• Journal of the Korean Society of Safety
• /
• v.20 no.2 s.70
• /
• pp.140-145
• /
• 2005

The PL(Product Liability) Law has been going into effect in Korea since July 2002. Accordingly, a company's responsibility for customers who are damaged by the defect in the product safety has been gradually strict and imposed burden on management. Not only general consumers but also labors who work with machine in the field of production are included in the concept of victim of the PL Law. That is to say, when a worker is damaged by the defect of machine he can institute a PL lawsuit more aggressively, not just get the industrial accident compensation as usual, only if not his own fault but the defect of machine used in the course of production can be demonstrated. This paper intends to present suggestions to PL prevention of manufacturing companies of industrial machine through the case research of PL accidents in the area of industrial safety.

• Journal of the Korean Society of Safety
• /
• v.14 no.3
• /
• pp.25-32
• /
• 1999

This study has been performed to investigate the stress distribution around defects that behave as stress concentrators. Besides, the effect of stress interaction effects on the initiation of primary cracks were also investigated by rotary bending fatigue tests which were performed with specimens drilled micro surface defects and the stress distribution was analyzed using Finite Element Method. In addition, the stress interaction effects around defects and cracks were investigated by comparing the results of experiments and F.E.M. The results obtained are summarized as follows ; 1) Area which slip and micro cracks initiated at micro surface defects is between the maximum shear stress points and this area is over than ${\pm}30^{\circ}$ from the maximum stress point along the defect edge. 2) The stress interaction effect for the small size defect is larger than that of large size defect when the interval between them is near 3) Interval which there is no shear stress interaction effect analyzed by F.E.M. is larger than that of experimental results.

• Imaging Science in Dentistry
• /
• v.47 no.4
• /
• pp.269-273
• /
• 2017

Mandibular bone depression, also known as Stafne bone cavity, is defined as a bone depression filled mainly with salivary gland tissue. Parotid gland bone defects are infrequently observed. We report the case of a 52-year-old male patient who underwent radiographic examinations due to temporomandibular joint dysfunction, and a radiolucent area was detected in the mandibular ramus, with a provisional diagnosis of traumatic bone cyst or parotid mandibular bone defect. The patient was then referred for magnetic resonance imaging, which demonstrated a hyperintense area eroding the mandibular ramus, which corresponded to glandular tissue. Although the defect was a benign lesion, radiolucencies in the mandibular ramus lead to concerns among professionals, because their radiographic features can resemble various intrabony neoplastic lesions, such as giant cell tumors or benign tumors of the parotid gland.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.17 no.1
• /
• pp.86-93
• /
• 2017

In this paper, we propose a novel defect detection method using component tree representations of scanning electron microscopy (SEM) images. The component tree contains rich information about the topological structure of images such as the stiffness of intensity changes, area, and volume of the lobes. This information can be used effectively in detecting suspicious defect areas. A quasi-linear algorithm is available for constructing the component tree and computing these attributes. In this paper, we modify the original component tree algorithm to be suitable for our defect detection application. First, we exclude pixels that are near the ground level during the initial stage of component tree construction. Next, we detect significant lobes based on multiple attributes and edge information. Our experiments performed with actual SEM wafer images show promising results. For a $1000{\times}1000$ image, the proposed algorithm performed the whole process in 1.36 seconds.

• Proceedings of the KWS Conference
• /
• 2006.05a
• /
• pp.148-150
• /
• 2006

In this paper, the applicability of an UET(ultrasound excited thermography) for a defect detection of the welded receptacle is described. An UET(ultrasound excited thermography) is a defect-selective and fast imaging tool for damage detection. A high power ultrasound-excited vibration energy with pulse durations of 280ms is injected into the outer surface of the welded receptacle made of Al material. An ultrasound vibration energy sent into the welded receptacle propagate inside the sample until they are converted into the heat in the vicinity of the defect. The injection of the ultrasound excited vibration energy results in heat generation so that the defect is turned into a local thermal wave transmitter. Its local heat emission is monitored by the thermal infrared camera. And they are processed by the image recording system. Measurement was performed on aluminum receptacle welded by using Nd:YAG laser. The observed thermal image revealed two area of defects along the welded seam.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2011.05a
• /
• pp.177-178
• /
• 2011

Recently a great deal of people are taking legal action against the housing provider due to the defects of their Apartment house. And most of the housing companies are spending a huge amount of expenses and efforts to keep their brand value. This essay will carry out time series analysis the 20 housing district which are constructed by huge construction companies. This analysis itemised by metropolitan area(Seoul) and others to keep the degree of reliability, and converted future defect maintenance cost into current cost applied by discount rate to figure out suitability of defect maintenance cost. Even though, this essay is not able to represent standard of defect maintenance cost due to the insufficiency of record, while it will be assisted as a referance when long-term record of time series is estabilished.

• Journal of Chest Surgery
• /
• v.27 no.2
• /
• pp.161-165
• /
• 1994

We have experienced a case of ventricular septal defect due to blunt chest trauma. A 22 year old male patient was admitted due to chest pain after Motor cycle accident on July 1st,1993. On 5th hospital day, sudden onset of dyspnea was noted and auscultation represented newly developed systolic murmur. A cardiac catheterization and Left ventriculogram revealed ruptured septum at the apical portion. Because there was open wound on anterior chest wall and congestive heart failure was medically controlled, the patient was discharged for elective operation. He was readmitted on August 14th, 1993.At operation, ventricular septal defect was found in apico-posterior muscular septal area, about 2.0 x 1.5 cm in size. The defect was repaired by double velour patch with interrupted suture and ventriculotomy was closed with Teflon felt. The patient`s postoperative course was uneventful and discharged 10 days postoperatively without complication. The patient have been followed up~ for 2 months. He is on functional class I with small amount of residual shunt at the ventricular septum.

• Proceedings of the KIEE Conference
• /
• 1998.11c
• /
• pp.723-725
• /
• 1998

STI CMP process are substituting gradually for LOCOS(Local Oxidation of Silicon) process to be available below sub-0.5um technology and to get planarized. The other hand, STI CMP process(especially STI CMP with RIE etch back process) has some kinds of defect like Nitride residue, Torn Oxide defect, etc. In this paper, we studied how to reduce Torn Oxide defects after STI CMP with RIE etch back process. Although Torn Oxide defects which occur on Oxide on Trench area is not deep and not sever, Torn oxide defects on Moat area is sometimes very deep and makes the yield loss. We did test on pattern wafers witch go through Trench process, APCVD process, and RIE etch back process by using an REC 472 polisher, IC1000/SUV A4 PAD and KOH base slurry to reduce the number of torn defects and to study what is the root causes of torn oxide defects.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.25 no.7
• /
• pp.952-957
• /
• 2001

In the glass forming process, the phenomena of hyperbolic heat conduction in the hot mold with an inner defect are studied analytically. It is shown that the temperature predicted by the parabolic model is underestimated compared to the one by the hyperbolic model. As the rmal wave is reflected from the area with defects and then arrives at the surface supplied by the heat flux, it is expected that there exists thermal shock in the materials. The area with defects is assumed to be adiabatic since its thermal conductivity is much lower compared to the one of the material. The results also indicate that the sudden temperature -jump in the mold surface can cause diverse problems such as glass defect (embryo mark, etc), oxidation of mold and coating, and change of material properties.

• Archives of Reconstructive Microsurgery
• /
• v.25 no.1
• /
• pp.15-18
• /
• 2016

Any types of burn injury that involve more than deep dermis often require reconstructive treatment. In gluteal region, V-Y fasciocutaneous advancement flap is frequently used to cover the defect. However, in case of large burn wounds, this kind of flap cannot provide adequate coverage because of the lack of normal surrounding tissues. We suggest V-Y adipofascial flap using the surrounding superficially damaged tissue. We present the case of a patient who was referred for full-thickness burn on gluteal region. We performed serial debridement and applied vacuum-assisted closure device to defective area as wound preparation for coverage. When healthy granulation tissue grew adequately, we covered the defect with surrounding V-Y adipofascial flap and the raw surface of the flap was then covered with split-thickness skin graft. We think the use of subcutaneous fat as an adipofascial flap to cover the deeper defect adjacent to the flap is an excellent alternative especially in huge defect with uneven depth varying from subcutaneous fat to bone exposure in terms of minimal donor site morbidity and reliability of the flap. Even if the flap was not intact, it was reuse of the adjacent tissue of the injured area, so it is relatively safe and applicable.