• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2008년도 춘계 학술발표회 초청강연 및 논문집
• /
• pp.273-280
• /
• 2008

Debris flow has been considered as one of the major natural hazards and possesses tens to hundreds times higher destructive potential than that of slope failure. In the past 5 years, its occurrence frequency was and is likely to increasing due to the global warming. Although various methods such as basin vegetation or structural dams can be implemented to counter measure the debris flow, these methods are not always the right answer to the problem when magnitude of debris flow is far bigger than could be defended. Land use regulations to avoid the hazard or early debris flow warning system to evacuate the expected inundated area can be more economical and practical actions for those cases. In this study, an early debris flow warning system composed of rainfall measuring device, debris flow sensing device and video camera is introduced. The system is designed to issue the warning when rainfall threshold is exceeded or debris flow is sensed by sensing device. Developed monitoring system can be used to cope promptly with the debris flow risk.

• 한국산림과학회지
• /
• 제106권4호
• /
• pp.424-430
• /
• 2017

토석류는 빠른 속도와 넓은 퇴적 범위 등으로 인명 및 재산 피해를 야기하는 산지토사재해이다. 토석류 피해 저감을 목적으로 효과적인 사방 구조물을 설계하기 위해서는 토석류의 충격력을 정확하게 산정하여야 한다. 토석류의 유동속도는 토석류 충격력을 추정하는데 중요한 요인이다. 따라서 이 연구에서는 소형 수로실험을 통해 수로경사 및 시료 조건에 따른 토석류의 유동특성을 실험적으로 분석하고, 토석류 유동속도 추정식의 유동저항계수를 추정하였다. 유동속도는 수로의 경사조건 및 시료의 점성조건에 유의한 변화를 보였다. 유동깊이는 수로경사에 대해서 유의한 차이를 보였으나 시료의 점성변화에 대해서는 유의한 변화를 보이지 않았다. 유동저항계수를 계산하여 분석한 결과, Voellmy flow 모형의 Chezy 상수($C_1$)가 상대적으로 수로실험 결과를 잘 재현하였다. 또한, 실제 토석류 사례와의 비교 결과, 유동깊이에 관계없이 일정한 값($20.19m^{-1/2}\;s^{-1}$)을 보였다. 따라서, $C_1$은 다양한 발생규모의 토석류에 대한 유동속도 추정에 잘 활용될 수 있을 것으로 보인다.

• 한국안전학회지
• /
• 제33권4호
• /
• pp.84-89
• /
• 2018

The number of landslides has increased since the 2000s due to the increased frequency of heavy rainfall caused by abnormal weather. A variety of debris flow prevention facilities have been installed as a countermeasure against this problem. However, it is not easy to evaluate the efficiency of debris flow prevention structures except for the structures with constant volume such as the erosion dam, because the other structures are limited to be reproduced in simulation program for debris flow. Therefore, the methods by which the debris flow prevention structures were modeled were proposed, and the efficiency of four prevention structures installed in Baekyang Mt. in Busan was evaluated with UDS, which accuracy had been verified, using these methods. The initial amount of debris flow was determined based on landslide which occurred in 2014, and specifications of the complex retaining walls around the settlements were measured and applied modeling for terrain. The numerical results showed that the efficiency of debris flow prevention structures could be quantitatively presented. Among the debris flow prevention structures installed in Baekyang Mt., prevention structure of barrier type for debris flow was the most efficiency and debris flow prevention device was the lowest efficiency when the only depth of debris was evaluated. It seems that this study is meaningful to propose the methods which were used to model the debris flow prevention structures that could not be reproduced in most 2D debris flow numerical analysis programs. If precise verification of the presented methods is carried out, it will be possible to provide clear criteria for the efficiency evaluation method of disaster prevention structures.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2009년도 춘계 학술발표회
• /
• pp.1100-1106
• /
• 2009

A debris flow is known as that flood and landslide of water cause much physical human damages worldwide to complex natural disaster that happen combining and happy event is happening mainly in urgent mountains area in domestic. Because happen about debris flow that happen from each place every year and is drift, mechanism of accumulation definitely make clear and great many damage is not running out. Must grasp actual conditions of priority debris flow to need debris flow prevention countermeasure and lay countermeasure to take away damage by debris flow. Because collecting actual conditions of debris flow that happen by objective investigation methods and accuracy, proposed about investigation calamity investigation method so that can calculate debris flow damage and prepare in subsequentness damage.

• 한국측량학회지
• /
• 제33권6호
• /
• pp.507-516
• /
• 2015

Debris flow is a representative natural disaster in Korea and occurs frequently every year. Recently, it has caused considerable damage to property and considerable loss of life in both mountainous and urban regions. Therefore, It is necessary to estimate the scope of damage for a large area in order to predict the debris flow. A response model such as the random walk model(RWM) can be used as a useful tool instead of a physics-based numerical model. RWM is a probability model that simplifies both debris flows and sedimentation characteristics as a factor of slopes for a subjective site and represents a relatively simple calculation method compared to other debris flow behavior calculation models. Although RWM can be used to analyzing and predicting the scope of damage caused by a debris flow, input variables for terrain conditions are yet to be determined. In this study, optimal input variables were estimated using DEM generated from the Aerial Photograph and LiDAR data of Mt. Umyeon, Seoul, where a large-scale debris flow occurred in 2011. Further, the deposition volume resulting from the debris flow was predicted using the input variables for a specific area in which the deposition volume could not be calculated because of work restoration and the passage of time even though a debris flow occurred there. The accuracy of the model was verified by comparing the result of predicting the deposition volume in the debris flow with the result obtained from a debris flow behavior analysis model, Debris 2D.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2010년도 춘계 학술발표회
• /
• pp.883-890
• /
• 2010

This study is a research results about flow characteristics of debris flow mobilized from landslides such as initiation, transportation and deposition. As results of slope stability analyses at sites studied, the safety factors in rainy period are decreased drastically in comparisons with those in dry period so that the effect of rainfall on initiation of debris flow is known to be significant. From results of analyzing rainfall data, debris flow occurred as previous rainfall accumulated during 2 weeks was more than 526mm, the maximum rainfall intensity being more than 34mm/hr and the day rainfall being more than 171mm/day. As results of analyzing topology of channel debris flow running, the angle of slope where debris flow initiated was in the range of $36{\sim}39^{\circ}$. For area of channel debris flow being transporting the angle of channel was in the range of $11{\sim}36^{\circ}$. The angle of channel where debris flow started to be deposited was found to be in the range of $5{\sim}10^{\circ}$.

• 한국안전학회지
• /
• 제33권1호
• /
• pp.128-134
• /
• 2018

With the increase in frequency of typhoons and heavy rains following the climate change, the scale of damage from the calamities in the mountainous areas has been growing larger and larger, which is different from the past. For the case of Korea where 64% of land is consisted of the mountainous areas, establishment of the check dams has been drastically increased after 2000 in order to reduce the damages from the debris flow. However, due to the lack of data on scale, location and kind of check dams established for reducing the damages in debris flow, the measures to prevent damages based on experience and subjective basis have to be relied on. Under this study, the high-precision DEM data was structured by using the terrestrial LiDAR in the Jecheon area where the debris flow damage occurred in July 2009. And, from the numerical models of the debris flow, Kanako-2D that is available to reflect the erosion and deposition action was applied to install the erosion control facilities (water channel, check dam) and analyzed the effect of reducing the debris flow shown in the downstream.After installing the erosion control facilities, most of debris flow moves along the water channel to reduce the area to expand the debris flow, and after installing the check dam, the flow depth and flux of the debris flow were reduced along with the erosion. However, as a result of analyzing the diffusion area, flow depth, erosion and deposition volume of the debris flow generated from the deposition part after modifying the location of the check dams with the damages occurring on private residences and agricultural land located on the upstream area, the highest reduction effect was shown when the check dam is installed in the maximal discharge points.

• 한국콘텐츠학회:학술대회논문집
• /
• 한국콘텐츠학회 2016년도 춘계 종합학술대회 논문집
• /
• pp.241-242
• /
• 2016

Recent abnormal climate change induces localized heavy rainfall and extreme disasters such as debris flow near urban area. Thus many researches have been conducted to estimate and prevent, especially in focus of physical behavior of debris flow. Even though it is hardly to consider overall related parameters to estimate the extent and degree of directly or indirectly damages due to debris flow. Those analytic restraint would be caused by the diversity and complexity of regional topographic and hydrodynamic characteristics of debris flow inside. We have utilized the Bayesian method to compensate the uncertainty due to the complex characteristics of it after analyzing the numerical results from FLO-2D and field measurement data. Revised values by field measurements will enhance the numerical results and the missing parameters during numerical simulation will be supplemented with this methodology. As a final outcome in this study, the risk index of debris flow damage will be suggested to provide quantitative estimation in terms of hazard protection including the impact on buildings, especially in inner and outer of urban area.

• 대한공간정보학회지
• /
• 제24권3호
• /
• pp.59-66
• /
• 2016

2011년 발생한 서울시 우면산의 토석류는 과거 산간지역 피해와는 달리 도심지역에서 큰 피해가 발생하였다. 따라서 산사태 및 토석류는 산악지역과 도심지역에 관계없이 다양한 지역에서 빠른 속도로 발생하여 엄청난 피해를 유발시키기 때문에 많은 연구자들은 토석류의 영향범위를 예측하고 피해를 최소화하기 위해 노력하고 있다. 토석류의 영향범위 예측을 위한 가장 핵심적인 부분은 복잡한 3차원 지형에서의 토석류 거동 및 퇴적 메커니즘을 이해하여야 한다. 그리고 퇴적 메커니즘을 이해하기 위해서는 토석류의 거동에 따른 에너지량과 침식량이 산정되어야 한다. 하지만 기존에 개발된 토석류 모델들은 토석류의 침식량을 산정하는데 한계가 있었다. 따라서 본 연구에서는 2011년 도심지의 대규모 토석류가 발생한 서울시 우면산 지역을 대상으로 항공사진, 항공 LiDAR 자료로부터 생성된 토석류 피해 전과 후의 DEM을 활용하여 토석류의 피해규모를 산정하였으며, 에너지 이론을 기반으로 하여 침식량을 산정할 수 있는 토석류 거동 해석 모델을 개발하여 비교하였다. 또한 동일지역에 대하여 기존의 토석류 모델(RWM, Debris 2D)도 함께 시뮬레이션 하여 종합적으로 토석류 지역을 비교 분석하였다.

• 지질공학
• /
• 제20권3호
• /
• pp.231-242
• /
• 2010

이 연구는 Liu and Huang (2006)이 개발한 DEBRIS-2D 프로그램을 이용하여 한국의 자연사면을 대상으로 토석류 거동모사의 적용성을 평가하기 위하여 수행하였다. 세립질 및 조립질 물질이 혼재한 대규모 토석류를 모사하기 위해 DEBRIS-2D는 Julien and Lan (1991)이 제안한 구성식을 이용하여 개발되었다. DEBRIS-2D의 이론을 바탕으로 이 연구는 2006년 7월 16일 강원도 인제군 덕산리에서 대규모 토석류 산사태가 발생한 계곡을 모사대상지역으로 선택하였다. 거동 모사 결과, 토사 물질은 산사태 발생 10분 후에 이미 계곡으로 모두 유입되었다. 10분 후 토석류는 계곡부의 첫 번째 변곡점 지점인 개활지에 이르렀으며, 이로 인해 토석류의 속도가 감소하고 흐름 방향이 변하였다. 그 후 토석류는 다시 가속도가 붙어 약 40분 후에 계곡 하류의 마을인근에 이르렀다. 토석류의 최대 속도는 1 m/sec에서 2 m/sec 정도로 비교적 느리고, 토석류의 깊이변화는 계곡의 형태에 많은 영향을 받음을 알 수 있다. 거동모사 결과는 산사태 발생당시 현장의 상황과 매우 유사하게 나타났다. 이는 DEBRIS-2D 프로그램이 알고리즘을 크게 수정하지 않고도 한국의 지질 및 지형조건에 어느 정도 적용 가능함을 의미한다. 그러나, 더욱 신뢰도 높은 토석류 거동모사를 위해서는 국내 지질 및 지형에 대한 최적의 속성값을 결정할 필요가 있다.