• 한국산학기술학회논문지
• /
• 제16권6호
• /
• pp.3680-3684
• /
• 2015

조선소에서 데크 크레인은 지상에 설치된 타워 크레인이나 해상 크레인을 사용하여 리프팅 설치 방법에 의해 선박에 탑재된다. 데크 크레인의 두 점 리프팅 설치 작업 시에는 임시 고정 지그 등을 사용하는데, 안전한 리프팅 작업을 위해서는 고정 지그의 형상 및 설치 위치를 고려한 리프팅 안전성 평가가 선행되어야 한다. 본 연구에서는 데크 크레인 및 고정 지그에 해당하는 유한요소해석 모델을 각각 생성하고, 리프팅 반력 및 경계 조건을 적용한 구조 해석을 수행하여 리프팅 설치 작업에 대한 안전성을 평가하였다. 본 연구에서 제시한 안전성 평가 방법은 다양한 데크 크레인의 리프팅 설치 작업 시에 보다 안전한 리프팅 작업 가이드를 제공할 수 있는 해석적 툴로 활용될 수 있다.

• 한국기계가공학회지
• /
• 제11권1호
• /
• pp.95-100
• /
• 2012

A deck crane is installed on the deck of a ship when there is no adequate facility for loading and unloading in dock or harbor. Deck cranes in Korea have been imported from abroad, and the import-substitution effect will arise if its production can be localized. Now, it is required to suggest the structural design of a deck crane that meet the domestic criterion, considering loading condition. In this study, the structural analysis of a pedestal in the deck crane was peformed by finite element method to investigate the strength requirement. In addition, the structural design of a pedestal was suggested by using ANSYS and VisualDOC. The optimized structure of a pedestal was determined, considering lightweight design.

• 한국기계연구소 소보
• /
• 통권16호
• /
• pp.127-136
• /
• 1986

Recently deck crane of multi purpose cargo vessel (MPCV) is designed to posi¬tion in side instead of in the center line of the upper deck with a view to reduce the transportation cost and shipbuilding cost by shortening the length of ship. In this paper, the crane post was at first designed according to the crane maker’s specification and parent ship and the structure is analysed with Finite Ele¬ment Method. Through the careful reviews on the result of analysis, the final design of crane post was modified. The crane post is designed as a cylindrical in upper part and hexagonal in lower part instead of cylindrical on the whole as before. The connecting part of crane post is designed with the form of mixture of the cylinderical and hexagonal. Since the center of cylindrical and hexagonal section are not on the same line, it is expected to have the stress concentration. So, in order to attenuate the concentrated stress on the connecting part, the upper and lower parts was stiffened by inserting plate to enlarge the area of welding. The structure of deck part includes the tank side floor which is depend on the lower structure of the crane post that would support the force of the crane post by placing with 1.5 frame interval of the vertical plate.

• 대한기계학회논문집A
• /
• 제33권4호
• /
• pp.396-400
• /
• 2009

The demand of JIB crane to handle a container or a bulk in a vessel is increasingly because of the growth of the scale of trade through the sea. This deck crane such as JIB crane is required the weight reduction design because it is installed in the deck of a vessel due to the environment regulation. In this study first we carry out the structural analysis of JIB with respect to the luffing angle of it to calculate the maximum equivalent stress of JIB, and next the optimum design for the weight reduction design of JIB. The thickness in a cross section of JIB is adopted as the design variable, the weight of JIB as the objective function, and the von mises stress as the constraint condition for the optimum design of JIB using the ANSYS 10.0.

• Tribology and Lubricants
• /
• 제28권3호
• /
• pp.112-116
• /
• 2012

wet-type multiple disk brakes are very important parts of turning decelerator for deck crane, because they are advanced in durability and braking power, and can be designed compactly. Thus, we designed and made wet-type multiple disk brakes of turning decelerator for deck crane to be localization of these imported all. In this study, wet multiple disk brakes were made a comparative test with the 2 types materials of friction disk by the SAE No.2 dynamometer. The friction characteristics were measured and analyzed to decide a suitable material as wear depth of friction disk and dynamic and static friction coefficient.

• 대한조선학회논문집
• /
• 제59권4호
• /
• pp.225-234
• /
• 2022

The flow field measurement above whole area of the flight deck on 'Landing Platform Helicopter (LPH)' was performed by using PIV system in wind tunnel. In various heading angle conditions (0deg, -30deg, -45deg, -60deg, -75deg and ±90deg), the velocity fields such as U velocity & V velocity were measured at three different height above flight deck. Due to the geometrical characteristics of several bodies like deck, crane and super-structure, various vortex were generated. When the heading angle is 0deg, the deck edge vortex by flight deck and massive separation by super-structure were clearly observed by visualization with smoke and PIV, respectively. In other heading angles, the acceleration of flow in space between crane and super-structure were detected. And area with flow separation by super-structure is directly related to the heading angle of vessel.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2004년도 춘계학술대회논문집
• /
• pp.433-437
• /
• 2004

A provision crane is generally installed on the upper deck to the rear of the accommodation of the ship in order to load and unload engine part or something heavy. There are two types of provision cranes: one is jib-type and the other is monorail-type. So the natural frequency of the jib-type crane equipment is low, therefore, there are some possibility of resonance between crane structure and the main excitation sources of the ship in normal operating range. This study describe a vibration reduction technique for provision crane by applying a proper countermeasure through finite element analysis and modal test. In order to find out weak point in design of provision crane, a sensitive analysis has been performed.

• 대한조선학회논문집
• /
• 제48권4호
• /
• pp.342-345
• /
• 2011

Drillship has several large cranes to handle the various equipments for drilling work. These cranes are supported by crane pedestals which are installed on main deck. Two major loads, i.e., hull girder bending moment and crane operation loading shall be considered to confirm the structural strength in way of crane pedestal. In this paper, the fatigue analysis is performed for the structures in way of crane pedestal considering two(2) loads as mentioned in the above is introduced.

• 한국시뮬레이션학회논문지
• /
• 제19권1호
• /
• pp.13-22
• /
• 2010

본 논문에서는 해상 크레인이 인양하는 중량물의 운동 감쇠를 위하여 Tagline을 이용한 PD제어를 수행하였다. 해상 크레인 및 중량물을 각각 6자유도 운동을 하는 강체로 가정하고 뉴턴의 제 2법칙에 따라 운동 방정식을 유도하였다. 중량물의 운동을 감쇠하기 위한 제어 메커니즘으로 Tagline을 사용 하였고, 해상 크레인의 Deck에 설치한 Winch로 Tagline의 장력을 조절하였다. 장력을 조절하는 제어 알고리즘으로는 PD제어를 사용 하였다. 이를 바탕으로 수치적 제어 시뮬레이션을 수행하였다. 또한, 1/100 Scale의 모형 해상 크레인을 제작하고 실험을 통해 제어 시뮬레이션의 결과를 검증 하였다. 제어 시뮬레이션과 모형 시험 수행 결과 Tagline을 이용한 제어가 중량물의 운동을 감쇠시키는데 효과가 있음을 알 수 있었다.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2008년도 정기 학술대회
• /
• pp.178-183
• /
• 2008

A robot crane truck is being developed by the Bridge Inspection Robot Development Interface(BRIDI) for an automated and/or teleoperated bridge inspection. At the end of the telescoping boom allows the operator to scan the bridge structure under the deck trough the camera. Boom vibration induced by wind and deck movement can cause serious problems in this scanning system. This paper presents a control system to mitigate such vibration of the robot boom In the proposed control system an actuator is installed at the end of the working boom. This control system is studied using a mathematical model analysis with LQ control algorithm and a scaled model test in the laboratory. The study indicates that the proposed system is efficient for the vibration control of the robot booms, thereby demonstrating its immediate applicability in the field.