 있음을 나타낸다. 또한 하자보수보증금의 경과년수에 따른 반환비율과 경과년수에 따른 하자위험을 비교한 결과, 기존 반환비율에 대한 조정이 필요할 것으로 나타났다.

• 한국건축시공학회지
• /
• 제15권5호
• /
• pp.491-500
• /
• 2015

본 연구에서는 공동주택에서 건설 공사비 증가의 원인이 되는 하자에 대하여 건설업체의 공급자 중심이 아닌, 소비자가 법적인 하자보수 책임기간 만기를 앞두고 안전진단 전문기관에 의뢰하여 얻은 하자진단 결과보고서 자료를 근거로 공종별 하자실태를 조사하였다. 또한, 보수비용적 측면에서 세부요인을 분석하여, 시공단계에서의 품질향상과 하자분쟁 해결의 객관적이며 기초적인 자료를 제시하였다.

• 한국안전학회지
• /
• 제21권6호
• /
• pp.64-73
• /
• 2006

Due to the lack of available land for housing in Korea, apartment has been supplied in great quantities to raise the rate for land-use since the middle of 1980s. Many people in Korea live in apartment because the number of apartment occupies more than half of total houses. Nevertheless, the concern on the house management with respect to the quality is insufficient, it is currently required the concern on the quality of housing. Moreover, many defects in apartment has been occurred repeatedly now, so, it is necessary to analyze the defect in order to raise the quality of living environment. This study aimed to survey the types of defect in apartment according to the construction types through the questionnaire analysis about apartment residents in Gwangju city for the purpose of reducing the defects.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2004년도 추계학술대회 논문집
• /
• pp.585-589
• /
• 2004

This paper deals with the algorithm development that inspects defects such as Lens Focus, Black Defect, Dim Defect, Color Defect, White Balance, and Line Defect caused by the process of Compact Camera Module (CCM). These days the demand of CCM goes on increasing in various types like PDA, a cellular phone and PC camera every year. However, owing to the defect inspection of CCM by the semiskilled work the average inspection time of CCM takes about 40 to 50 seconds. As time goes by the efficiency takes a sudden turn for the worse because workers must inspect with seeing a monitor directly. In this paper, to solve these problems, we developed the imaging processing algorithm to inspect the defects in captured image of assembled CCM. The performances of the developed inspection system and its algorithm are tested on many samples. Experimental results reveal that the proposed system can focus the lens of CCM within 5s and we can recognize various types of defect of CCM modules with good accuracy and high speed.

• KIEAE Journal
• /
• 제7권6호
• /
• pp.127-132
• /
• 2007

Recently, the cases of lawsuit are growing on residential defects. Though, mostly residential construction companies are trying to mitigate resident's dissatisfaction due to keep the company's brand image by operating customer service team, some representatives of apartment buildings initiate litigations without any negotiation with countrepartner companys incited by planned suit lawyers. But lawsuit takes longtime to sentence(about more than one year), and judged amount of money are very few (averaging about 14%) compared with asserted amount of it. To suggest the improving alternatives, the types and problems of defect lawsuit on apartment complex are analyzed.

• 국제학술발표논문집
• /
• The 9th International Conference on Construction Engineering and Project Management
• /
• pp.213-221
• /
• 2022

Defects are the risk factors in the construction process of buildings. They cause damage, delaying the construction duration. They especially cause adverse effects on the top-down construction method. This study analyzed the degree of construction delay induced by each work type, focusing on defects in the top-down method. Then, we derived construction delay induction coefficient from different work types in order by using the severity of construction delay per defect and the occurrence probability of defect; this assessment model measures the impact of defects on construction delay for each work type. Furthermore, by comparing each work type based on the defect frequency and the construction delay induction coefficient, we found work types that need to be administered attentively. We identified that plastering work was easy to overlook, requiring caution in defect management. This study provides an efficient defect management system suitable for the buildings that are built using the top-down construction method.

• 한국정보과학회논문지:데이타베이스
• /
• 제34권2호
• /
• pp.99-108
• /
• 2007

본 논문에서는 TFT-LCD에 사용되는 편광 필름(polarized film)의 제작 과정 중 최종 단계에서 수행되는 필름의 결함 검출 및 결함 유형을 판정하기 위한 필름 결함 검출 시스템(Film Defect Inspection System: FDIS)을 설계하고 이를 구현하였다. 제안한 시스템은 영상 세그멘테이션 기법을 이용하여 편광 필름 영상으로부터 결함을 검출하였고, 검출된 결함의 영상을 분석하여 결함 유형을 판정할 수 있도록 설계되었다. 결함 유형의 판정은 결함 영역의 형태적 특성 및 질감(texture) 등의 특징을 추출하여 템플리트(template) 데이타베이스에 저장된 기준(reference) 결함 영상과 비교함으로써 수행된다. FDIS를 이용한 실험 결과, 테스트 영상에서 모든 결함 영역을 빠른 시간 안에 (평균 0.64초), 정확히 검출하였으며(Precision 1.0, Recall 1.0), 결함 유형을 판정하는 실험에서도 평균 Precision 0.96, Recall 0.95로 정확도가 매우 높은 것을 관찰할 수 있었다. 또한 회전 변형을 적용한 경우의 결함 유형 검출 실험에서도 평균 Precision 0.95, Recall 0.89로 제안한 기법이 회전 변환에 대하여 견고함을 보여 주었다.

• 상하수도학회지
• /
• 제31권6호
• /
• pp.619-628
• /
• 2017

As the 3D laser scanning technology capable of databaseing large sewage box culverts becomes possible, it is necessary to develop a standardization manual that can clearly distinguish the structural and operational defect types of box culver and analyze the defect data. In this study, we collected and analyzed defects in sewage box culverts of 14,827m in total by selecting three districts in Korea. The major defects were surface damages, and their defect densities were $2.17m^2/m$, $0.27m^2/m$ and $0.10m^2/m$ for aggregate exposure, Steel reinforcement exposure, and Steel reinforcement projecting. In order to support the decision of the box culverment management, it was divided into five grades and each defect code and defect score were allocated. The results of this study are useful for the diagnosis of the sewage box culverts in Korea and it is expected to support a decision making for management.