• Journal of the Korean Society for Precision Engineering
• /
• v.21 no.8
• /
• pp.57-64
• /
• 2004

This study deals with the prediction of defect location which can be occurred in structure. The existing methods was very difficult to be applied to predict it, because of complex numerical formula. The triangulation method proposed in this study can predict the source location easily with small amount of data. The arrival time of wave can be directly converted into the distance between sensors. For this purpose, the propagation velocity was measured by Rayleigh wave, and the propagation behavior was analyzed. The welded workpiece is adapted to investigate for the consideration of jointed part in structure, The propagation velocity of signal was measured in welded workpiece and the revised algorithm of source location was proposed.

• Journal of Advanced Navigation Technology
• /
• v.24 no.3
• /
• pp.205-211
• /
• 2020

Wiring defect is a major concern for safe aircraft operations. However, troubleshooting process of a wiring defect is very difficult due to extensive and complex wiring system and installed location. Recently, time domain reflectometer (TDR) equipment that enables effective defected wiring troubleshooting has been introduced. Unfortunately, TDRs have not practically adopted by most of airlines' maintenance departments because the effectiveness and usefulness of TDRs have not been verified. This study was conducted to verify if TDRs can identify the location and type of defected aircraft wiring, and whether they can be applied for troubleshooting purposes. Experimental plan was established by using various wires and connections applied to actual aircraft and the observed results were compared with the TDR operation guide. The usability of the TDR in actual aircraft wiring defect detection may be acceptable as the experimental results showed similar results to the TDR operation guide.

• Archives of Plastic Surgery
• /
• v.32 no.4
• /
• pp.447-453
• /
• 2005

The coverage of soft tissue defects around the knee joint or upper one third of lower leg presents a difficult challenge to the reconstructive surgeon. Various reconstructive choices are available depending on the location, size and depth of the defect. The authors present their clinical application of a medial sural artery perforator island flap as a useful alternative method for upper one third of lower leg and knee reconstruction. From 2002 to 2004, we operated total 4 patients (total 4 flaps) using the medial sural artey perforator island flap for coverage of the defect on upper one third of lower leg and knee, of 4 patients, 3 patients was men and one was woman. Average patient age was 54.6 years. The largest flap obtained was 10x8cm2. Postoperative follow up of the patients ranged from two to 33 months. In two cases, defects was located on upper one third of lower leg and in other two cases, defects were on the knee. All four cases had bone exposure open wound. In angiography, 2 cases had injured in the anterior tibial artery, 1 case had injured in the posterior tibial artery. There were no diabetes or other vascular disease. All 4 flaps were survived completely, without minor complications such as venous congestion and hematoma. Donor morbidity was restricted substantially to the donor linear scar. There were no functional impairment. As the main advantages of the medial sural perforator island flap, it ensures constant location and reliable blood supply without sacrificing any main source artery or damaging underlying muscle. This procedure is valuable extension of local flap for defect coverage with minimal functional deficit donor site and good aesthetic result on the defect. We consider it as one of the useful methods of the upper one third of lower leg and knee reconstruction.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.26 no.2
• /
• pp.122-129
• /
• 2006

Shearography is one of optical methods that has been applied to nondestructive testing (NDT) and strain/stress analysis. The technique has the merit of the directly measuring relative displacement, which is insensitive to environmental vibration disturbance. Previous studies about the method have emphasized on extending its application to new fields and lack insufficient research on effective parameters for qualitative and quantitative evaluation of defects. In this paper, the influence of shearing amount on the detection of an internal defect is investigated. In experiment, slender defects along longitudinal direction of pipeline are artificially designed and detection results according to the change of shearing amount are analyzed. Based on the investigation, we propose the technique for the determination of defect size and accurate source location.

• Archives of Craniofacial Surgery
• /
• v.22 no.6
• /
• pp.324-328
• /
• 2021

Lip defects often occur following wide excision as a surgical treatment for squamous cell carcinoma of the oral cavity. Defects larger than one-half of the lip cannot be closed primarily and require flap surgery. Reconstruction of the oral sphincter function can be achieved by means of a local flap using the like tissue, rather than with a free flap utilizing different tissues. A defect of the lower lip requires reconstruction using different techniques, depending on its size and location. Herein, we present the case of a patient exhibiting a lip defect spanning more than two-thirds of the lower lip, after a wide resection due to squamous cell carcinoma. The defect was reconstructed using an Abbe flap and a staircase flap. Revision was performed after 16 days. The patient's oral competencies were fully restored 3 months postoperatively, and the esthetic results were ideal. Based on our experience, a combination of the Abbe and staircase flaps can produce excellent functional and esthetic outcomes in the reconstruction of a lower lip with a large defect. It can serve as a reliable reconstruction option for defects spanning more than two-thirds of the lower lip, not including the oral commissures.

• Journal of Korean Institute of Industrial Engineers
• /
• v.21 no.3
• /
• pp.371-385
• /
• 1995

The yield of semiconductor chips is dependent not only on the average defect density but also on the distribution of defects over a wafer. The distribution of defects leads to consider a cluster index. This paper briefly reviews the existing yield prediction models ad proposes a new cluster index, which utilizes the information about the defect location on a wafer in terms of the coefficient of variation. An extensive simulation is performed under a variety of defect distributions and a yield prediction model is derived through the regression analysis to relate the yield with the proposed cluster index and the average number of defects per chip. The performance of the proposed simulation-based yield prediction model is compared with that of the well-known negative binomial model.

• Journal of Welding and Joining
• /
• v.19 no.6
• /
• pp.608-613
• /
• 2001

In this study, the rotary bending fatigue test was carried out with two kinds of base metal, martensite stainless steel STR3 and austenite stainless steel STR35 and the dissimilar friction welded material with them. To compare the fatigue fifes according to the notch positions, the small circular defect was worked on the bonded line, 1.0mm and 0.5mm distance form the bonded line. The fatigue limits of the STR3 and STR35 base metal were 429.0MPa and 409.4MPa respectably. In comparison with fatigue life at the same notch positions, the STR35 specimens showed about 190% for base metal, 82% for 1.0mm distance notched specimens higher than that of the STR3. But the fatigue life of the 0.5mm distance notched STR35 specimen showed about 35% lower than that of the STR3 specimen. And the bonded line notched specimen was much lower fatigue life than the other specimens because of separation of the bonded line.

• Journal of Chest Surgery
• /
• v.33 no.4
• /
• pp.316-319
• /
• 2000

Double-outlet left ventricle with ventricular septal defect and pulmonary stenosis was conventionally repaired with extracardiac conduit or pulmonary artery translocation. Here, we report an anatomically repaired double-outlet left ventricle without extracardiac conduit or pulmonary artery translocation in an 11 month old patient who had undergone palliative systemic-pulmonary shunt at a nonatal period. The location of ventricular septal defect, both great arteries and coronary arteries made it possible to reconstruct the right ventricular outflow tract using on-lay patch after incision and undercutting the tissue between the ventriculotomy and the pulmonary arteriotomy.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.35 no.4
• /
• pp.1-9
• /
• 2012

Decisions on reliability screening rules and burn-in policies are determined based on the estimated reliability. The variability in a semiconductor manufacturing process does not only causes quality problems but it also makes reliability estimation more complicated. This study investigates the nonuniformity characteristics of integrated circuit reliability according to defect density distribution within a wafer and between wafers then develops optimal burn-in policy based on the estimated reliability. New reliability estimation model based on yield information is developed using a spatial stochastic process. Spatial defect density variation is reflected in the reliability estimation, and the defect densities of each die location are considered as input variables of the burn-in optimization. Reliability screening and optimal burn-in policy subject to the burn-in cost minimization is examined, and numerical experiments are conducted.

• Journal of the Korean Society for Precision Engineering
• /
• v.21 no.9
• /
• pp.63-68
• /
• 2004

The high pressure vessels that are constructed by welding process have many welding lines and most of the leakage defects are occurred on these welding lines. The acoustic emission(AE) technique has adopted to detect the defect location and leakage on welding parts, but the AE signal in leakage are incomplete due to the attenuation, reiteration, instability and limit of defect size. To overcome these troubles, the experiments in this study are conducted to measure the indirect media-propagated AE signal perpendicular to the leakage hole. The AE signals that are acquired from the direct and indirect media are analyzed, and the reliability of the indirect media-propagated AE signal are examined experimentally. By AE signal investigation, this method can be adopted to detect efficiently the leakage in welding parts.