• Structural Engineering and Mechanics
• /
• 제44권6호
• /
• pp.705-733
• /
• 2012

In this work, an experimental examination was carried out to study interfacial stresses developed at the junction zones between carbon fiber reinforced plastic (CFRP) fabrics (~1 mm thickness) and tensile concrete portion in CFRP retrofitted RC beams. In this respect, initially six similar RC beams of $150{\times}150{\times}1000mm$ dimensions were prepared. Three of which were strengthened with CFRP fabrics at the tensile side of the beams. Furthermore, a notch was cut at the center of the bottom surface for all of the studied beams. The notch was 15 mm deep and ran across the full width of tension side of the beams. The mentioned interfacial stresses could be calculated from strains measured using strain gauges mounted on the interface zone of the tensile concrete and the CFRP sheet. Based on the results obtained, it is shown that interfacial stresses developed between CFRP fabrics and RC beam had a noticeable effect on debonding failure mode of the latter. The load carrying capacity of CFRP strengthened RC specimens increased ~75% compared to that of the control RC beams. This was attributed to the enhancement of flexural mode of the former. Finally, finite element analysis was also utilized to verify the measured experimental results.

• 인터넷정보학회논문지
• /
• 제23권3호
• /
• pp.13-20
• /
• 2022

차세대 와이파이 표준기술인 IEEE 802.11ay는 밀리미터파 대역에서 AP (Access Point)가 다수의 STA (Station)로 동시에 데이터를 전송하도록 MU-MIMO (Multiple User Multiple Input Multiple Output) 통신을 지원한다. 이를 위해, 주기적으로 MU-MIMO 빔포밍 훈련을 수행해야 하고, 효율적인 빔포밍 훈련을 위해서는 AP가 다수의 안테나로 다수의 빔을 동시에 전송할 때, 각 STA에서 측정되는 신호 세기를 정확히 예측하는 것이 중요하다. 본 논문에서는 딥러닝 기반 다중 빔 전송링크 성능 예측기법을 제안한다. 제안한 예측기법은 특정 실내 또는 실외 환경에서 미리 학습된 딥러닝 모델을 이용하여 다수의 빔이 동시에 전송될 때 STA에서 측정되는 신호 세기 예측의 정확성을 높인다. 이때, 딥러닝의 입력으로 개별 빔이 전송될 때 STA에서 측정되는 신호 세기 정보를 이용하고, 개별 빔의 신호 세기 정보를 얻는 과정은 이미 기존의 빔포밍 훈련에 포함되어 있으므로 정보 수집을 위해 추가적인 비용을 발생하지 않는다. 성능평가를 위해 NIST (National Institute of Standards and Technology)에 의해 개발된 Q-D 채널구현 (Quasi-Deterministic Channel Realization) 오픈소스 소프트웨어를 활용하였고 실측 데이터 기반으로 밀리미터파 채널을 구현하였다. 실험결과에서는 제안한 예측기법이 다른 비교기법보다 향상된 예측성능을 보였다.

• 한국전산구조공학회논문집
• /
• 제16권3호
• /
• pp.251-260
• /
• 2003

원형단면의 깊은 테이퍼봉과 보의 진동수와 모드형상을 결정하는 3차원 해석방법이 제시되었다. 수학적으로 1차원인 전통적인 봉과 보이론과는 달리, 본 연구에서는 3차원 동탄성방정식을 근간으로 하였다. 반경방향(r), 원주방향(θ), 축방향(z)으로의 변위성분인 u/sup r/, u/sub θ/, u/sub z/를 시간에 대해서는 정현적으로, θ에 대해서는 주기적으로, r과 z방향으로는 다수다항식의 형태로 표현하였다. 봉과 보의 위치(변형률)에너지와 운동에너지를 정식화하고, 고유치문제를 해결하기 위해 Ritz법을 사용하였으며, 진동수의 최소화과정을 통해 엄밀해의 상위경계치의 진동수를 구하였다. 이때 다항식의 차수를 증가시키면 진동수는 엄밀해에 수렴하게 된다. 봉과 보의 하위 5개의 진동수에 대해서 유효숫자 4자리까지의 수렴성 연구가 이루어졌다. 축방향으로 1차 직선적, 2차 및 3차 곡선으로 테이퍼된 9가지 형상의 봉과 보의 수치결과를 3차원 이론을 이용하여 최초로 계산하였다. 또한 선형 테이퍼 보의 예를 통해 3차원 Ritz법과 고전적인 1차원 Euler-Bernoulli 보이론과의 비교가 이루어졌다.

• 한국공작기계학회논문집
• /
• 제12권5호
• /
• pp.73-79
• /
• 2003

In this paper, RKPM is extended for solving moderately thick and thin beams. General Timoshenko beam theory is used for formulation. Shear locking is the main difficulty in analysis of these kinds of structures. Shear relaxation factor, which is formulated using the difference between bending and shear strain energy, and corrected shear rigidity are introduced to overcome shear locking. Analysis results obtained reveal that RKPM using introduced methods is free of locking and very effectively applicable to deep beams as well as shallow beams.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1998년도 가을 학술발표논문집(II)
• /
• pp.519-524
• /
• 1998

The shear behavior and reinforcement effects of simply supported reinforced concrete deep beams with web opening subject to concentrated loads have been scrutinized experimentally to verify the effects of structural parameters such as size, location and reinforcements of web opening. A total of 14 specimens were tested at the laboratory under two-point top loading. The shear span ratio was taken constantly 0.8, and various types of reinforcements based on truss models were adopted. In the tests, the effects of loction, reinforcements of web openings on the shear behavior, and crack initiation and propagation have been carefully checked and analyzed.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1994년도 가을 학술발표회 논문집
• /
• pp.273-278
• /
• 1994

The shear behavior of simply supported reinforced concrete deep beams subject to concentrated loads has been scrutinized experimentally to verify the influence of the structural parameters such as shear span ratio, and the horizontal and vertical web reinforcements. A total of 27 specimens has been tested at the laboratory. In the tests all specimens have failed in shear causing inclined cracks from the load application points to the supports. The load bearing capacities have changed significantly depending on the shear span ratio. The effects of the vertical and horizontal reinforcements on the shear strength and crack initiation and propagation have been carefully checked and analyzed.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1999년도 봄 학술발표회 논문집(I)
• /
• pp.665-670
• /
• 1999

The shear behavior and strength of simply supported reinforced concrete deep beams with web opening subject to concentrated loads have been investigated experimentally on the effects of structural parameters such as location of web opening and reinforcements. A total of 12 specimens were tested at the laboratory under two-point top loading. The shear span-to-depth ratio was taken constantly 0.8, and various types of reinforcements based on truss models were adopted. In the tests, the effects of location, reinforcements of web openings on the shear behavior, and crack initiation and propagation have been carefully checked and analyzed. The test results have been compared with the formulas proposed currently being used and analyzed by nonlinear finite element method. Shear strengths obtained from the tests showed good matches with Kong and Ray's equation, and also with the results calculated by nonlinear finite element method.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2000년도 가을 학술발표회 논문집(II)
• /
• pp.885-890
• /
• 2000

12 RC deep beams with a/d = 1.17 are reported. This paper is to study the effect of vertical and horizontal web reinforcement and web reinforcement arrangement on inclined cracking shear, ultimate shear strength, midspan deflection, and inclined crack width. Test results indicated that web reinforcement produces and arrangement seems to moderately affect inclined cracking shear, ultimate shear strength and crack width. However, addition of horizontal web reinforcement(pv = 0.0085) little or no influence on inclined cracking shear, ultimate shear strength and crack width. The member which vertical and horizontal web reinforcement concentrate on the center web considerably increases in load-carrying capacity.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2005년도 봄학술 발표회 논문집(I)
• /
• pp.179-182
• /
• 2005

Recently, many design codes including ACI 318-02 recommend the use of a strut-tie model approach for design of structural concrete with D-region(s). However, there are several unclear problems and shortcomings in the codes' strut-tie model approach. A grid strut-tie model approach was proposed to resolve these problems. In this study, the ultimate strengths of 17 deep beams, the most familiar type of D-regions, were evaluated for the validity check of the grid strut-tie model approach. The analytical results obtained by the approach are compared with those by the strut-tie model approach presented by CEB-FIP, AASHTO LRFD, and ACI 318-02.

• 콘크리트학회지
• /
• 제15권6호
• /
• pp.64-69
• /
• 2003