• Journal of Chest Surgery
• /
• 제32권7호
• /
• pp.628-636
• /
• 1999

배경: 최근에 완전방실중격결손의 해부학적 구조에 대한 이해가 증가됨에 따라서 본원에서는 수술방법에 있 어서 여러 가지 변형을 시도하게 되었다. 대상 및 방법: 1997년 5월부터 1998년 7월까지 8명의 완전방실중 격결손 환자를 수술하였다. 남녀 각각 3명, 5명이었으며 나이는 2개월에서 28개월까지 분포하였고 평균 몸무 게는 6.0$\pm$2.2 Kg이었다. 심장의 해부학적 구조에 따라서 3명의 환아에서는 심실중격결손을 일차적으로 봉합 하여 수술을 단순화하였다(Group I). 좌심실유출로 협착의 가능성이 있는 2명의 경우에는 통상적인 방법대로 2개의 포편을 이용하였다(Group II). 그리고 불균형 완전방실중격결손의 경우에는 심실중격결손을 막는 포편 을 우심실에 치우쳐서 막고 심방중격을 새로 만들거나 좌측 방실판막의 부족한 판막부위를 자가 심낭막으로 메꾸어 주거나 좌측 방실판막이 parachute valve 인 경우에는 2개의 판막입구를 만들어 주었다(Group III). 결과: 모든 환자가 수술후 만족스러운 혈류역학을 보였으며 7명에서는 평균 3$\pm$1 일만에 인공호흡기 이탈이 가능하였으며 1명의 환자는 심장의 문제없이 폐질환으로 24일만에 인공호흡기를 이탈하였다. 수술후 합병증 으로 III군에서 판막성형을 시행한 좌측 판막이 찢어지면서 판막역류가 점진적으로 심해진 1명에서 2주만에 재수술을 하였다. 조기 및 만기사망은 없었으며 수술후 심장초음파검사에서 약간의 좌측 방실판막협착이 III 군에서 1명 있었으며(평균압력차 6.5 mmHg), 좌측 방실판막역류가 7명(87.5 %)의 환아에서 Grade I 이하였으 며, 우측 방실판막역류는 모든 환아에서 Grade I 이하였다. 결론: 완전방실중격결손의 수술시 해부학적인 구 조에 따라서 선택적으로 일부 환아에서는 심실중격결손을 일차적으로 봉합함으로써 수술을 단순화할 수 있 으며 우심실이 발달된 불균형 완전방실중격결손에서도 변형수술방법을 통하여 양심실성 교정을 하여 좋은 결과를 얻을 수 있었다.

• 한국자기학회지
• /
• 제19권5호
• /
• pp.161-164
• /
• 2009

주기적 결함이 철 단층의 자성에 미치는 영향을 탐구하기 위해 전전자 총퍼텐셜 보강평면파 에너지 띠 방법을 이용하여 전자구조를 계산하였다. 결함은 원자 한 개가 빈 점결함, 각기 3개, 5개, 7개의 원자자리가 비어 있는 I 자형, + 모양, H 자 모양을 고려하였다. 빈자리에 가까이 있는 철 원자의 자기모멘트가 가장 컸으며, 결함의 원자수가 증가할수록 그 값도 증가하여, 점결함의 경우 3.08 보어마그네톤이었으며, I 자형, + 모양 및 H자 모양의 경우 각기 3.09, 3.15, 3.30 보어마그네톤이었다.

• 한국생산제조학회지
• /
• 제19권1호
• /
• pp.57-64
• /
• 2010

Metal Injection Molding (MIM) is attractive because it produces consistent, complex-geometry components for high-volume, high-strength, and high-performance applications. Also MIM using in optical communication field, display field, and semi-conductor field is a cost-effective alternative to metal machining or investment casting parts. It offers tremendous single-step parts consolidation potential and design flexibility. The objective of this paper is to study the suitability of design, flow analysis, debinding and sinterin processes, and capability analysis. The suitable injection conditions were 0.5~1.5 second filling time, 11.0~12.5 MPa injection pressure derived from flow analysis. The gravity of the product is measured after debinding an sintering. The maximum and minimum gravity levels are 7.5939 and 7.5097. the average and standard deviation are 7.5579 and 0.0122; when converted into density, the figure stands at 98.154%. According to an analysis of overall capacity, PPM total, which refers to defect per million opportunities(DPMO), stands at 166,066.3 Z.Bench-the sum of defect rates exceeding the actual lowest and highest limits-is 0.97, which translates into the good quality rate of around 88.4% and the sigma level of 2.47.

• 상하수도학회지
• /
• 제31권1호
• /
• pp.29-37
• /
• 2017

To estimate pollution sources in the watershed with various industries, the simulation of contamination route and distribution of 2-methyl-4,6-dinitriophenol(DNOC) were performed with a numerical model Hydro Geo Sphere. This study was performed calculations of the load using the measured concentration and simulated flow rate. And, the river was divided by the sampling sites at the mainstream, and the contribution rate at downstream sampling sites was calculated for each section. The results showed the concentration of the downstream sampling sites were decided by the concentration of upstream sites, and the contribution rates of the tributaries were calculated below 10%. The results also showed that the impact of the potential sources in Section 1(Geumho1 ~ Geumho2) and Section 5(Geumho5 ~ Geumho6) was larger than in the other area. In Section1 and Section5, It seemed to require detailed investigation.

• 의료법학
• /
• 제12권2호
• /
• pp.65-117
• /
• 2011

This article analyzes the case (2008Da16776) which has the issue how patients have to prove causal relationship when patients claim against pharmaceutical companies alleging that patients were infected with virus due to contaminated blood products. The Supreme court held that: (1) if patients prove that they didn't have symptoms suggesting virus infection before administration of blood products, the virus infection had been confirmed after administration of blood products, and there were significant potential of contamination of the blood products with the virus, the defect in blood products or the negligence of pharmaceutical company in making blood products shall be presumed to cause the infection of the victim. (2) The pharmaceutical companies could reverse the presumption by proving the blood products were not contaminated, but the fact that the victims were treated with the blood products manufactured by other companies or had received blood transfusions is not enough to reverse the presumption. The case is the first decision whether the burden of proof about causal relationship could be reduced in pharmaceutical product liability lawsuit. Hereafter pharmaceutical product liability cases, it would be necessary to reduce the burden of proof about causal relationship in order to make substantive equality between patients and pharmaceutical companies.

• 한국표면공학회지
• /
• 제46권4호
• /
• pp.153-157
• /
• 2013

The defect like the void or seam is frequently generated in the PCB (Printed Circuit Board) Via-Filling plating inside via hole. The organic additives including the accelerating agent, inhibitor, leveler, and etc. are needed for the copper Via-Filling plating without this defect for the plating bath. However, the decomposition of the organic additive reduces the lifetime of the plating bath during the plating process, or it becomes the factor reducing the reliability of the Via-Filling. In this paper, the interaction of each organic additives and the decomposition of additive were discussed. As to the accelerating agent, the bis (3-sulfopropyl) disulfide (SPS) and leveler the Janus Green B (JGB) and inhibitor used the polyethlylene glycol 8000 (PEG). The research on the interaction of the organic additives and decomposition implemented in the galvanostat method. The additive decomposition time was confirmed in the plating process from 0 Ah/l (AmpereHour/ liter) to 100 Ah/l with the potential change.

• 한국소음진동공학회논문집
• /
• 제21권2호
• /
• pp.146-153
• /
• 2011

Model based machine condition diagnosis methods are generally using a normal and many failure models which need sufficient data to train the models. However, data, especially for failure modes of interest, is very hard to get in real applications. So their industrial applications are either severely limited or impossible when the failure models cannot be trained. In this paper, continuous hidden Markov model(CHMM) with only a normal model has been suggested as a very promising machine condition diagnosis method which can be easily used for industrial applications. Generally hidden Markov model also uses many pattern models to recognize specific patterns and the recognition results of CHMM show the likelihood trend of models. By observing this likelihood trend of a normal model, it is possible to detect failures. This method has been successively applied to arc weld defect diagnosis. The result shows CHMM's big potential as a machine condition monitoring method.

• Archives of Reconstructive Microsurgery
• /
• 제24권1호
• /
• pp.32-36
• /
• 2015

The reconstruction of recurrent pressure sores is challenging due to a limited set of treatment options and a high risk of flap loss. Successful treatment requires scrupulous surgical planning and a multidisciplinary approach. Although the tensor fascia lata flap is regarded as the standard treatment of choice-it provides sufficient tissue bulk for a deep trochanteric sore defect-plastic surgeons must always consider the potential of recurrence and accordingly save the second-best tissues. With the various applications of anterolateral thigh (ALT) flaps in the reconstructive field, we report two cases wherein an alternative technique was applied, whereby pedicled ALT fasciocutaneous island flaps were used to cover recurrent trochanteric pressure sores. The postoperative course was uneventful without any complications. The flap provided a sound aesthetic result without causing a dog-ear formation or damaging the lower-leg contour. This flap was used as an alternative to myocutaneous flaps, as it can cover a large trochanteric defect, recurrence is minimized, and the local musculature and lower-leg contour are preserved.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1995년도 하계학술대회 논문집 B
• /
• pp.866-870
• /
• 1995

To make a mobile robot to get to a goal point, path which connects the mobile robot and the goal point is needed and a path planning is necessary. There are various kinds of a path planning. Well known methods are skeleton method, cell decomposition method and potential field method. But each method has both fortes and defects. In this paper, we propose a new method of path planning to find a path for mobile robot. It is obtained by modifying a Voronoi diagram. An original Voronoi diagram can make a safe path but its result is not satisfied. First defect of path, finded by the original Voronoi diagram, is sulplus of safty which make a path longer. Second defect is that the original Voronoi diagram method has a problem of connecting the Voronoi daigram with start/goal point of mobile robot. These defects are removed in proposed algorithm in this paper. We define a function to show the quality of paths. And by computer simulation, paths are compared and its result are shown.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제31권6호
• /
• pp.492-495
• /
• 2005

The role of cultured bone marrow stromal cells (BMSCs) in peripheral nerve regeneration was examined using an established rabbit peroneal nerve regeneration model. A 15-mm peroneal nerve defect was bridged with a vein filled with BMSCs $(1{\times}10^6)$, which had been embedded in collagen gel. On the contralateral side, the defect was bridged with a vein filled with collagen gel alone. When the regenerated tissue was examined 4, 8 and 12 weeks after grafting, the number and diameter of the myelinated fibers in the side with the BMSCs were significantly higher than in the control side without the BMSCs. This demonstrates the potential of using cultured BMSCs in peripheral nerve regeneration.