• 제어로봇시스템학회논문지
• /
• 제17권10호
• /
• pp.1029-1036
• /
• 2011

An energy-efficient reference walking trajectory generation algorithm is suggested utilizing allowable ZMP (Zero-Moment-Point) region, which maxmizes the energy efficiency for cyclic gaits, based on three-dimensional LIPM (Linear Inverted Pendulum Model) for biped robots. As observed in natural human walking, variable ZMP manipulation is suggested, in which ZMP moves within the allowable region to reduce the joint stress (i.e., rapid acceleration and deceleration of body), and hence to reduce the consumed energy. In addition, opimization of footstep planning is conducted to decide the optimal step-length and body height for a given forward mean velocity to minimize a suitable energy performance - amount of energy required to carry a unit weight a unit distance. In this planning, in order to ensure physically realizable walking trajectory, we also considered geometrical constraints, ZMP stability condition, friction constraint, and yawing moment constraint. Simulations are performed with a 12-DOF 3D biped robot model to verify the effectiveness of the proposed method.

• International Journal of Automotive Technology
• /
• 제8권2호
• /
• pp.185-191
• /
• 2007

The new FMVSS 208, 213, 225 regulations include automatic suppression of airbags to prevent low-risk airbag deployment and the use of child seats with a rigid-bar anchor system. The regulations mean that children must sit in the rear seat, but do not include other specific safety measures for their protection. In the rear, restraint equipment consists of three-point shoulder/lap belts for the outside seats and a static two-point lap belt in the middle, with no additional devices such as pretensioners or load limiters; this is far from optimal for children. This study investigated injury rates using a 3-year-old-child dummy. ECE R44 sled tests used a booster, a speed of 48 km/h, and a 26- to 32-g rectangular deceleration pulse. While seated on a booster, the dummies were restrained by an adult shoulder/lap three-point belt. HIC_15 msec, Chest G and Nij were somewhat lower with an emergency locking retractor (ELR)+pretensioner+load limiter than with only an ELR or with ELR+pretensioner. However, the current seat-belt system results in injury rates that exceed the limit for OOP performance under the new FMVSS 208 regulations.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1992년도 한국자동제어학술회의논문집(국내학술편); KOEX, Seoul; 19-21 Oct. 1992
• /
• pp.537-540
• /
• 1992

This paper presents Samsung CNC (Computer Numerical Controller) system with an intel 80486/487 as the main CPU and a 32 bit floating point DSP(Digital Signal Processor) TMS320C30 as the motion control CPU. The Samsung CNC system diverse user-frienly characteristics such as multi-tasking, powerful menu system, internal PLC system, and 2/3 dimensional graphics in wire and solid mode. The main CPU executes central processing program, user interface program, interpreter, BMI, etc while the motion control CPU carries out some interpolations, acceleration/deceleration, and PID control algorithm with feedforward terms. Complex interpolations except linear and circular ones are performed on the main control CPU. The experimental results for the circular interpolation under linear acceleration/deceleration shows that the proposed CNC system can be widely used in controlling machining centers with good machining accuracy.

• 한국항행학회논문지
• /
• 제10권4호
• /
• pp.319-326
• /
• 2006

본 논문에서는 연료 유량만을 제어 입력으로 하는 터보제트 엔진 제어기를 제안한다. 퍼지 기반 제어기는 무인 항공기의 가감속시 서지와 flame-out 현상이 발생되지 않도록 효율적으로 제어 입력을 생성하며, 항공기 기동시 빠른 가감속 특성을 보이며, 동작점이 서지라인과 flame-out라인 사이에 존재하도록 설계되었다. 엔진 회전 속도와 서지 여유가 퍼지 입력 변수가 되고, 신속하고 안전하게 항공기가 원하는 회전속도로 수렴할 수 있도록 제어기를 설계한다. 제안된 제어기의 성능확인을 위해 MATLAB을 사용한 컴퓨터 시뮬레이션을 수행하였으며, DYGABCD 프로그램을 사용하여 생성된 선형 엔진 모델에 적용하여 성능을 입증하였다.

• 대한토목학회논문집
• /
• 제37권2호
• /
• pp.397-407
• /
• 2017

본 연구는 고속도로 졸음쉼터 현황 조사 및 문제점 도출을 통해 졸음쉼터의 제원 산정 및 설계기준 수립을 위한 개선안 제시를 목적으로 한다. 고속도로 졸음쉼터 진입부를 감속변이구간, 감속차로, 진입연결로로 분류하고, 진출부는 진출연결로, 가속차로, 가속변이구간으로 분류하여 차량의 본선 주행속도, 진출입연결로의 시 종점부 주행속도, 감속도 및 가속도 등을 고려하여 구간별 적정길이를 산정하였다. 또한 졸음쉼터 주차부를 주차형태, 횡단구성 주차공간의 길이 등으로 구분하고, 실제 졸음쉼터를 이용하는 차량의 이용률, 중차량 비율, 졸음쉼터 내 설계속도 등을 고려하여 합리적인 설계기준을 정립하였다. 본 연구를 통해 제시된 고속도로 졸음쉼터 설계기준은 향후 졸음쉼터 계획 및 재정비 시 유용하게 활용될 수 있을 것으로 판단된다. 또한, 고속도로 졸음쉼터의 규정 및 산정 결과를 고려한 졸음쉼터의 설치기준 정립은 휴게시설 및 고속도로 교통사고 예방은 물론 이용률 증가 및 안전성 측면의 향상을 가져올 것으로 판단된다.

• 한국산학기술학회논문지
• /
• 제22권6호
• /
• pp.591-598
• /
• 2021

도시철도 열차의 요구 사항 중 하나가 정위치 정차 성능이다. 이는 열차가 승강장의 지정된 위치에 정확히 정차할 수 있도록 하는 것이며 정위치 정차를 만족시키지 못할 경우 스크린도어와의 간섭이 발생하여 승객 불편 및 운행 지연을 초래한다. 자동운전 열차의 경우 열차의 현재 속도 정보를 가지고 현재의 위치를 파악한 후 이에 맞게 가감속 명령을 내려 제어를 수행하므로 속도 정보의 오차가 클 경우 정확한 제어가 불가능하게 된다. 도시철도에서는 위치 오차를 보정하기 위해 PSM(Precision Stop Marker)가 있어 특정 지점에서 위치 오차를 보정하여 정차제어의 오차를 줄이도록 한다. 그러나 PSM 자체는 위치정보만 가지고 있으므로 속도 오차에 대한 보정은 수행하지 않는다. 본 논문에서는 PSM 경과 정보를 가지고 속도를 추정하여 정위치 정차제어를 수행하는 방안에 대하여 제안한다. 등감속도로 열차를 운행하면 속도를 추정할 수 있고 이에 따라 목표 감속도를 구하여 정차제어를 수행할 수 있다. 수치적 시뮬레이션을 통해 제안한 방안의 실현 가능성과 우수성을 보인다.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제52권12호
• /
• pp.616-623
• /
• 2003

Conventional P/PI speed controller of today's servo drives should be manually tuned the controller switching set-point by trial-and-errors, which may translate the drive system down-time and loss of productivity. The adjustable drive performance is heavily dependent on the quality of the expert knowledge and becomes inadequate in applications where the operating conditions change in a wide range, i.e., tracking command, acceleration/deceleration time, and load disturbances. In this paper, the demands on simple controls/setup are discussed for industry servo drives. Analyzing the frequency content of motor torque command, P/PI control mode switching is automatically performed with some prior knowledge of the mechanical dynamics. The dynamic performance of the proposed scheme assures a desired tracking response curve with minimal oscillation and settling time over the whole operating conditions. For comprehensive comparison of traditional P/PI control scheme, extensive test is carried out on actual servo system.

• 대한인간공학회:학술대회논문집
• /
• 대한인간공학회 1997년도 춘계학술대회논문집
• /
• pp.107-113
• /
• 1997

In this paper, an interfacing method to control rehabilitation assitance system with bio-signal is proposed. Controlling with EMG signals method has certain advantage on signal-collecting, but has some drawbacks in the function resolution of EMG signals because data-processing process is not efficient. To improve function-resolution and to increase the efficiency of EMG signal interfacing with rehabilitation assistance system, Multi-layer Perception which is highly effective with static signal and hidden-Markov model for dynamic signal resolving are fused together. In proposed method. The direction and average speed of the rehabilitation assitance system are controlled by the trajectory control and estimation of the moving direction result from the fused model. From the experiment, proposed GMM and 2-level MLP hybrid-classifier yielded 8.6% perception-error rate, improving function resolution. New acceleration control method constructed with 3 nested linear filter produced continuous acceleration paths without the information of destination point. Thus, the mass output caused by non- continuous acceleration-deceleration was eliminated. In the simulation, the necessary calculation, in the case of multiplication, was reduced by 11.54%.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2002년도 전력전자학술대회 논문집
• /
• pp.281-284
• /
• 2002

This paper describes the initial angle adjustment method on Hall Sensorless Linear Permanent Magnet Synchronous Motor The implementation of the controller is designed on the DSP TMS320C32 board. PMLSM is operated by using 4-point absolute positions profile with each velocity, acceleration and deceleration. To achieve Hall Sensorless characteristics, Moving Coil Type PMLSM is used and initial angle adjustment algorithm is adapted.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 A
• /
• pp.421-423
• /
• 1999

The function of the automatic train operation(ATO) system is to regulate the train ride comfort during start, acceleration and deceleration and execute operation of constant speed travelling and fixed point parking. The mathematical model for the train is presented by considering unknown disturbances which consist of start resistance, travelling resistance, slope resistance, curve resistance and so on. The speed control of ATO system is designed by considering the disturbances. The simulation is executed to verify the speed control performance and compare its performance with that of a PID-type ATO control system under the disturbances. Simulation results show that the control performance of gain scheduled control for ATO system is better than that of the conventional PID controller.