• Journal of computational fluids engineering
• /
• v.21 no.3
• /
• pp.64-70
• /
• 2016

Multiple solutions in natural convection of water with Pr=7 between two horizontal plates with small magnitude non-uniform temperature distribution in the upper plate is numerically investigated. The dimensionless temperature of upper plate is ${\theta}={\epsilon}sinkx$. Two upright cells are formed over one wave length in the conduction-dominated regime of small Rayleigh number. However, multicellular convection occurs above a critical Rayleigh number for small wave number. When k = 1.5, dual solutions are found and a transition of $6{\rightarrow}4$ eddy flow occurs with decrease of Rayleigh number. When k = 0.75, two, three, four and five multiple solutions are observed. Transitions of $14{\rightarrow}12$, $12{\rightarrow}10$, $10{\rightarrow}8$ and $6{\rightarrow}8$ eddy flow occur with decrease of Rayleigh number.

• Journal of the Korean Society for Heat Treatment
• /
• v.14 no.6
• /
• pp.345-349
• /
• 2001

This study has investigated the effect of thermal stability and mechanical property of $Fe_{80-X}P_{10}C_6B_4M_X$(X=2, 4, 6, M=transition metal) amorphous alloys fabricated by the melt-spun process. The glass transition temperature($T_g$), crystallization temperature($T_x$) and hardness increase with decreasing electron concentration (e/a) from about 7.38 to 7.18. The decrease of e/a implies the increase in the attractive bonding state between the M elements and other constituent element. The decrease in a/e leads to the enhancement of the attractive bonding state among the constituent elements which is favorable for the increase in $T_g$, $T_x$ and hardness.

• Progress in Superconductivity and Cryogenics
• /
• v.4 no.2
• /
• pp.63-67
• /
• 2002

In this study, the performance of the Stirling type orifice Pulse tube refrigerator (OPTR) with a linear compressor was investigated by experiment. The dynamic pressures at three points and a temperature at the cold heat exchanger are measured to explore the dependency of the orifice on the performance of the OPTR. The experimental results show that the opening of the orifice has significant effects on the no load temperature and cool down characteristics. The Pressure amplitude in Pulse tube decrease as the opening of the orifice increase, but the mass flow rate through the orifice and the electric input Power to the compressor increase. The results show that the operating frequency and charging Pressure does not affect on the no load temperature. The pressure amplitude in pulse tube decrease as the operating frequency increase or the charging Pressure decreased.

• Proceedings of the KIEE Conference
• /
• 1998.07e
• /
• pp.1605-1607
• /
• 1998

In this paper, specimens which have the structure of Insulator/Insulator/Insulator and Insulator/Semiconductor /Insulator were experimented using insulating material of Polyethylene Terephthalate(PET). The dependency of permitivity, $tan{\delta}$ and conductance on frequency and temperature were investigated. Both of the specimens showed the trend of decrease in permitivity as the temperature increased but increase as the frequency increased. $tan{\delta}$ of both specimens showed increase with the increase of frequency. With the temperature, $tan{\delta}$ showed slight decrease by $60^{\circ}C$ and increase over $80^{\circ}C$.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.15 no.9
• /
• pp.818-821
• /
• 2002

We investigated the evolution of magnetic property with varying palladium (Pd) contents and elevating substrate temperatures up to 200 $^{\circ}C$ during dc-sputtering. We observed that saturation magnetization (Ms), remanence and anisotropic magnetoresistance (AMR) ratio decrease with Pd contents in the case of keeping the substrate temperature at 3$0^{\circ}C$. However they increase by adding 2 %Pd, then decrease above 3 %Pd when we keep the substrate temperature at 20$0^{\circ}C$. Coercivity does not change with Pd contents. Our results imply that we may tune the Ms and AMR with Pd contents and substrate temperature in permalloy films.

• Proceedings of the KSME Conference
• /
• 2008.11b
• /
• pp.2334-2339
• /
• 2008

This paper proposes an improved mathematical model for predicting the frosting behavior on a two-dimensional fin considering the heat conduction of heat exchanger fins under frosting conditions. The model consists of laminar flow equation in airflow, diffusion equation of water vapor for frost layer, and heat conduction equation in fin, and these are coupled together. In this model, the change in three-dimensional airside airflow caused by frost growth is accounted for. The fin surface temperature increased toward the fin tip due to the fin heat conduction. On the contrary, the temperature gradient in the airflow direction(x-dir.) is small throughout the entire fin. The frost thickness in the direction perpendicular to airflow, i.e. z-dir., decreases exponentially toward the fin tip due to non-uniform temperature distribution. The rate of decrease of heat transfer in the airflow direction is high compared to that in the z-direction due to more decrease in the sensible and latent heat rate in x-direction.

• Journal of Ginseng Research
• /
• v.4 no.1
• /
• pp.72-87
• /
• 1980

Red ginseng tails were extracted with ethanol solutions over a range of concentrations and temperature conditions. Investigations were carried out to study the effects of treatments on yields, soluble solids, saponin and precipitate occured in red ginseng extract beverage during storage. It was found that: (1) Higher concentration of ethanol at low temperature resulted in less yield of crude extract (2) The amount of precipitate in the non-purified extract beverage were less with decrease in ethanol concentration used (3) The treatment for purification of extracts and storage of purified extract at 37$^{\circ}C$ for 6 months had no effect on HPLC chromatogram pattern of saponins (4) The amount of purified extract decreased by purification treatment and more decrease was found as the temperature and concentration of ethanol increased. For Preparation of red ginseng extract beverage, the treatment of extracts with ethanol at low temperature was found to be more effective to minimize precipitation in tile beverage.

• Journal of the Microelectronics and Packaging Society
• /
• v.19 no.2
• /
• pp.73-78
• /
• 2012

The chemical, electrical, and optical properties of ZnO and Al-doped ZnO films after high temperature annealing were studied. The resistivity increased significantly after annealing at $600^{\circ}C$ under $10^{-10}$ Torr atmosphere. The mechanism of the resistivity change was explored using photoemission spectroscopy and photoluminescence spectrometer. The results indicated that the amount of oxygen deficient region O-Zn bonds decreased and oxygen vacancy was decreased after the high temperature vacuum annealing. The increase in the resistivity of ZnO and Al-doped ZnO films was resulted from the decrease in carrier concentration due to a decrease in the amount of oxygen deficiency.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.16 no.5
• /
• pp.438-443
• /
• 2004

The objective of this paper is to study the effects of the input gas flow rate and the ambient temperature variation on the absorption cycle performance. An air-cooled NH$_3$-$H_2O$ absorption chiller is tested in the present study. The nominal cooling capacity of the single effect maching is 17.6 ㎾ (5.0 USRT). The cooling capacity, coefficient of performance, burner efficiency, and each state point are measured with the variations of the heat input and the ambient temperature. It is found that the COP and cooling capacity increase with increasing the generator exit temperature up to a certain temperature and then decrease. It is also found that the COP and the cooling capacity decrease with increasing the ambient temperature. The maximum COP of 0.51 is obtained from the present experiment.

• Atmosphere
• /
• v.29 no.2
• /
• pp.165-181
• /
• 2019

In this study, the regional climate model, RegCM4.0 (25 km), with the HadGEM2-AO data as boundary conditions, was used to simulate the mean climate changes in the mid and late 21st century for CORDEX Phase 2 East Asian region. 122 years (1979~2100) of simulation were performed, and RCP 4.5 and RCP 8.5 were used for the simulation of future climate. In the mid-21st century, the temperature is expected to increase by about 0.5 to $3.0^{\circ}C$ in all regions of East Asia, regardless of season and scenario. The increase in temperature is greater in summer and winter, especially in the northern part of simulation domain. Interannual variability (IAV) is expected to decrease by 25% in summer for RCP 8.5, while it is expected to increase by more than 30% in autumn for both scenarios. Regardless of the scenario, the precipitation in South Korea is expected to increase in late June but decrease in mid-July, with an increase in precipitation greater than $100mm\;day^{-1}$. In RCP 4.5 of the late 21st century, relatively uniform temperature increase ($1.0{\sim}2.5^{\circ}C$) is expected throughout the continent, while RCP 8.5 shows a very diverse increase ($3.0{\sim}6.0^{\circ}C$) depending on season and geographical location. In addition, the IAV of temperature is expected to decrease by more than 35% in both scenarios in the summer. In most of the Northwest Pacific region, precipitation is expected to decrease in all seasons except for the summer, but in South Korea, it is projected to increase by about 10% in all seasons except autumn.