• Journal of Welding and Joining
• /
• v.7 no.3
• /
• pp.36-43
• /
• 1989

The furnace brazing in a Ar of copper to martensitic stainless steel(13.5Cr) using Cu-(5~8%)P-(0~8%)Sn powders was investigated. Shear strength, wettability, reacted layer, defect ratio at the stainless steel interface was evaluated. As Sn was added to the Cu-P powders, defect ratio and P content at the stainless steel interface decreased. And also as Sn was added, defect form at the stainless steel interface changed from the continuous layer to the discrete type, and shear strength of the brazed joint increased.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.23 no.3
• /
• pp.270-279
• /
• 2003

Parametric studies have been conducted into the variability of the factors affecting the ultrasonic testing applied to weldments. The influence of ultrasonic equipment, transducer parameters, test technique, job parameters, defect type and characteristics on reliability far defect detection and sizing was investigated by experimentation. The investigation was able to build up substantial bank of information on the reliability of manual ultrasonic method for testing weldments. The major findings of the study separate into two parts, one dealing with correlation between ultrasonic techniques, equipment and defect parameters and inspection performance effectiveness and other with human factors. Defect detection abilities are dependent on the training, experience and proficiency of the UT operators, the equipment used, the effectiveness of procedures and techniques.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2022.04a
• /
• pp.29-30
• /
• 2022

Tile defects in apartment houses are caused by a combination of various factors. These factors cannot be specified, and it is difficult to determine the exact cause because a number of causes are intertwined. In addition, because the climate of Korea is different by season, the coefficient of thermal expansion between materials is different, which is a major cause of tile defects. Therefore, this study analyzed the difference between the construction location and the period of defect occurrence according to the types of tile defects caused by environmental differences between indoor and outdoor environments. Two-way ANOVA was used, indoor and outdoor spaces were selected, and defect types were selected accordingly to show the difference in the occurrence period of each defect.

• Journal of Information Technology Applications and Management
• /
• v.29 no.6
• /
• pp.135-144
• /
• 2022

In this study, we transformed 4680 type lithium-ion batteries to 3-dimensional CAD models and present a methodology to detect defects using Radon inverse transformation. Transparency was applied to the model to make it look like a CT image when viewed from the front. One normal and three defect models were created and analyzed. The models were saved as image files while rotating at a certain angle. Then, we used the Radon inverse transformation to reconstruct the original 3D geometry from the image files. Finally, we successfully found defects in the defect models for three cases.

• Journal of Acupuncture Research
• /
• v.17 no.4
• /
• pp.79-87
• /
• 2000

Objectives : To evaluate the findings useful for differential diagnosis and associated abnormaiities of isthmic spondylolisthesis and degenerative spondylolisthesis on CT. Materials and methods : We reviewed retrospectively the CT images of 65 patients who were diagnosed spondylolisthesis during 3 years period. Our technique was 5mm slices at 5mm intervals with gantry angle to parallel the interspaces. Also reformatted sagittal views were taken. 41 patients were isthmic spondylolisthesis and 24 patients were degenerative spondylolisthesis. Resuits : Isthmic spondylolisthesis. 1. Isthmic type was more common at L5-S1. 2. The degree of anterior displacement was grade I and II. 3. The plane of defect was more horizontal than the usual facet joint. 4. The defect had an irregular shape. 5. Medial aspect of bone just anterior to defect had a small round prominence. 6. Anteroposterior elongation of the spinal canal was common. 7. Pseudobulging disk was common. 8. The most common associated abnormality was a HNP at the upper level of the defect. Degenerative spondylolisthesis. 1. Degenerative type was more common at L4-5. 2. The degree of anterior disptacement was grade I and II. 3. The Plane of facet joint was oriented obliquely instead of horizontally. 4. The posterior facet(inferior facet of superior vertebra) was anteriorly displaced. 5. Bony spur of the posterior portion of anterior facet was seen. 6. The facet joints often contain gas(vaccum phenomenum). 7. The most common associated abnormality was a HNP at the level of the displacement. Conclusions : CT is a highly accurate and most sensitive technique for recognition, differential diagnosis of isthmic and degenerative types and the detection of associated abnormalities.

• Journal of the Korea Institute of Building Construction
• /
• v.17 no.4
• /
• pp.385-391
• /
• 2017

The warranty liability period for defects in apartment buildings by work type is not based on scientific analysis, making the appropriateness of the term a culprit behind the lawsuits. Therefore, this research aims to evaluate the appropriateness of the warranty liability term of apartment buildings by identifying the current status of defects, in particular, caused by finishing works. That is because the number of defects, caused during the finishing works, accounted for the largest portion of the total defect cases of apartment buildings reported to the Apartment Defect Dispute Mediation Committee under the Ministry of Land, Infrastructure, and Transport of Korea between 2010 and 2011. The result from analyzing claims for defect repairs of the finishing works showed that most cases by work type continued to be made after two years, and only about 60% were charged within the warranty period. And, defects by work type have correlation, which needs to be considered for a better construction technique. Considering a low correlation between the possibility of defects and the construction performance rankings, which are highly relevant to the apartment preference. It is believed that there needs to be a qualification process for agencies that actually performs finishing works.

• The Korean Journal of Ceramics
• /
• v.4 no.2
• /
• pp.68-71
• /
• 1998

The effect of Mn and Nb additions on the electrical properties of BaTiO$_3$ has been studied by means of equilibrium electrical conductivity as a function of temperature, oxygen partial pressure(Po$_2$) and composition. If the manganese ion is added to the normal Ti site, i.e. BaTi$_{1-x}Mn_xO_{\delta-6}$, the equilibrium conductivity shows strong evidence of acceptor-doped behavior. The conductivity minimum, corresponding to the transition from oxygen excess, p-type behavior to oxygen deficient, n-type behavior with decreasing Po$_2$, is displaced to lower Po$_2$ and is broadened and flattened. The partial replacement of Mn ion with Nb decreases the acceptor-doped effect and the total replacement exhibits a typical donor-doped behavior. It was confirmed that unlike undoped or other acceptor-doped behavior. It was confirmed that unlike undoped or other acceptor-doped samples, for the p-type region, the electrical conductivity follows the 1/6th power dependence of oxygen partial pressure.

• Journal of Chest Surgery
• /
• v.20 no.2
• /
• pp.323-327
• /
• 1987

Majority of patients with total anomalous pulmonary venous drainage [TAPVD] have severe symptoms within the first few months of life. And early in the experience with correction of TAPVD, hospital mortality was high, especially in infant. In Sejong General Hospital, we operated on 3 infants with TAPVD of cardiac type. Repair was performed under the conventional cardiopulmonary by pass in one case and by the total circulatory arrest in other 2 cases. Interatial septum between enlarged coronary sinus opening and interatrial septal defect was excised and the coronary sinus was radically unroofed to make wide opening between left atrium and common pulmonary venous channel. The defect in atrial septum was closed with redundant pericardial patch. Postoperative courses were uneventful except transient dysrrhythmia of A-V dissociation. They are doing well on follow up check.

• Journal of Chest Surgery
• /
• v.27 no.1
• /
• pp.52-56
• /
• 1994

This is case report of total anomalous pulmonary venous return with atrial septal defect which were corrected surgically by intracardiac procedure under total cardiopulmonary bypass.Two patients were supracardiac type,cardiac and mixed type was each one.The mixed type was three years old female patient.She was diagnosed as atrial septal defect with partial anomalous pulmonary venous return[right pulmonary vein drains into superior vena cava and right atrium] and corrected as usual.After operation,she underwent exertional dyspnea and frequent tachycardia.Chest x-ray film showed pulmonary congestion.Follow up cardiac cineangiogram revealed that left pulmonary vein also anomalously drained into left innominate vein through vertical vein.Through left thoracotomy,anastomosis was successfully carried between left atrium and vertical vein without cardiopulmonary bypass and there was no sign of pulmonary artery obstruction for two years follow up.The other three patient were corrected successfully without complication and got good result.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.31 no.6 s.261
• /
• pp.651-658
• /
• 2007

A new tree-structured neural network classifier is proposed for the automatic real-time inspection of cold-rolled steel strip surface defects. The defects are classified into 3 groups such as area type, disk type, area & line type in the first stage of the tree-structured neural network. The defects are classified in more detail into 11 major defect types which are considered as serious defects in the second stage of neural network. The tree-structured neural network classifier consists of 4 different neural networks and optimum features are selected for each neural network classifier by using SFFS algorithm and correlation test. The developed classifier demonstrates very plausible result which is compatible with commercial products having high world-wide market shares.