References
- Baura, S. N., 1954, 'Secondary Flow in a Rotating Straight Pipe,' Proc. R. Soc. Lond., A 227, pp. 133-139 https://doi.org/10.1098/rspa.1954.0285
- Benton, G. S., 1956, 'The Effect of the Earth's Rotation on Laminar Flow in Pipes,' J. Appl. Mech., Vol. 23, pp. 123-127
- Speziale, C. G., 1983, 'Numerical Study of Viscous Flow in Rotating Rectangular Ducts,' J. Fluid Mech., Vol. 122, pp. 251-271 https://doi.org/10.1017/S0022112082002201
- Kheshgi, H. S. and Scriven, L. E., 1985, 'Viscous Flow through a Rotating Square Channel,' Phys. Fluids, Vol. 28, pp. 2868-2979 https://doi.org/10.1063/1.865136
- Hart, J. E., 1971, 'Instability and Secondary Motion in a Rotating Channel Flow,' J. Fluid Mech., Vol. 45, pp. 341-353 https://doi.org/10.1017/S0022112071000077
- Yang, W. J., Fann, S. and Kim, J. H., 1994, 'Heat and Fluid Flow inside Rotating Channels,' Appl. Mech. Review, Vol. 47, pp. 367-396 https://doi.org/10.1115/1.3111084
- Dean, W. R., 1927, 'Note on the Motion of Fluid in a Curved Pipe,' Phil. Mag., Vol. 4, pp. 208-223 https://doi.org/10.1080/14786440708564324
- Humphrey, J. A. C., Taylor, A. M. K. and Whitelaw, J. H., 1977, 'Laminar Flow in a Square Duct of Strong Curvature,' J. Fluid Mech., Vol. 83, pp. 509-527 https://doi.org/10.1017/S0022112077001311
- Winters, K. H., 1987, 'A Bifurcation Study of Laminar Flow in a Curved Tube of Rectangular Cross-section,' J. Fluid Mech., Vol. 180, pp. 343-369 https://doi.org/10.1017/S0022112087001848
- Berger, S. A., Tabolt, L. and Yao, L.-S., 1983, 'Flow in Curved Pipes,' Ann. Rev. Fluid Mech., Vol. 15, pp. 461-512 https://doi.org/10.1146/annurev.fl.15.010183.002333
- 이공희, 백제현, 2000, '수직축을 중심으로 회전하는 직관과 정지한 곡관내에서의 층류 유동의 유사성비교,' 대학기계학회논문집(B), 제24권 제12호, pp. 1683-1691
- Lee, G. H. and Baek, J. H., 2001, 'Similarity Comparison of Laminar Flows between in Orthogonally Rotating Square Duct and Stationary Curved Sqare Duct,' Int. J. Rotating Machinery (in Press)
- Trefethen, L. M., 1957, 'Flow in Rotating Radial Ducts,' General Electric Report, No. 55GL350-A
- Ishigaki, H., 1994, 'Analogy between Laminar Flows in Curved Pipes and Orthogonally Rotating Pipes,' J. Fluid Mech., Vol. 268, pp. 133-145 https://doi.org/10.1017/S0022112094001291
- Ito H., 1959, 'Friction Factors for Turbulent Flow in Curved Pipes,' J. Basic Eng., Vol. 81, pp. 123-134
- Austin, L. R. and Seader, J. D., 1973, 'Fully Developed Viscous Flow in Coiled Circular Pipes,' AlChE J., Vol. 19, pp. 85-93 https://doi.org/10.1002/aic.690190113
- Cheng, K. C. and Akiyama, M., 1970, 'Laminar Forced Convection Heat Transfer in Curved Rectangular Channels,' Int. J. Heat Mass Transfer, Vol. 13, pp. 471-490 https://doi.org/10.1016/0017-9310(70)90144-4
- Cheng, K. C. Lin, R. C. and Ou, J. W., 1976, 'Fully Developed Laminar Flow in Curved Rectangular Channels,' J. Fluids Eng., Vol. 98, pp. 41-48 https://doi.org/10.1115/1.3448205
- Ghia, K. N. and Sokhey, J. S., 1977, 'Laminar Incompressible Viscous Flow in Curved Ducts of Regular Cross-Sections,' J. Fluids Eng., Vol. 99, pp. 640-648 https://doi.org/10.1115/1.3448875
- Thangam, S. and Hur, N., 1990, 'Laminar Secondary Flows in Curved Rectangular Ducts,' J. Fluid Mech., Vol. 217, pp. 421-440 https://doi.org/10.1017/S0022112090000787