• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1986년도 한국자동제어학술회의논문집; 한국과학기술대학, 충남; 17-18 Oct. 1986
• /
• pp.658-662
• /
• 1986

In the microcomputer-based velocity control for an electro-hydraulic servo system, the effects of control methods and control hardware on the performance of the system were investigated. Experiments were carried out with PID and deadbeat controllers using 8 or 16 bit microprocessor and 8 or 12 bit A/D and D/A converters. It is found that the transient response of the system is better with PID controller than with deadbeat controller. When the number of bits of the microprocessor and converters are small, it is also found that amplitude quantization due to limited wordlength gives significant effects on transient responses of the system. Analytically predicted step-responses are in good agreement with experimental ones.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2002년도 ICCAS
• /
• pp.45.5-45
• /
• 2002

In this paper, a quasi-deadbeat minimax estimation (QME) is proposed as a new class of time-domain parameter estimations for deterministic generic linear models. Linearity, quasi-deadbeat property, FIR structure, and independency of the initial parameter information will be required in advance, in addition to a new performance criterion of a worst case gain between the disturbances and the current estimation error. The proposed QME is obtained in a closed form by directly solving an optimization problem. The QME is represented in both a batch form and an iterative form. A fast algorithm for the suggested estimation is also presented, which is remarkable in view...

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1992년도 한국자동제어학술회의논문집(국내학술편); KOEX, Seoul; 19-21 Oct. 1992
• /
• pp.182-187
• /
• 1992

This paper proposes a method by which the estimated values of the unknown parameters of system are converged to the true values in finite time using adaptive deadbeat controller. After those are converged to the true values, the deviation from these values do not virtually exist or, if any, extremely small. Also we apply this technique of deadbeat convergence to a system contaminated with white noise or colored noise. It is shown that the estimated parameters of those systems approach the true values in finite time even though the performance do not match perfectly with the system without noises.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 B
• /
• pp.1056-1058
• /
• 2000

Deadbeat technique has been proposed as a digital controller for an UPS inverter to achieve the fast response to a load variation and to conserve a very low THD under a nonlinear load condition. This scheme contains a fatal drawback, sensitivity against parameter variation and calculation time delay. This paper proposes a second order deadbeat current controller, which fundamentally solves the calculation time delay problem and certainly guarantees the robustness of the parameter's variation. This is shown theoretically and practically through simulation and experiment.

• 융합신호처리학회 학술대회논문집
• /
• 한국신호처리시스템학회 2003년도 하계학술대회 논문집
• /
• pp.141-144
• /
• 2003

This paper proposes a design method of a CDBC(Continuous-time Deadbeat Controller)system that takes into account the response between the sampling instant and using second-order smoothing elements. The continuous deadbeat controller is composed of a serial integral compensator and a local feedback compensator introduced into the state feedback loop. A DC servo motor is chosen for implementing CDBC algorithm. Especially according to the variable input and disturbance, corresponding CDBC design method is suggested. A Matlab Simulink is used for simulation with the Motor parameter. By computer simulations, control inputs and system outputs are shown to have desirable property such as smoothness.

• 융합신호처리학회논문지
• /
• 제3권1호
• /
• pp.67-73
• /
• 2002

본 논문은 2차 평활요소를 사용한 최적 연속계 유한정정 서보시스템의 새로운 설계법을 제시한다. 직렬 적분 보상기와 지역 귀환보상기를 상태귀환 루프에 도입하여 연속유한정정제어기를 만든다. 평활요소의 감쇄비와 고유 각주파 수의 결정법을 서술한다. 입출력 특성이 어떻게 개선되는지를 수치예제를 통하여 보인다. 특히 임의의 시간에 인가되는 외란 및 가변 입력에 대한 CDBC를 설계하는 방법을 제시한다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1996년도 한국자동제어학술회의논문집(국내학술편); 포항공과대학교, 포항; 24-26 Oct. 1996
• /
• pp.980-983
• /
• 1996

A new version of the discrete-time optimal FIR (finite impulse response) filter utilizing only the measurements of finite sliding estimation window is suggested for linear time-invariant state-space models. This filter is called the BLUFIR (best linear unbiased finite impulse response) filter since it provides the BLUE (best linear unbiased estimate) of the state obtained from the measurements of the estimation window. It is shown that the BLUFIR filter has the deadbeat property when there are no noises in the estimation window.

• 전기학회논문지
• /
• 제67권11호
• /
• pp.1423-1433
• /
• 2018

Recently, a permanent magnet synchronous motor of middle and small-capacity has high torque, high precision control and acceleration / deceleration characteristics. But existing control has several problems that include unpredictable disturbances and parameter changes in the high accuracy and rigidity control industry or nonlinear dynamic characteristics not considered in the driving part. In addition, in the drive method for the control of low-vibration and high-precision, the process of connecting the permanent magnet synchronous motor and the load may cause the response characteristic of the system to become very unstable, to cause vibration, and to overload the system. In order to solve these problems, various studies such as adaptive control, optimal control, robust control and artificial neural network have been actively conducted. In this paper, an incremental encoder of the permanent magnet synchronous motor is used to detect the position of the rotor. And the position of the detected rotor is used for low vibration and high precision position control. As the controller, we propose augmented state feedback control with a speed observer and first order deadbeat disturbance observer. The augmented state feedback controller performs control that the position of the rotor reaches the reference position quickly and precisely. The addition of the speed observer to this augmented state feedback controller compensates for the drop in speed response characteristics by using the previously calculated speed value for the control. The first order deadbeat disturbance observer performs control to reduce the vibration of the motor by compensating for the vibrating component or disturbance that the mechanism has. Since the deadbeat disturbance observer has a characteristic of being vulnerable to noise, it is supplemented by moving average filter method to reduce the influence of the noise. Thus, the new controller with the first order deadbeat disturbance observer can perform more robustness and precise the position control for the influence of large inertial load and natural frequency. The simulation stability and efficiency has been obtained through C language and Matlab Simulink. In addition, the experiment of actual 2.5[kW] permanent magnet synchronous motor was verified.

• 전력전자학회논문지
• /
• 제11권1호
• /
• pp.38-45
• /
• 2006

본 논문은 유도기의 정밀위치제어를 얻고자 외란 변화에 대하여 정밀위치 제어를 할 수 있는 외란 관측기를 적용하였다. 제안된 알고리즘은 외란 변화에 대한 유도전동기의 정밀 제어에 강인함을 보이고 있다. 모든 게인의 튜닝은 디지털 제어 이론에 입각하여 이산 영역에서 구하였다. 또 시뮬레이션은 시뮬링크를 사용하여 그 구성을 매우 간편하게 하였다. DS1102 보드를 이용한 유도기 정밀위치 제어 결과는 제안된 시스템의 유용성을 보인다.

• KIEE International Transaction on Electrical Machinery and Energy Conversion Systems
• /
• 제2B권4호
• /
• pp.174-182
• /
• 2002

This paper presents a comprehensive study on reducing commutation torque ripples generated in brushless DC motor drives with only a single do-link current sensor provided. In such drives, commutation torque ripple suppression techniques that are practically effective in low speed as well as high speed regions are scarcely found. The commutation compensation technique proposed here is based on a strategy that the current slopes of the incoming and the outgoing phases during the commutation interval can be equalized by a proper duty-ratio control. Being directly linked with deadbeat current control scheme, the proposed control method accomplishes suppression of the spikes and dips superimposed on the current and torque responses during the commutation intervals of the inverter. Effectiveness of the proposed control method is verified through simulations and experiments.