• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.2
• /
• pp.393-400
• /
• 2015

As the development and distribution of the intelligent transport system is spreading recently and some of the services are commercialized through a pilot project, interest in DSRC with high utilization is increasing and antennas for roadside and on board equipment are being studied. A single patch was used for a vehicle antenna due to the requests of miniaturization of size, but there was performance degradation in most cases due to miniaturization. In addition, some methods to improve performance have been used in the antennas that were previously researched using the arrays, but they have the disadvantages of bulkiness in size of the antennas when using the arrays. Therefore, in this paper, the CPW fed microstrip patch antenna with the simple structure of being compact and easy to produce, which can be used in the OBU of DSRC, was designed.

• Review of Culture and Economy
• /
• v.21 no.1
• /
• pp.63-83
• /
• 2018

In the US, there are no governing bodies within the federal executive departments dedicated to the arts and cultural affairs. Direct government subsidies for the arts are relatively small compared to other countries with a comparable economy and standard of living. Nevertheless, the US produces artworks, artists, and arts groups, leading the world's arts and culture. Incorporating the concepts of network governance and shared governance, this paper examines the dynamic roles and interrelationships among various for-profit/nonprofit arts organizations, foundations, councils, service organizations, arts advocacy groups, and professional/amateur associations from the federal to local levels that compose the ecology of American arts and culture. Through our evaluation, we conclude that the local/state/federal arts agencies and arts organizations at various levels influence each other via the principle of subsidiarity and isomorphism, creating a unique cultural policy and arts-supporting system that correspond to the political and social structure and environment of the United States.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.38 no.4
• /
• pp.177-183
• /
• 2015

Incremental sheet metal forming is a manufacturing process to produce thin parts using sheet metals by a series of small incremental deformation. The process rarely needs dedicated dies and molds, thus, preparation time for the process is relatively short as to be compared to conventional metal forming. Spring back in sheet metal working is very common, which causes critical errors in dimensions. Incremental sheet metal forming is not fully investigated yet. Hence, incremental sheet metal forming frequently produces inaccurate parts. This paper proposes a method to minimize dimensional errors to improve shape accuracy of products manufactured by incremental forming. This study conducts experiments using an exclusive incremental forming machine and the material for these experiments are sheets of aluminum AL1015. This research defines a process parameter and selects a few factors for the experiments. The parameters employed in this paper are tool feed rate, tool diameter, step depth, material thickness, forming method, dies applied, and tool path method. In addition, their levels for each factor are determined. The plan of the experiments is designed using orthogonal array $L_8$ ($2^7$) which requires minimum number of experiments. Based on the measurements, dimensional errors are collected both on the tool contacted surfaces and on the non-contacted surfaces. The distances between the formed surfaces and the CAD models are scanned and recorded using a commercial software product. These collected data are statistically analyzed and ANOVAs (analysis of variances) are drawn up. From the ANOVAs, this paper concludes that the process parameters of tool diameter, forming depth, and forming method are the significant factors to reduce the errors on the tool contacted surface. On the other hand, the experimental factors of forming method and dies applied are the significant factors on the non-contacted surface. However, the negative forming method always produces better accuracy than the positive forming method.

• Journal of the Korea Society of Computer and Information
• /
• v.20 no.1
• /
• pp.137-142
• /
• 2015

In the object inheritance of SR DEVS, partial or overall asset inheritance can be possible. To a asset inherited from parent object, by respective dedicated function a child object can implement partial or whole asset, or not. Even though a child has a inherited asset, if the asset is the hidden property its implementation will not be provided. A inherited asset cannot be showed in whole asset implementation, or it can be implemented by special system state. Here, the whole asset implementation means may include time parameter. In this paper, we describe a determination probability scheme for partial or whole asset inherited from the parent object to determine the hidden inheritance. By the determination probability function it is decided that the inherited asset will be hidden or normal asset.

• Journal of the Korea Society of Computer and Information
• /
• v.18 no.8
• /
• pp.33-41
• /
• 2013

Intelligent automobile technology and IT convergence, the development of new imaging technology media applications based on open source Android installed on tracked, wheeled smart phone application technology and the development of intelligent vehicles as a new paradigm a lot of research and development being made. Android-based intelligent automotive applications, technology, and evolved into the center of a set of various multimedia technologies move beyond the limits of the means of each of multimedia platforms, services and applications that have been developed in such a distributed environment, has been developed according to a variety of services through technology mobile terminal device technology is an absolute requirement. In this paper, SVC Codec, real-time video and graphics processing and SoC design intelligent vehicles middleware applications with monolithic system specification through Android-based design of intelligent vehicles dedicated middleware research experiments on open platforms, and provides various terminal services functions SoC based on a newly designed and standardized interface analysis techniques in this study were verified through experiments.

• Earthquakes and Structures
• /
• v.4 no.6
• /
• pp.587-606
• /
• 2013

The given paper presents a new approach in design of seismic isolation systems of base isolated buildings. The idea is to install not one big size rubber bearing under the columns and/or shear walls, or one by one with certain spacing under the load-bearing walls, but to install a group/cluster of small size bearings, in order to increase the overall effectiveness of the isolation system. The advantages of this approach are listed and illustrated by the examples. Also the results of analyses of some buildings where the approach on installation of clusters of rubber bearings was used in their isolation systems are given for two cases: i) when the analyses are carried out based on the provisions of the Armenian Seismic Code, and ii) when the time history analyses are carried out. Obtained results are compared and discussed. Paper also presents, as an example, detailed analysis and design of the 18-story unique building in one of the residential complexes in Yerevan. Earthquake response analyses of this building were carried out in two versions, i.e. when the building is base isolated and when it is fixed base. Several time histories were used in the analyses. Comparison of the obtained results indicates the high effectiveness of the proposed structural concepts of isolation systems and the need for further improvement of the Seismic Code provisions regarding the values of the reduction factors. A separate section in the paper dedicated to the design of high damping laminated rubber-steel bearings and to results of their tests.

• Journal of Platform Technology
• /
• v.6 no.4
• /
• pp.87-95
• /
• 2018

With the decrease of sequencing price, many national projects that analyzes 0.1 to 1 million people are now in progress. However, large portion of budget of these large projects is dedicated for construction of the cluster system or purchase servers, due to the lack of programs or systems that can handle large amounts of data simultaneously. In this study, we developed NGSOne, a client program that is easy-to-use for even biologists, and performs SNP analysis using hundreds or more of Whole Genome and Whole Exome analysis without construction of their own server or cluster environment. DRAGEN, BWA / GATK, and Isaac / Strelka2, which are representative SNP analysis tools, were selected and DRAGEN showed the best performance in terms of execution time and number of errors. Also, NGSOne can be extended for various analysis tools as well as SNP analysis tools.

• Journal of Climate Change Research
• /
• v.4 no.4
• /
• pp.385-395
• /
• 2013

In this paper, we target to develop weather platform and services to use in smart devices which is in real-time mobility environment. The existing TPEG-based navigation service requires a dedicated terminal, DMB communication method, and service scalability, so there are limits. In this paper, we analyze, processing and storage the real-time weather information suitable for navigation on the end user's smart devices by weather information service platform has been developed that can provide a standardized. In addition, we develop weavigation services and API for the developer to develop weather services easily. And we introduce system for serving information of dangerous district forecast based on natural disaster dangerous district data.

• Journal of Preventive Medicine and Public Health
• /
• v.52 no.5
• /
• pp.323-332
• /
• 2019

Objectives: The aim of this study was to describe general practitioners (GPs)' opinions and practices of preventive care and patients' opinions, attitudes, and behaviors towards prevention. Methods: The data stemmed from a cross-sectional national survey on prevention conducted in Switzerland from 2015 to 2016. In total, 170 randomly drawn GPs and 1154 of their patients participated. The GPs answered an online questionnaire and the patients answered a questionnaire administrated by fieldworkers present at their practices. Results: Both patients and GPs agreed that delivering preventive care is the dedicated role of a GP. It appeared that beyond classical topics of prevention such as cardiovascular risk factors, other prevention areas (e.g., cannabis consumption, immunization, occupational risks) were scarcely covered by GPs and reported as little-known by patients. In addition, GPs seemed to use a selective approach to prevention, responding to the clinical context, rather than a systematic approach to health promotion. The results also highlight possibilities to improve prevention in family medicine through options such as more supportive tools and public advertising, more time and more delegated tasks and, finally, a more recognized role. Conclusions: Despite an unfavorable context of prevention within the healthcare system, preventive care in family medicine is reasonably good in Switzerland. However, some limitations appear regarding the topics and the circumstances of preventive care delivery. A global effort is needed to implement necessary changes, and the responsibility should be broadened to other stakeholders.

• Journal of Contemporary Eastern Asia
• /
• v.18 no.1
• /
• pp.7-29
• /
• 2019

This study describes an approach for comparative bibliometric analysis of scientific publications related to (i) individual or several departments comprising a university, and (ii) broader integrated subject areas using multiple disciplinary schemes. It uses a custom dataset of scientific publications (ca. 15,000 articles and reviews, published during 2009-2013, and recorded in the Web of Science Core Collections) with author affiliations to the research departments, dedicated to science, technology, engineering, mathematics, and medicine (STEMM), of a comprehensive university. The dataset was subjected, at first, to the department level and discipline level analyses using the newly available KAKEN-L3 classification (based on MEXT/JSPS Grants-in-Aid system), hierarchical clustering, correspondence analysis to decipher the major departmental and disciplinary clusters, and visualization of the department-discipline relationships using two-dimensional stacked bar diagrams. The next step involved the creation of subsets covering integrated subject areas and a comparative analysis of departmental contributions to a specific area (medical, health and life science) using several disciplinary schemes: Essential Science Indicators (ESI) 22 research fields, SCOPUS 27 subject areas, OECD Frascati 38 subordinate research fields, and KAKEN-L3 66 subject categories. To illustrate the effective use of the science mapping techniques, the same subset for medical, health and life science area was subjected to network analyses for co-occurrences of keywords, bibliographic coupling of the publication sources, and co-citation of sources in the reference lists. The science mapping approach demonstrates the ways to extract information on the prolific research themes, the most frequently used journals for publishing research findings, and the knowledge base underlying the research activities covered by the publications concerned.