• Journal of the Korea Organic Resources Recycling Association
• /
• v.3 no.2
• /
• pp.59-68
• /
• 1995

Composting facilities are operated with air and moisture control. Composting effects on two operating factors was analysed changing aeration rate with and without water addition to maintain the optimun moisture level. Though the composting facilties are provided with appropriate surroundings for compositing, operating temperature is set for decomposition rate. Accordingly control of decomposition phases was analysed by modeling the process of high and low decomposition phases with various operating temperature. A composting model of "The Library of Compost Engineering Software" developed by Roger T. Haug Inc. in U.S.A. was applied in modeling. As result of this study, operation with optimum moisture has more sensitive temperature to aeration fluctuation and lead to higher reaction rate with lower aeration than operation with poor moisture. Decomposition rate in composting facilities depend on slow decomposition phase because high rate decomposing substances already have been decomposed before entire process is not completed. In order to enhance decomposition rate of organics, effective decomposition in slow decomposition phase needs to be focused.

• Transactions of the Korean hydrogen and new energy society
• /
• v.23 no.1
• /
• pp.1-7
• /
• 2012

This study was performed to develop a low Pt content catalyst as a catalyst for HI decomposition in S-I process. Bimetallic catalysts added various amounts of Pt on a silica supported Ni catalyst were prepared by impregnation method. HI decomposition was carried out using a fixed bed reactor. As a result, Ni-Pt bimetallic catalyst showed enhanced catalytic activity compared with each monometallic catalyst. Deactivation of Ni-Pt catalyst was not observed while deactivation of Ni monometallic catalyst was rapidly occurred in HI decomposition. The HI conversion of Ni-Pt bimetallic catalyst was increased similar to Pt catalyst with increase of the reaction temperature over a temperature range 573K to 773K. From the TG analysis, it was shown that $NiI_2$ remained on the Ni(5.0)-Pt(0.5)/$SiO_2$ catalyst after the HI decomposition reaction was decomposed below 700K. It seems that small amount of Pt in bimetallic catalyst increase the decomposition of $NiI_2$ generated after the decomposition of HI. Consequently, it was considered that the activity of Ni-Pt bimetallic catalyst was kept during the HI decomposition reaction.

• 한국해양학회지
• /
• v.28 no.4
• /
• pp.323-331
• /
• 1993

The concentration-dependence of and the effect of light on urea decomposition, and the suppression of urea decomposition by ammonium were studied to understand adaptations in phytoplankton to utilization of urea in the estuarine system of the Mankyung and Dongjin rivers and a hypertrophied pond. Results of size-fractionation showed that bacterial fraction played a minor role (14%) in urea decomposition in the estuary. However, the role of bacteria in urea decomposition seemed to increase in a hypertrophic pond. Natural phytoplankton communities exhibited a monophonic or biphasic kinetics of urea decomposition over a wide range of concentration (upto 7.7 mM). the addition of high concentration of ammonium and incubation of the euphotic samples in the dark caused reductions in the urea decomposition rates. It is suggested that understanding of adaptations in phytoplankton to urea decomposition would help to study the temporal and spatial variabilities of urea decomposition rates in the field and the significance of urea in nitrogen cycle.

• Transactions of the Korean hydrogen and new energy society
• /
• v.22 no.1
• /
• pp.51-59
• /
• 2011

Sulfur-Iodine (SI) cycle, which thermochemically splits water to hydrogen and oxygen through three stages of Bunsen reaction, HI decomposition, and $H_2SO_4$ decomposition, seems a promising process to produce hydrogen massively. Among them, the decomposition of $H_2SO_4$ ($H_2SO_4=H_2O+SO_2+1/2O_2$) requires high temperature heat over $800^{\circ}C$ such as the heat from concentrated solar energy or a very high temperature gas-cooled nuclear reactor. Because of harsh reaction conditions of high temperature and pressure with extremely corrosive reactants and products, there have been scarce and limited number of data reported on the pressurized $H_2SO_4$ decomposition. This work focuses whether the $H_2SO_4$ decomposition can occur at high pressure in a noble-metal reactor, which possibly resists corrosive acidic chemicals and possesses catalytic activity for the reaction. Decomposition reactions were conducted in a Pt-lined tubular reactor without any other catalytic species at conditions of $800^{\circ}C$ to $900^{\circ}C$ and 0 bar (ambient pressure) to 10 bar with 95 wt% $H_2SO_4$. The Pt-lined reactor was found to endure the corrosive pressurized condition, and its inner surface successfully carried out a catalytic role in decomposing $H_2SO_4$ to $SO_2$ and $O_2$. This preliminary result has proposed the availability of noble metal-lined reactors for the high temperature, high pressure sulfuric acid decomposition.

• Journal of the Korea Safety Management & Science
• /
• v.16 no.2
• /
• pp.237-246
• /
• 2014

Researches on the elimination of sulfur and nitrogen oxides with catalysts and absorbents reported many problems related with elimination efficiency and complex devices. In this study, decomposition efficiency of harmful gases was investigated. It was found that the efficiency rate can be increased by moving the harmful gases together with SPCP reactor and the catalysis reactor. Calcium hydroxide($Ca(OH)_2$), CaO, and $TiO_2$ were used as catalysts. Harmful air polluting gases such as $SO_2$ were measured for the analysis of decomposition efficiency, power consumption, and voltage according to changes to the process variables including frequency, concentration, electrode material, thickness of electrode, number of electrode winding, and additives to obtain optimal process conditions and the highest decomposition efficiency. The standard sample was sulfur oxide($SO_2$). Harmful gases were eliminated by moving them through the plasma generated in the SPCP reactor and the $Ca(OH)_2$ catalysis reactor. The elimination rate and products were analyzed with the gas analyzer (Ecom-AC,Germany), FT-IR(Nicolet, Magna-IR560), and GC-(Shimazu). The results of the experiment conducted to decompose and eliminate the harmful gas $SO_2$ with the $Ca(OH)_2$ catalysis reactor and SPCP reactor show 96% decomposition efficiency at the frequency of 10 kHz. The conductivity of the standard gas increased at the frequencies higher than 20 kHz. There was a partial flow of current along the surface. As a result, the decomposition efficiency decreased. The decomposition efficiency of harmful gas $SO_2$ by the $Ca(OH)_2$ catalysis reactor and SPCP reactor was 96.0% under 300 ppm concentration, 10 kHz frequency, and decomposition power of 20 W. It was 4% higher than the application of the SPCP reactor alone. The highest decomposition efficiency, 98.0% was achieved at the concentration of 100 ppm.

• Resources Recycling
• /
• v.14 no.2
• /
• pp.28-32
• /
• 2005

By using thermal decomposition method, the preliminary experiments for recovery of metallic Ga from GaAs scraps produced in the manufacturing of compound semiconductors were carried out in laboratory(200 g/batch) scales. From these results, decomposition appratus with packed tower was constructed in commercial scale(30 kg/batch). The decomposition rate of GaAs increased with raising decomposition temperature, but the yield of Ga decreased over 1000$^{\circ}C. As a result, the optimum decomposition temperature was 1000~1050$^{\circ}C when the pressure of decomposition reactor was 2~2.5${\times}10^{-2} mmHg, and the yield of Ga was about 89 wt.%. The commercial decomposition apparatus was designed with packed tower because the partial pressure of As in vapor state was not reduced even if the temperature of As vapor was decreased. The recovery yield of Ga from GaAs scraps in large scale experiment showed 99%.

• Journal of Forest and Environmental Science
• /
• v.29 no.1
• /
• pp.38-48
• /
• 2013

Decomposition of plant material is an important component in the study of forest ecosystem because of its critical role in nutrient cycling. Different tree species has different nutrient release patterns, which are related to leaf litter quantitative traits and seasonal environmental factors. The quantitative traits of leaf litter are important predictors of decomposition and decomposition rates increase with greater nutrient availability in the forest ecosystems. At the ecosystem level, litter quantitative traits are most often related to the physical and chemical characteristics of the litter, for example, leaf toughness and leaf mass per unit area, and lignin content tannin and total phenolics. Thus, the analysis of litter quantitative traits and decomposition are highly important for the understanding of nutrient cycling in forest ecosystems. By studying the role of litter quantitative traits on decomposition and nutrient cycling in forest ecosystems will provide a valuable insight to how quantitative traits influence ecosystem nutrient dynamics. Such knowledge will contribute to future forest management and conservation practices.

• Journal of Environmental Science International
• /
• v.22 no.1
• /
• pp.83-89
• /
• 2013

Silicon carbide with aluminium oxide was used to remove the sulphur hexafluoride ($SF_6$) gas using microwave irradiation. The destruction and removal efficiencies (DREs) of $SF_6$ were studies as a function of various decomposition temperatures and microwave powers. The decomposition of $SF_6$ gas was analyzed using GC-TCD. XRD (X-ray powder diffraction) and XRF (X-ray Fluorescence Spectrometer) were used to characterize the properties of aluminum oxide. DREs of $SF_6$ were increased as the microwave powers were increased. Additive aluminium oxide on SiC increased the removal efficiencies and decreased the decomposition temperature. The XRD results show that the ${\gamma}-Al_2O_3$ was transformed to ${\alpha}-Al_2O_3$ during $SF_6$ decomposition by microwave irradiation. It was found that the best material to control $SF_6$ was SiC with $Al_2O_3$ 30 wt% in consideration of microwave energy consumption and $SF_6$ decomposition rate.

• Journal of the Korean Society of Industry Convergence
• /
• v.6 no.4
• /
• pp.269-275
• /
• 2003

A non-thermal plasma process combined with $Cr_2O_3/TiO_2$ catalyst was applied to the decomposition of trichloroethylene (TCE). A dielectric barrier discharge reactor operated with AC high voltage was used as the non-thermal plasma reactor. The effects of reaction temperature and input power on the decomposition of TCE and the formation of byproducts including HCl, $Cl_2$, CO, NO, $NO_2$ and $O_3$ were examined. At an identical input power, the increase in the reaction temperature from 373 K to 473 K decreased the decomposition of TCE in the plasma reactor. The presence of the catalyst downstream the plasma reactor not only enhanced the decomposition of TCE but also affected the distribution of byproducts, significantly. However, synergistic effect as a result of the combination of non-thermal plasma with catalyst was not observed, i.e., the TCE decomposition efficiency in this plasma-catalyst combination system was almost similar to the sum of those obtained with each process.

• Journal of the Korean Wood Science and Technology
• /
• v.29 no.3
• /
• pp.59-67
• /
• 2001

Rice husk flours were analyzed by chemical composition and thermogravimetric methods in nitrogen atmosphere to discuss its feasibility as a raw material for manufacturing agricultural lignocellulosic fiber-thermoplastic polymer composite. It was revealed in the chemical composition analysis that rice husk flour was composed of moisture, 5.0%; lignin, 21.6%; holocellulose, 60.8%; ash, 12.6%. In the thermogravimetric analysis (TGA), thermal decomposition behavior of rice husk flour from room temperature to $350^{\circ}C$ was similar to that of wood flour, but rice husk flour was more thermally stable from 350 to $800^{\circ}C$ than wood flour because of higher silica content in the rice husk flour and smaller particle size of rice husk flour. The activation energy of thermal decomposition was evaluated using Flynn & Wall expression. As the thermal decomposition proceeded in rice husk flour, the activation energy of thermal decomposition appeared almost constant up to ${\alpha}=0.25$, but thereafter increased. Activation energy of thermal decomposition in wood flour, however, decreased steeply up to ${\alpha}=0.3$, but thereafter remained almost constant. From the results, rice husk flour was thought be a substitute for wood flour in manufacturing agricultural lignocellulosic fiber-thermoplastic polymer composite in the aspect of thermal decomposition.