• 대한안전경영과학회지
• /
• 제8권1호
• /
• pp.27-42
• /
• 2006

Considering in view of China's low price and Japan's high technology, the most important point is the quality of product. To increase the comparative power internationally all workingmen have to fulfill the responsibility to maximize the quality, and this is possible practiced under 'Zero Defect' spirit. To reduce the defect ratio to 'Zero' the workingmen have to recognize own fault, all the manufacturing process should be conducted under 'Fool Proof System', If done under this circumstances, then labor force can work comfortably and safely without nervousness and tiresome. The productivity and quality can increase ultimately and even foreign labor, imbecile child, old-aged labor can participate in work, which can reduce shortage of labor source. Therefore, in this study all defects in manufacturing process, it would be recognized the errors and mistakes caused by human.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2021년도 봄 학술논문 발표대회
• /
• pp.263-264
• /
• 2021

The purpose of this study is to empirically confirm the effect of the characteristics of construction workers on the occurrence of defects in construction. In this study, the degree of direct construction is measured through the ratio of the direct recruitment and outsourcing manpower of the original contractor, and the effect of this on the occurrence of defects is empirically analyzed using financial data. In addition, it is verified whether the degree of defect occurrence varies depending on the job skill level of the direct hired personnel inputted to the construction. Through this, it will be possible to prepare an argument for revitalizing the direct construction of construction companies and an opportunity to promote it.

• Journal of Periodontal and Implant Science
• /
• 제34권1호
• /
• pp.177-193
• /
• 2004

Several experimental studies showed that the application of small amounts of electric current to bone stimulated osteogenesis at the site of the cathode and suggested that electrical currents promote osseointegration around dental implants. The purpose of this study was to determine the effect of direct microcurrent to endosseous titanium implants placed in bone defects. The right and left 2nd, 3rd and 4th mandibular premolars in ten mongrel dogs (15Kg of weight) were extracted. One monthe later, Ti-machined screw type implants(3.8 mm diameter x 8.5 mm length, $AVANA^{(R)}$, Ostem) were placed in surgically created circumferential defect area(width 5mm, depth 4mm). The implants were divided into three groups according to the treatment modalities: Control group- implants without electrical stimulation; Experimental group I- implants with allogenic demineralized freeze dried bone grafting; and Experimental group II-implants allogenic demineralized freeze dried bone grafting and electric stimulation. The animals were sacrificed in the 4th and 8th week after implant placement and un-decalcified specimens were prepared for histological and histometrical evaluation of bone-implant contact ratio (BIC) and bone formation area ratio (BFA) in defect area. Some specimens at 8 weeks after implantation were used for removal torque testing. Histologically, there was connective tissue infiltration in the coronal part of defect area in control and the experimental group I, whereas direct bone contact was found in the experimental group II without connective tissue invasion. Average BIC ratios at 4 weeks of healing were 60.1% in the experimental group II, 47.4% in the experimental group I and 42.7% in the control. Average BIC ratios at 8 weeks after implantation were 67.6% in the experimental group II, 55.9% in the experimental group I and 54.6% in the control. The average BFA ratio was 84.0% in the experimental group II, 71.8% in the experimental group I and 58.8% in the control at 4 weeks, and the BFA ratios were 89.6% in the experimental group II, 81.4% in the experimental group I and 70.5% in the control at 8 weeks after implantation. The experimental group II showed also significantly greater BIC and BFA ratios compared to the control and the experimental group I (p<0.05). The removal torque values at 8 weeks after implantation were 56 Ncm in the experimental group II, 49 Ncm in the experimental group I and 43 Ncm in the control. There was a statistically significant difference among 3 groups (p<0.05). These results suggest that electrical stimulation improve and accelerate bone healing around endosseous titanium implants in bone defect.

• 한국레이저가공학회지
• /
• 제15권1호
• /
• pp.6-9
• /
• 2012

In TFT-LCD manufacturing process, various defects are generated by manufacturing machine trouble or particle. These defects can be repaired through the TFT-Laser repair process that only can't be automated in TFT-LCD manufacturing Process. In this Paper, we propose auto defect algorithm for TFT-LCD laser repair machine using image processing algorithm in order to automate process. Proposed algorithm can detect very small defects (< 2um) in 98% success ratio, and generated laser repair path guarantee highly precise position accuracy. Through proposed system, much of the work still done the old-fashioned way, by hand, can be automated and manufacturing company can be strengthed the competitiveness of cost.

• 한국정밀공학회지
• /
• 제28권9호
• /
• pp.1070-1077
• /
• 2011

This study intends to assess the defect in the weld zone of titanium grade 2 plate in terms of acoustical anisotropy based on the angle beam method. Depending on the rolling direction, the ratio of wave velocity was found to be 1.08 and the difference in the angle of refraction was more than seven degrees, confirming the presence of acoustical anisotropy. Thus for measuring the length of defect in the weld zone of the titanium plate (thickness of 10mm), the distance amplitude characteristics curves of titanium, TDACC-R and TDACC-T were constructed for the measurements in consideration of the acoustical anisotropy on CRT of the ultrasonic testing equipment. As a result, when the distance amplitude characteristics curve corresponds to the rolling direction, the length of defect was close to the actual measurement within 1mm and when different, the difference was found to be over 4mm. It was affirmed that the acoustical anisotropy should be taken into consideration when measuring the length of defects in the weld zone of the titanium plate with the presence of acoustical anisotropy.

• Journal of Chest Surgery
• /
• 제17권2호
• /
• pp.244-249
• /
• 1984

Surgical treatment of partial endocardial cushion defect was accomplished in Feb. 1984 in this department. The 5 year old male patient had history of frequent upper respiratory tract infection and since his age of 3 years dyspnea on exertion and palpitation were noted but there were no cyanosis and clubbing. A thrill was palpable on the apex and grade IV/IV harsh systolic ejection murmur and diastolic murmur was audible on it. Liver was palpable about 3 finger breadths and no ascites. Chest X-ray revealed increased pulmonary vascularity, moderate cardiomegaly [C-T ratio; 0.69], and enlarged left atrium. EKG showed first degree heart block, RVH, LVH, and LAD. Echocardiogram showed paradoxical ventricular septal movement and abnormal diastolic movement of the anterior leaflet of mitral valve. Right heart catheterization resulted left to right shunt [Qp:Qs:2.1:1 ] and moderate pulmonary hypertension [60/40 mmHg]. Left ventriculogram showed mitral regurgitation [Grade III/IV] and filling of left atrium and right atrium nearly same time. Operative findings were: 1.Primum type atrial septal defect [3x2 cm] 2.Cleft on the anterior leaflet of mitral valve. 3.No interventricular communication and cleft of tricuspid valve leaflet. The mitral cleft was repaired with 4 interrupted sutures. The primum type atrial septal defect was closed with Dacron patch intermittently at endocardial cushion and continuously remainder. The post operative course was uneventful and discharged on 22nd postoperative day in good general conditions.

• 한국해양공학회지
• /
• 제10권1호
• /
• pp.53-64
• /
• 1996

In this paper, rotating bending fatigue tests have been carried out to investigate the growth behabiors of surface fatigue crack initiated from a small artificial surface defect, that might exist in real structures, on 2024-T3 and 6:4 brass. The test results are analysed in the viewpoints of both strength of materials and fracture mechanics, it can be concluded as follows. The effect of a small artificial surface defect upon the fatigue strength is very large. The sensitivity of 2024-T3 on the defect is higher than that of 6:4 brass. The growth behavior of the surface fatigue crack of 2024-T3 is different from that of 6:4 brass. The growth rate of the surface fatigue crack of 2024-T3 is considerably rapid in the early stage of the fatigue life and apt to decrease in the later stage. It was impossible to establish a unifying approach in the analysis of crack growth begabior of 2024-T3 and 6:4 brass using the maximum stress intensity factor because of their dependence on stress level. But if the elastic strain and cyclic total strain intensity factor range were applied to obtain the growth rate of surface fatigue cracks of the materials, the data were found to be nearly coincided.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2007년도 추계학술대회 논문집
• /
• pp.364-367
• /
• 2007

In nano-imprint lithography (NIL) process, which has shown to be a good method to fabricate polymeric patterns, several kinds of pattern defects due to thermal effects during polymer flow and mold release operation have been reported. A typical defect in NIL process with high aspect ratio and low resist thickness pattern is a resist fracture during the mold release operation. It seems due to interfacial adhesion between polymer and mold. However, in the present investigation, FEM simulation of NIL molding process was carried out to predict the defects of the polymer pattern and to optimize the process by FEA. The embossing operation in NIL process was investigated in detail by FEM. From the analytical results, it was found that the lateral flow of polymer resin and the applied pressure in the embossing operation induce the weld line and the drastic lateral strain at the edge of pattern. It was also shown that the low polymer-thickness result in the delamination of polymer from the substrate. It seems that the above phenomena cause the defects of the final polymer pattern. To reduce the defect, it is important to check the initial resin thickness.

• Journal of Chest Surgery
• /
• 제10권2호
• /
• pp.268-273
• /
• 1977

During the period from March, 1963, to November, 1977, forty-eight patients with secundum type atrial septal defects have undergone surgical repair using cardiopulmonary bypass with a pump oxygenator at the Seoul National University Hospital. Twenty-six [55 percent] of the patients were females and Twenty-two [45 percent] were males. The patients varied in age from 3 years to 51 years. We have divided secundum defects into three types. These are: 1] the high defect; 2] Ovale type defect; and 3] low defect including the defect in the area of the coronary sinus. An ovale type defect was present in forty-one cases [85 percent]. Partial anomalous pulmonary venous connections were present in two patients in the high defect group. All of the forty-eight patients had had right heart catheterization before operation. The pulmonary to systemic flow ratio [Qp/Qs] was determined in our 38 patients. The Qp/Qs was less than 1.5/1 in only five of the 38 patients. Among the 33 patients with moderate and severe left-to-right shunts [Qp/Qs 1.6-3.5/1], the systolic pulmonary artery pressures. ranged from 30 to 80 mm Hg. Large left-to-right shunts [Qp/Qs>3.6/1] were present in 13 patients. The postoperative complications occurred in 13 patients [27. 1 percent]. Postoperative wound infections were the most frequent complications being present in 6 patients [12.5%]. Forty-six of the patients with secundum atrial septal defects survived surgical repair of their defects. Thus the hospital mortality of surgery was 4.2 percent. The causes of death in the early postoperative period were: 1] low cardiac output syndrome related to severe pulmonary hypertension in one case; and 2] postoperative several bleeding in one case.

• 한국가스학회지
• /
• 제16권2호
• /
• pp.18-24
• /
• 2012

본 연구는 Type II 가스실린터의 20,000 회 피로시험과 파열시험시 음향방출시험을 병행하여 용기의 손상정도를 평가하고자 하였으며, 실험에 사용된 용기는 결함 크기가 $3mm{\times}3mm{\times}50mm$ (폭${\times}$깊이${\times}$길이)이고 결함 방향이 용기의 종방향 및 횡방향인 인공결함용기와 건전한 용기 등 세 종류이다. 피로시험시 발생된 음향방출신호는 종방향결함의 경우 전체 신호 중 결함에서 발생된 이벤트의 비율이 50 % 이상이며, 음향방출신호의 위치표정도 매우 정확하게 일치하였다. 또한 파열시험에서는 인공결함용기가 결함 위치에서 에상파열압력보다 낮은 압력으로 파열될거라는 예상과는 달리 인공결함용기의 파열압력은 건전한 용기와 큰 차이가 없었으며, 단지 종방향 인공결함용기의 경우 파열위치가 결함 위치와 근접하게 발생하였다. 이는 종방향 결함의 길이만큼 복합재료의 두께가 얇아지는 효과로 나타나게 되어 금속라이너의 피로반복시 결함 발생과 성장위치에 영향을 미친 것으로 판단된다.