• Title/Summary/Keyword: Debris flow

Search Result 439, Processing Time 0.031 seconds

Sliding Wear Properties of Graphite as Sealing Materials for Cut off Hot Gas (고온차단 기밀용 그라파이트의 고온 미끄럼마모 특성 평가)

  • Kim, YeonWook;Kim, JaeHoon;Yang, HoYeong;Park, SungHan;Lee, HwanKyu;Kim, BumKeun;Lee, SeungBum;Kwak, JaeSu
    • Transactions of the Korean Society of Mechanical Engineers A
    • /
    • v.37 no.11
    • /
    • pp.1349-1354
    • /
    • 2013
  • Sealing structure to prevent flowing hot gas into the driving device, located between the driving shaft and the liner of On-Off valve for controlling the hot gas flow path was studied. Wear occurs due to the constant movement of the driving shaft controlled by actuator on graphite as the sealing material. In this paper, the dynamic wear behavior in high temperature of graphite(HK-6) to be used as sealing material was evaluated. Reciprocating wear test was carried out for the graphite(HK-6) to the relative motion between shaft materials(W-25Re). The results of friction coefficient and specific wear rate according to contact load, sliding speed at room temperature and $485^{\circ}C$ considering the actual operating environment were evaluated. Through the SEM analysis of the worn surface, third body as lubricant films were observed and lubricant effect of third body was considered.

Safety Analysis of Storm Sewer Using Probability of Failure and Multiple Failure Mode (파괴확률과 다중파괴유형을 이용한 우수관의 안전성 분석)

  • Kwon, Hyuk-Jae;Lee, Cheol-Eung
    • Journal of Korea Water Resources Association
    • /
    • v.43 no.11
    • /
    • pp.967-976
    • /
    • 2010
  • AFDA (Approximate Full Distribution Approach) model of FORM (First-Order Reliability Model) which can quantitatively calculate the probability that storm sewer reach to performance limit state was developed in this study. It was defined as a failure if amount of inflow exceed the capacity of storm sewer. Manning's equation and rational equation were used to determine the capacity and inflow of reliability function. Furthermore, statistical characteristics and distribution for the random variables were analyzed as a reliability analysis. It was found that the statistical distribution for annual maximum rainfall intensity of 10 cities in Korea is matched well with Gumbel distribution. Reliability model developed in this study was applied to Y shaped storm sewer system to calculate the probability that storm sewer may exceed the performance limit state. Probability of failure according to diameter was calculated using Manning's equation. Especially, probability of failure of storm sewer in Mungyeong and Daejeon was calculated using rainfall intensity of 50-year return period. It was found that probability of failure can be significantly increased if diameter is decreased below the original diameter. Therefore, cleaning the debris in sewer pipes to maintain the original pipe diameter should be one of the best ways to reduce the probability of failure of storm sewer. In sewer system, two sewer pipes can flow into one sewer pipe. For this case, probability of system failure was calculated using multiple failure mode. Reliability model developed in this study can be applied to design, maintenance, management, and control of storm sewer system.

Shear-Rate Dependent Ring-Shear Characteristics of the Waste Materials of the Imgi Mine in Busan (부산 임기광산 광미의 전단속도에 따른 링 전단특성 연구)

  • Jeong, Sueng-Won;Ji, Sang-Woo;Yim, Gil-Jae
    • Journal of the Korean Geotechnical Society
    • /
    • v.30 no.7
    • /
    • pp.5-15
    • /
    • 2014
  • Abandoned mine deposits are exposed to various physico-chemical geo-environmental hazards and disasters, such as acid mine drainage, water contamination, erosion, and landslides. This paper presents the ring shear characteristics of waste materials. The ring shear box with a rotatable O-ring was used in this study. Three tests were performed: (i) Shear stress-time relationship for given normal stress and shear speed, (ii) shear stress as a function of shear speed, and (iii) shear stress as a function of normal stress. For a given normal stress (50 kPa) and speed (0.1 mm/sec), the materials tested exhibit a strain softening behavior, regardless of drainage condition. The peak and residual shear stresses were determined for each normal stress and shear speed. The shear stress was measured when shear speed is equal to 0.01, 0.1, 1, 10, 50, 100 mm/sec or when normal stress is equal to 20, 40, 60, 80, 100, 150 kPa. From the test results, we found that the shear stress increases with increasing shear speed. The shear stress also increases with increasing normal stress. However, different types of shearing mode were observed in drained and undrained conditions. Under drained condition, particle crushing was observed from the shearing zone to the bottom of lower ring. Under undrained condition, particle crushing was observed only at the shearing zone, which has approximately 1 cm thick. It means that a significant high shear speed under undrained condition can result in increased landslide hazard.

Analysis of Characteristics of Landslide Susceptibility in Rugged Mountain Range in the Korean National Park (산악형 국립공원지역의 산사태 발생과 취약지역 특성 분석)

  • Lee, Sung-Jae;Lee, Eun-Jai;Ma, Ho-Seop
    • Journal of Korean Society of Forest Science
    • /
    • v.108 no.4
    • /
    • pp.552-561
    • /
    • 2019
  • In korea, debris-flow disasters are induced by typhoon and localized torrential rainfall annually. These disasters are particularly severe in the Korean national park due to its geomorphological characteristics. This study was conducted to analyze the landslide characteristics and forest environmental factors of landslide areas located in rugged mountain range in the Korean national park (Mt. Seorak, Mt. Jiri, and Mt. Sobaek). Overall, landslides occurred at 474 sites. The average area of the landslide scar among these sites was 1,212 ㎡. The average landslide sediment was 1,389 ㎥, average landslide length was 75 m, and the average width was 12.9 m. The landslides frequently occurred in regions with igneous rock and coniferous forest. In addition, slope gradient degree (31°-40°), slope gradient direction (N), vertical slope (concave), cross slope (concave), altitude (401-800 m), position (middle), stream order (first order), forest type (mixed), parent rock (igneous), and soil depth (<46 cm). The relationship between landslide soil volume and environmental factors showed positive correlation. The variables of vertical slope (complex), altitude (<1,201 m), and soil depth (<46 cm) correlated significantly at 1 % level.

Application of Deconvolution Methods to Improve Seismic Resolution and Recognition of Sedimentary Facies Containing Gas Hydrates (동해 가스하이드레이트 퇴적상 해석 및 분해능 향상을 위한 디컨볼루션 연구)

  • Yi, Bo-Yeon;Lee, Gwang-Hoon;Kim, Han-Joon;Jeong, Gap-Sik;Yoo, Dong-Geun;Ryu, Byoung-Jae;Kang, Nyeon-Keon
    • Geophysics and Geophysical Exploration
    • /
    • v.13 no.4
    • /
    • pp.323-329
    • /
    • 2010
  • Three deconvolution methods were applied to stacked seismic data obtained to investigate gas-hydrates in the Ulleung Basin, East Sea: (1) minimum-phase spiking deconvolution, (2) minimum-phase spiking deconvolution using an averaged wavelet from all traces, and (3) deterministic deconvolution using a wavelet with phases computed from well-logs. We analyzed the resolving property of these methods for lithological boundaries. The first deconvolution method increases temporal resolution but decreases lateral continuity. The second method shows, in an overall sense, similar results to the spiking deconvolution using a minimum phase wavelet for each trace; however, it results in a more consistent and continuous bottom-simulating reflector (BSR) and better resolved sub-BSR reflectors. The results from the third method reveal more detailed internal structures of debris-flow deposits and increased continuity of reflectors; in addition, the seafloor reflection and the BSR appear to have changed to a zero-phase waveform. These properties help more precisely estimate the distribution and reserves of gas hydrates in the exploration area by improving analysis of facies and amplitude of the BSR.

Seasonal Ground Water Table Changes Following Forest Harvesting in Small Headwater Riparian Areas (산지계류 수변지역에서 산림벌채 후 지하수위의 계절 변화)

  • Choi, Byoung-Koo
    • Korean Journal of Environment and Ecology
    • /
    • v.26 no.4
    • /
    • pp.620-628
    • /
    • 2012
  • This study addressed the influence of forest harvesting on seasonal water table dynamics in small headwater riparian areas. Four treatments including potential Best Management Practices(BMPs) for ephemeral and intermittent streams were implemented(BMP1, BMP2, clearcut and reference). Water table measurements were obtained at bi-monthly intervals for 3 years including one year of pre- and two years of post-harvest observations. Overall, water table responses affected largely by rainfall amount. In addition, significant increases in water table levels following harvesting occurred throughout the two post-harvest years. Water table levels increased up to 28.2cm in the clearcut treatment during 2008 and up to 54.2cm in BMP2 during 2009. However, increase in water table elevation was not directly related to basal area removal despite considerable differences in basal area removed between BMP2 and clearcut treatments. Water table rises were apparent in that water table were more elevated during dry season(June through November) than during wet season(December through May). These seasonal fluctuations were presumably driven by changes in evapotranspiration caused by differences in leaf area of overstory canopy and understory following harvest.

Morphometric Characteristics of Alluvial Fans in South Korea and Comparisons with those of Japan, Taiwan and the Philippines (한반도 남부 선상지의 계량적 지형 특성과 일본, 타이완, 필리핀 선상지와의 비교 연구)

  • Yoon, Soon-Ock;Saito, Kyoji;Hwang, Sang-Ill;Oguchi, Takashi;Tanaka, Yukiya
    • Journal of the Korean Geographical Society
    • /
    • v.45 no.4
    • /
    • pp.431-443
    • /
    • 2010
  • The morphometric characteristics of 13 alluvial fans in the southern parts of the Korean Peninsula are studied and relationships between their distributions and causes are discussed by comparing them with 690 alluvial fans in Japan, Taiwan and the Philippines. The relationships between the surface gradient of alluvial fans and source basin area, the surface gradient and the relief ratio of the source basin, and the source basin area and the relief ratio were investigated. The alluvial fans in South Korea have typical characteristics of the Asian fans, although their frequency and density are relatively low, and the size and the relief ratio of their source basins are relatively small and steep, respectively. Moreover 36 major Korean river basins without alluvial fans tend to have lower altitude and relief ratios. Contrary to the argument by Blair and McPherson, the natural depositional gaps on the gradient of alluvial fans were not found. The Gyeongju alluvial fan is probably a fluvial fan with gentle gradient, whereas the other Korean fans seem to be debris-flow related on the base of their gradients.

A Case Study on Analysis of Landslide Potential and Triggering Time at Inje Area using a RTI Warning Model (RTI 경보모델을 이용한 강원도 인제지역의 산사태 가능성 및 발생시간 분석 사례 연구)

  • Chae, Byung-Gon;Liu, Ko-Fei;Cho, Yang-Chan
    • The Journal of Engineering Geology
    • /
    • v.18 no.2
    • /
    • pp.191-196
    • /
    • 2008
  • This study is a case study for application of the RTI warning model to Korea which was previously developed to predict landslide potential and occurrence time during a rainfall event. The rainfall triggering index (RTI) is defined as the product of the rainfall intensity I (mm/hr) and the effective accumulated rainfall $R_t$ (mm). This index is used to evaluate the landslide and debris-flow occurrence potential at time t during a rainfall event. The upper critical value ($RTI_{UC}$) of RTI and the lower critical value ($RTI_{LC}$) of RTI can be determined by historical rainfall data of a certain area. When the rainfall intensity exceeds the upper critical value, there are high potential to occur land-slides. The analysis result can predict landslide occurrence time of an area during a rainfall event as well as land-slide potential. The result can also be used as an important data to issue early-warning of landslides. In order to apply the RTI warning model to Korea this study analyzed rainfall data and landslides data in Inje county, Gangwon province, Korea from July 13 to July 19, 2006. According to the analysis result, the rainfall intensity exceeded the upper critical value 23 hours ago, 11 hours ago, and 9 hours ago from 11:00 in the morning, July 16. Therefore, landslide warnings would be issued three times for people evacuation for avoiding or reducing hurts and dam-ages from landslides in mountainous areas of Inje.

Slope Stability Assessment Induced by Variation in Mountain Topography and Rainfall Infiltration (산지지형 및 강우 침투양상 변화에 따른 산지사면 안정성 평가)

  • Kim, Man-Il;Lee, Seung-woo;Kim, Byung-Sik
    • The Journal of Engineering Geology
    • /
    • v.27 no.2
    • /
    • pp.125-132
    • /
    • 2017
  • Approximately 64 percent of Korean territory is covered with mountains, and there is occurred a continuous mountain disaster such as landslide, debris flow and slope failure around mountain slopes due to heavy rainfall and typhoon in the summer season. Even in such a reality, the development of mountain areas is being carried out through the development and expansion of social infrastructures centered on mountain areas, but systematic management is insufficient. Constructions of a forest road facility for mountain slopes can be a cause of mountain disasters intensively in the summer season due to artificially changing the mountain area. In this unstable mountain environment, efforts to build a disaster-resistant environment are urgently needed. This research is to analyze the stability of mountain slopes according to soil depth (1~5 m) and mountain slope ($20{\sim}60^{\circ}$) considering the characteristics of rainfall infiltration under extreme rainfall conditions. As a result, the stability of the mountain slope was found to be different according to the depth of soils and the saturation area of the soil layer. As well as the stability of the mountain area was found to be lower than that of the natural mountain area. Specially, rainfall infiltration occurs at the upper slope of the forest road. For this reason, the runoff phenomenon of rainfall infiltration water occurs clearly when the depth of soil layer is low.

Analysis and Improvement for Manual to Protect Mountain Disaster in Urban Area (도심지 토사재해 예방을 위한 기존 매뉴얼 분석과 개선 방안)

  • Song, Byungwoong;Baek, Woohyun;Yoon, Junghwan;Sim, Oubae
    • Journal of the Korean GEO-environmental Society
    • /
    • v.16 no.7
    • /
    • pp.43-53
    • /
    • 2015
  • More than 70 percent of the Korean territory consists of mountain area so development of mountain district is essential to urbanize continuously. Thus, technological developments for risk factors and standards and manuals must be needed to prevent mountain disaster. Risk Management Manual should be made and operated in government legislation related to national disaster, but there is still no Emergency Management Standard Manual and Emergency Response-Practical Manual to prevent mountain disaster. This study suggests the improvement plans that are legislated but not established cleary in the field of disaster in urban area. The main items are like as 1) adaptable standard and practical manual to prevent mountain disaster in urban area, 2) reinforcement between managing department and interagency vertically and horizontally in central and local government organization, 3) Personal SOP (Standard Operating Procedure) not EOP (Emergency Operation Plan), 4) considering 13 items selected by Ministry of Public Safety and Security, 5) schematization with personal action plan, 6) check list to do in the event of mountain disaster, and 7) regular practice per quarter.