• 해양환경안전학회지
• /
• 제18권5호
• /
• pp.455-460
• /
• 2012

이 연구에서는 정사각 단면을 갖는 덕트 내부에 원심력의 영향을 받는 유동의 천이특성을 실험 및 수치적으로 규명하였다. 실험적 연구로서 레이저도플러 속도계를 이용하여 축방향속도를 측정하였고, 상용소프트웨어인 플루언트를 이용한 전산유체 시뮬레이션으로 천이특성을 고찰하였다. 유동의 발달은 딘수와 굽힘각에 의존한다는 사실을 알 수 있었으며 덕트의 중앙에서의 속도분포는 원심력 때문에 내외벽보다 낮은 값을 나타내었다.

• 한국해안·해양공학회논문집
• /
• 제20권1호
• /
• pp.101-109
• /
• 2008

현재까지 제안된 해빈 종단면 변형 모델은 공통적으로 폭풍으로 인한 해빈침식과 연안 사주의 형성에 대해서는 비교적 잘 모의 할 수 있었으나 폭풍 후 퇴적작용에 의한 정상 해빈으로의 복구 과정은 잘 모의하지 못하고 있다. 본 연구에서는 이와 같은 한계를 극복하고자 쇄파에 의해 부유된 모래를 천수 Dean상수를 이용해 재분배하는 메카니즘을 적용한 새로운 수치모델을 제안하였다. 수치모의 결과를 미육군공병단과 일본 중앙전력연구소에서 실시한 LWT (Large Wave Tank) 실험과 비교하여 정확성을 검증하였다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집E
• /
• pp.398-403
• /
• 2001

Pressure drop at a helical square duct orifice is numerically evaluated. The orifice is installed at the entrance of a once-through steam generator tube to suppress flow instabilities. The calculated results are compared with the available experimental correlations, and showed good agreement. Effects of curvature ratio and characteristics of the secondary flow with Reynolds number are reported. Through the numerical simulations, pressure drop mechanisms were well understood inside the compact and complicated orifice geometry.

• 한국해안해양공학회지
• /
• 제7권1호
• /
• pp.57-69
• /
• 1995

폭풍해일에 의한 쇄파대내에서의 표사이동을 예측할 수 있는 유한차분 수치모형을 개발하였다. 이동 경계조건을 가지는 비제차 확산방정식을 사용하여 개발된 수치모형은 Kriebel과 Dean(1985)의 수치모형이 가지고 있는 많은 제약성을 해결할 수 있었다. 임의의 초기단면과, 시간에 따른 폭풍해일의 스펙트럼을 이용하여 계산된 수치모형의 결과는 표사량의 보존 및 해안선이 후퇴나 쇄파점의 이동을 잘 나타내 주며, 해석해 및 관측자료 그리고 실험자료와 매우 잘 일치한다. 수치모형과 관련된 제반 변수들의 민감도를 분석하여 수치모형 적용의 편의를 도모하였으며, 해안선 단면을 따른 표사의 입경변화 효과를 부여할 수 있음을 알았다.

• 대한기계학회논문집B
• /
• 제26권6호
• /
• pp.842-849
• /
• 2002

The present study showed that a quantitative analogy of the fully developed laminar flows inorthogonally rotating rectangular ducts and stationary curved rectangular ducts of arbitrary aspect ratio could be established. In order to clarify the similarity of the two flows, the dimensionless parameters $K_{LR}$ =Re/√Ro and Rossby number Ro= $w_{m}$/$\Omega$d in a rotating strait duct were used as a set corresponding to Dean number $K_{LC}$ =Re/√λand curvature ratio λ=R/d in a stationary curved duct. Under the condition that the value of Rossby number and curvature ratio was large enough, the flow field satisfied the ‘asymptotic invariance property’: there were strong quantitative similarities between the two flows such as friction factors, flow patterns, and maximum axial velocity magnitudes for the same values of $K_{LR}$ and $K_{LC}$ .

• Journal of the Korean Statistical Society
• /
• 제23권2호
• /
• pp.513-522
• /
• 1994

A multi-dimensional design is most easily constructed via the amalgamation of one-dimensional component block designs. However, not all sets of component designs are compatible to be amalgamated. The conditions for compatibility are related to the concept of a complete matching in a graph. In this paper, we give sufficient conditions for unequal-replicate designs. Two types of conditions are proposed; one is based on the number of verices adjacent to at least one vertex and the other is ona a degree of vertex, in a bipartite graph. The former is an extension of the sufficient conditions of equal-replicate designs given by Dean an Lewis (1988).

• Journal of Multimedia Information System
• /
• 제5권1호
• /
• pp.15-20
• /
• 2018

There are a lot of problems in the face detection area. One of them is detecting faces by facial features and reducing number of the false negatives and positions. This paper is directed to solve this problem by the proposed triangle method. Also, this paper explans cascades, Haar-like features, AdaBoost, HOG. We propose a scheme using 12-net, 24-net, 48-net to scan images and improve efficiency. Using triangle method for frontal pose, B and B1 methods for other poses in neural networks are proposed.

• 제어로봇시스템학회논문지
• /
• 제13권7호
• /
• pp.656-663
• /
• 2007

A new dynamic balancing algorithm has been proposed to minimize the number of sensors necessary for the horizontal balancing of the mobile inverted pendulum while maintaining the same level of the commercial performance. The inverted pendulum technique is getting attention and there have been many researches on the Segway since the US inventor Dean Kamen commercialized. One of the major problems of the Segway is that many sensors are required for the control of the Segway, which results in the high price. In this research, a single gyro and a tilt sensor are fused to obtain the absolute tilt information, which is applied for the control of the mobile inverted pendulum. A dynamic balancing technique has been developed and applied for a robust control system against disturbances. The intelligent handling and stable curving of the Segway as a next generation mobile tool are verified with a human loading.

• 산업기술연구
• /
• 제19권
• /
• pp.261-268
• /
• 1999

It is a main object to find out the effect of curvature of pipe on the thermal flow field in copper pipe. the toroidal coordinate system is chosen for this project. 3-D numerical works are done by a commercial code, PHOENICS. The flow and temperature field are simulated and analysed on the view point of variation of pressure and temperature with Dean number. The results show that the strong recirculation phenomena and secondary flow are established and then a lot of pressure drop along main flow direction occurs at the curved portion of pipe and the temperature variation has a reversed trend of pressure variation along the axis of pipe.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 추계학술대회
• /
• pp.436-441
• /
• 2003

The present study investigates heat/mass transfer characteristics in rotating two-pass ducts of three different aspect ratios with 90-ribbed surfaces. The results show that the flows generated by the 180-turn, rib turbulators, and duct rotation. The curvature of the 180-turn produces Dean vortices causing high heat/mass transfer in the turning region and in the upstream region of the second-pass. The rib turbulators disturb the main flow by producing reattachment and separation near the ribbed surfaces, and increase heat/mass transfer in the region between the ribs. As the rotation number increases, the heat/mass transfer discrepancy between the leading and the trailing surfaces become larger.