• Journal of Navigation and Port Research
• /
• v.36 no.5
• /
• pp.409-418
• /
• 2012

Amid global economic crisis and skyrocketing oil prices, container shipping companies have raised a sustained series of efforts to reduce vessel operating costs. Under these circumstances, the Grand Alliance has decided to install the dedicated feeder instead of additional vessels in the CCX(Central China Express) and the NCE(North China Express) route. In other words, a vessel in a trunk route is transshiped by a dedicated feeder vessel in Busan port that is a transshipment port, rather than calling at Northen China port. In this study, the actual operating data of Grand Alliance container services were analyzed to determine the economic effect of transshipment through a dedicated feeder service. In this way, the Grand Alliance are saving vessel operating expenses in 'NCE' and 'CCX' routes, making the slow steaming of vessels possible in these trunk routes.

• KIEE International Transactions on Power Engineering
• /
• v.5A no.4
• /
• pp.357-365
• /
• 2005

This research investigates the influences of distributed generations (DG), which are interconnected to the bus by the dedicated lines, on the overcurrent relays (OCR) of the neighboring distribution feeders and also proposes a novel method to reduce the negative effects on the feeder protection. Due to the grid connected DG, the entire short-circuit capacity of the distribution networks increases, which may raise the current of the distribution feeder during normal operations as well as fault conditions. In particular, during the switching period for loop operation, the current level of the distribution feeder can be larger than the pickup value for the fault of the feeder's OCR, thereby causing the OCR to perform a mal-operation. This paper proposes the adaptive setting algorithm for the OCR of the distribution feeders having the neighboring dedicated feeders for the DG to prevent the mal-operations of the OCR under normal conditions. The proposed method changes the pickup value of the OCR by adapting the power output of the DG monitored at the relaying point in the distribution network. We tested the proposed method with the actual distribution network model of the Hoenggye substation at the Korea Electric Power Co., which is composed of five feeders supplying the power to network loads and two dedicated feeders for the wind turbine generators. The simulation results demonstrate that the proposed adaptive protection method could enhance the conventional OCR of the distribution feeders with the neighboring dedicated lines for the DG.

• Journal of Navigation and Port Research
• /
• v.35 no.7
• /
• pp.605-611
• /
• 2011

In this paper, practical problems for current feeder service between Busan port and west coast of Japan were extracted through in depth interviews with Japanese feeder vessel companies, shippers, and port authority based upon which major criteria (elements) for improvement of the feeder network are structured in hierarchic order and weighed relative importance through AHP method. From the questionnaire answered by Korean and Japanese port users and experts the weights of criteria were calculated and the shipping service was ranked the first by both parties with 0.235 and 0.217, respectively. The port service and support system ranked the second and the third, whereas the port marketing was shown to be the lowest of all. Considering the overall weights, the increase in a port loading and unloading speed of port service was followed by provision of dedicated deck for feeder vessel of port facilities for Korean respondents. Therefore, speed up of the port operations and providing docks for feeder vessel are to be firstly provided for more efficient feeder operations, which would be the basis for the construction of optimal transportation network.

• Journal of the Korean Society for Railway
• /
• v.12 no.4
• /
• pp.526-534
• /
• 2009

PRT(Personal Rapid Transit) can be described as a system of driverless taxicabs, that. automatically take passengers to their destinations along dedicated guideways, without intermediate stops.It is ideally suited as a short feeder transportation for on-demand circulation operations at train stations, airports, office complex, amusement park and shopping center. This PRT study do suggest that a PRT system could provide a high level of mobility to the commuters making work trips, workers making work, shopping and other non-work trips, residents making shopping and other non-work trips and recreational riders.This study presents the possibilities of PRT applications in national level. As the technology continues to advance, there may be opportunities to improve the reliability, and efficiency of our future public transportation systems.

• Journal of Embryo Transfer
• /
• v.28 no.1
• /
• pp.1-6
• /
• 2013

A lot of works have been dedicated to clarify the reasons why the establishment of embryonic stem cells (ESCs) from pig is more difficult than that from mouse and human. Several concomitant factors such as culture condition including feeder layer, sensitivity of cell to cell contact, definitive markers of pluripotency for evaluation of the validity and optimal timing of derivation have been suggested as the disturbing factors in the establishment of porcine ESCs Traditionally, attempts to derive stem cells from porcine embryos have depend on protocols established for mouse ESCs using inner cell mass (ICM) for the isolation and culture. And more recently, protocols used for primate ESCs were also applied. However, there is no report for the establishment of porcine ESCs. Indeed, ungulate species including pigs have crucial developmental differences unlike rodents and primates. Here we will review recent studies about issues for establishment of porcine ESCs and discuss the promise and strategies focusing on the timing for derivation and pluripotent state of porcine ESCs.

• Journal of IKEEE
• /
• v.25 no.1
• /
• pp.95-100
• /
• 2021

If we know the location of the hull block and the welding feeder in the shipyard, we can easily obtain the location information of the worker. That data is very useful for implementing a workplace safety monitoring system. However, it is difficult to apply a fixed communication network to the workplace due to the specificity of the hull structure and welding process. In this study, inductive power line communication, which can replace dedicated communication line, was reviewed. A ferrite core was used as an inductive coupler to be installed on the power cable of the welding machine, and a nano-crystalline core was applied as a coupler to be fastened to the support rod of the metal block. In order to visualize the operating principle of the proposed couplers, 3D modeling and finite element analysis were performed with the COMSOL AC/DC module. In the communication performance test using an aluminum profile, when the communication channel was formed by the contact of the welding electrode, the bandwidth was kept above 6 Mbps.

• Journal of Korea Port Economic Association
• /
• v.23 no.1
• /
• pp.115-148
• /
• 2007

Under the influence of ever-globalized world economy, Yangsan Port of Shanghai, a central hub of Chinese economy, was opened up on Dec. 1, 2005 in the expectation of heart of northeast Asian harbor logistics. It has triggered severer competitions among northeast Asian ports. In an effort to keep robust standing as a central port of northeast Asia, Korea has still built additional new ports and opened up 3 docks in Nov. 2005. Amid these changing port environments, it is foremost to take the competitive edges of new ports in advance of major rival ports in the interest of preoccupying the standing of those new ports as the central hub of northeast logistics. According to the developmental strategies of new ports can be summed up as follows: First, it is required to separate port development from marketing as a part of separating developmental entity from management/maintenance entity. Second, it is required to develop dedicated port for feeder vessels along with new ports to save more time and cost spent by shipping companies. Third, the attraction of jumbo shipping companies to port development needs differentiated countermeasures for each shipping company, and those measures should be taken in advance before jumbo shippers decide their own shipping strategies in future. Fourth, in terms of incentives for attracting jumbo shipping companies, it is required to offer the incentives to them in using new ports in connection with Busan ports. Fifth, it is critical to set up a benchmark of competitors(ports) for establishing one-stop automatic administration process system upon developing ports. Finally, it is required to prepare a plan for using rearward lands in connection with ports for more efficient use of development complex behind port.