• 한국멀티미디어학회논문지
• /
• 제10권10호
• /
• pp.1295-1309
• /
• 2007

인프라스트럭처 모드 기반의 무선랜(Wireless Local Area Networks)을 사용하는 무선 홈네트워크에서는 모든 무선 단말간의 통신이 액세스포인트를 통하여 이루어진다. 따라서 무선 단말이 음영 지역(Dead Zone)으로 이동하면 이동한 무선 단말과 액세스포인트간의 통신이 불가능하여 끊김없는 연결(Seamless Connection)을 제공하지 못하는 문제점이 있다. 기존의 무선 홈네트워크 플랫폼에서는 이러한 문제를 해결하기 위하여 애드 혹 모드로 동작하는 무선 홈네트워크 구조에 대하여 연구하고 있지만, 애드 혹 모드 기반의 무선랜은 인프라스트럭처 모드 기반 무선랜에 비하여 네트워크 용량이 제한되는 문제가 있다. 그리고 무선 단말의 이동성을 지원하기 위해서는 애드 혹 라우팅 기법이 필요하다. 그러나 기존의 AODV 및 DSR 라우팅 기법은 무선 채널 정보를 참조하지 않고 네트워크 계층에서 독립적으로 라우팅을 수행하기 때문에 무선 채널의 상황에 빠르게 대처할 수 없어 끊김없는 연결을 제공할 수 없다. 이에 본 논문에서는 종단간 끊김없는 데이터전송을 보장하기 위한 ESCOD(End-to-end Seamless multi-hop COnnection based on Dual network mode) 기반의 무선 홈네트워크 플랫폼과 VLR(Virtual Link Routing) 기법을 제안하였다. 구현된 시스템의 성능을 평가한 결과, VLR을 탑재한 ESCOD 기반의 무선 홈네트워크 플랫폼은 기존의 AODV 및 DSR 라우팅 보다 낮은 패킷 전송의 실패율과 빠른 패킷의 평균 전송시간을 제공함과 동시에 기존 인프라스트럭처 모드만을 제공하는 무선 홈네트워크 플랫폼보다 넓은 통신 범위와 향상된 TCP 성능을 확인하였다.

• 한국농공학회지
• /
• 제38권3호
• /
• pp.50-57
• /
• 1996

A numerical method is presented to obtain the natural frequencies and mode shapes of the arbitrary tapered beams with static deflection due to arbitrary distributed dead loads. The differential equation governing free vibration of such beams is derived and solved numerically. The double integration method using the trapezoidal rule is used to solve the static behaviour of beams loaded arbitrary distributed dead load. Also, the Improved Euler method and the determinant search method are used to integrate the differential equation subjected to the boundary conditions and to determine the natural frequencies of the beams, respectively. In the numerical examples, the various geometries of the beams are considered : (1) linearly tapered beams as the arbitrary variable cross-section, (2) the triangular, sinusoidal and uniform loads as the arbitrary distributed dead loads and (3) the hinged-hinged, clamped-clamped and hinged-clamped ends as the end constraints. All numerical results are shown as the non-dimensional forms of the system parameters. The lowest three natural frequencies versus load parameter, slenderness ratio and section ratio are reported in figures. And for the comparison purpose, the typical mode shapes with and without the effects of static deflection are presented in the figure. According to the numerical results obtained in this analysis, the following conclusions may be drawn : (1) the natural frequencies increase when the effects of static deflections are included, (2) the effects are larger at the lower modes than the higher ones and (3) it should be betteF to include the effect of static deflection for calculating the frequencies when the beams are supported by both hinged ends or one hinged end.

• Korean Membrane Journal
• /
• 제2권1호
• /
• pp.1-8
• /
• 2000

In Kimchi (a salt-pickled and fermented food) manufacturing industry, the process of brining and rinsing the raw vegetable produces a vast amount of wastewater of high salinity. Instead of expensive and low-efficient conventional treatment system, brining wastewater reuse system was developed using hybrid chemical precipitation/microfiltration. In the microfiltration of chemically treated brining wastewater, comparison of flux, backwashing frequency and energy consumption was made between dead-end and crossflow filtration mode. The optimum location of neutralization step in this system was also discussed in connection with the microfiltration performance. The quality test of Kimchi prepared by the reuse system confirmed the new approach was successful in terms of water/raw material(salt) saving and wastewater reduction.

• 한국막학회:학술대회논문집
• /
• 한국막학회 1999년도 심포지움시리즈 Jan-99 막분리공정을 이용한 재활용 기술
• /
• pp.1-12
• /
• 1999

In Kimchi (a salt-pickled and fermented food) manufacturing industry, the process of brining and rinsing the raw vegetable produces a vast amount of wastewater of high salinity. Instead of expensive and low-efficient conventional treatment system, brining wastewater reuse system was developed using hybrid chemical precipitation / microfiltration. In the microfiltration of chemically treated brining wastewater, comparison of flux, backwashing frequency and energy consumption was made between dead-end and crossflow filtration mode. The optimum location of neutralization step in this system was also discussed in connection with the micro filtration performance. The quality test of Kimchi prepared by the reuse system conformed the new approach was successful in terms of water/raw material (salt) savings and wastewater reduction.

• Computers and Concrete
• /
• 제14권6호
• /
• pp.745-765
• /
• 2014

In this paper, it is aimed to determine the finite element model updating effects on the structural behavior of long span concrete highway bridges. Birecik Highway Bridge located on the 81stkm of Sanliurfa-Gaziantep state highway over Firat River in Turkey is selected as a case study. The bridge consist of fourteen spans, each of span has a nearly 26m. The total bridge length is 380m and width of bridge is 10m. Firstly, the analytical dynamic characteristics such as natural frequencies and mode shapes are attained from finite element analyses using SAP2000 program. After, experimental dynamic characteristics are specified from field investigations using Operational Modal Analysis method. Enhanced Frequency Domain Decomposition method in the frequency domain is used to extract the dynamic characteristics such as natural frequencies, mode shapes and damping ratios. Analytically and experimentally identified dynamic characteristics are compared with each other and finite element model of the bridge is updated to reduce the differences by changing of some uncertain parameters such as section properties, damages, boundary conditions and material properties. At the end of the study, structural performance of the highway bridge is determined under dead load, live load, and dynamic loads before and after model updating to specify the updating effect. Displacements, internal forces and stresses are used as comparison parameters. From the study, it is seen that the ambient vibration measurements are enough to identify the most significant modes of long span highway bridges. Maximum differences between the natural frequencies are reduced averagely from %46.7 to %2.39 by model updating. A good harmony is found between mode shapes after finite element model updating. It is demonstrated that finite element model updating has an important effect on the structural performance of the arch type long span highway bridge. Maximum displacements, shear forces, bending moments and compressive stresses are reduced %28.6, %21.0, %19.22, and %33.3-20.0, respectively.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2010년도 춘계학술대회 초록집
• /
• pp.125.1-125.1
• /
• 2010

A high efficiency polymer electrolyte membrane (PEM) fuel cell stack was developed for pressurized pure hydrogen and oxygen supplying conditions. The design objective for the cell stack was to maximize the electric efficiency and to minimize exhaust-gas emissions from it simultaneously. To achieve this objective, the cell stack was designed to use pure hydrogen and oxygen as fuel and oxidant, respectively, and to be operated under high gas inlet pressures and in a stage-wise dead-end operation mode. Major components constituting the cell stack, such as membrane electrode assembly, bipolar-plate, and gasket, have been developed to meet a target durability even in severe operating conditions: high gas inlet pressures and usage of pure oxygen. A high-power fuel cell stack was assembled using these components to verify the performance. The cell stack showed a good performance in terms of the efficiency and maximum power output.

• 한국산학기술학회논문지
• /
• 제20권11호
• /
• pp.520-526
• /
• 2019

플레이트 거더교에서 I형은 매우 경제적인 단면으로 넓게 적용되고 있으며 지금까지 복합적층의 패널, 폐단면 리브로 보강된 곡판, 새로운 형태의 리브, 새로운 형식의 강박스거더 압축플랜지 개발 등의 좌굴거동에 대한 연구가 활발히 진행되었다. 하지만 이는 I형 거더의 복부판에서 발생한 국부좌굴의 원인을 정확하게 분석하는데 한계가 있었다. 따라서 본 논문에서는 실제 적용된 I형 거더의 복부판이 도로교설계기준에서 제시하는 최소두께 기준의 만족여부와 보강전과 후에 대하여 유한요소해석 프로그램 LUSAS 17.0을 사용하여 모델링하고 고정하중과 활하중에 대한 선형탄성 좌굴 해석을 수행 후 좌굴발생의 원인을 분석하였다. 보강 전은 1mode의 고유치(λ₁) 값이 0.7025로 임계좌굴하중이 작용하중보다 작아 좌굴이 발생하였지만 보강 후는 거더 지점부의 복부판에 수직 및 수평보강재를 추가함에 따라 여기에 Nodal line이 형성되고 좌굴에 대한 저항강도가 증가하여 1mode의 고유치(λ₁) 값이 1.5272로 좌굴하중에 대한 안정성을 확보한 것으로 분석되었다. 또한 지점부의 좌굴 흔적을 개선하기 위해 복부판의 일부에 덧댐판을 추가한 보강방안에 대한 좌굴해석 결과 1mode의 좌굴이 복부판의 지점부가 아닌 중앙부에서 발생하였고 고유치(λ₁)값이 3.5299로 보강 후보다 2배 이상 커서 향후 지점부의 복부판 보강방안으로는 효과적일 것으로 기대된다.

• Membrane and Water Treatment
• /
• 제9권5호
• /
• pp.373-383
• /
• 2018

Fouling by solids and microorganisms is the major obstacle limiting the efficient use of membrane wastewater treatment. In our previous study, two stages microalgae/membrane filtration system was proposed to treat anaerobic digested palm oil mill effluent (AnPOME). This two stages microalgae/membrane filtration system had showed great potential for the treatment of AnPOME with high removal of COD, $NH_3-N$, $PO_4{^{3-}}$, TSS, turbidity, and colour. However, fouling behavior of the membrane in this two stages microalgae/membrane filtration system was still unknown. In this study, empirical models that describe permeate flux decline for dead-end filtration (pore blocking - complete, intermediate, and standard; and cake layer formation) presented by Hermia were used to fit the experimental results in identifying the fouling mechanism under different experimental conditions. Both centrifuged and non-centrifuged samples were taken from the medium with 3 days RT intervals, from day 0 to day 12 to study their influence on fouling mechanisms described by Hermia for ultrafiltration (UF), nanofiltration (NF), and reverse osmosis (RO) filtration mode. Besides, a more detailed study on the use of resistance-in-series model for deadend filtration was done to investigate the fouling mechanisms involved in membrane filtration of AnPOME collected after microalgae treatment. The results showed that fouling of UF and NF membrane was mainly caused by cake layer formation and it was also supported by the analysis for resistance-in-series model. Whereas, fouling of RO membrane was dominated by concentration polarization.

• 복식문화연구
• /
• 제7권3호
• /
• pp.50-57
• /
• 1999

Folk belief, which originated with the rise of human existence is a fundamental and comprehensive mode of living that reflects sociocultural conditions. Adherents of folk belief accept a certain thing to be true and real without scientific authority and absolute certainty. Taboo can be seen as a king of folk belief. The object of this study is to examine the taboos in relation to the manufacturing process and the quality of the shroud and to shrouding customs. I will also try to find out the meaning and significance in this. Through this task, I hope to contribute to the enhanced understanding of the cultural characteristics, the spiritual life, and the views on after life of the Korean people. In Korea, it is considered to be propitious to prepare the shroud on the intercalary month of the leap year , as it allows one to enjoy longevity healthy and sound. Moreover, as this belief gives credence and repose while preparing for the “final departure”, this custom is relatively well observed. From the taboo concerning leap months, we infer that death as viewed as a commencement of a new life, which reveals a positive view on afterlife. This can be seen as a return to the origin of anti-universal space in this “bonus” month of anti-universal time. Taboos on the manufacturing process of the shroud is related to the belief that it allows the deceased to go the nest world without any hesistation or disturbances. This symbolizes the immortality of the human soul: I. e. that the human spirit does not end in this world but continues on to the next. Taboos concerning the preparation process of the shroud as well as various other taboos are related to the belief that preparation for the shroud should be done in sincerity and secredness with a thoughtful consideration for the deceased. This can be perceived as an implication to sanctity for the dead.

• Tuberculosis and Respiratory Diseases
• /
• 제46권5호
• /
• pp.662-673
• /
• 1999

연구배경 : Pressure-controlled ventilation(PCV)은 최근 호흡부전 환자에게서 자주 사용되는 환기방식이다. 이론적으로 PCV은 초기에 높은 기류를 제공하므로 volume-controlled ventilation(VCV)에 비해 최고흡기압이 낮고 가스교환에 이점이 있을 것으로 사료된다. 그러나 PCV에서 최고흡기압이 낮은 것에 대해서는 대부분의 보고가 일치하고 있으나 가스교환에 대해서는 상반된 결과를 보고하고 있다. 따라서 본 연구는 호흡부전 환자에서 PCV과 VCV간의 호흡역학과 가스교환의 비교 및 I : E ratio의 변동에 따른 차이가 있는지를 알아보고자 본 연구를 시행하였다. 방 법 : 호흡부전으로 기계호흡을 받고 있는 9명의 환자를 대상으로 하였다. 각 대상환자에서 흡기산소농도, 일회호흡용적, 호흡수 및 호기말양압은 변화시키지 않고, PCV와 VCV을 번갈아 적용하고 I : E ratio를 1 : 2, 1 : 1.3 및 1.7 : 1로 변화시키면서 기도압과 동맥혈 가스분석, 호기 이산화탄소 농도를 측정하여 PCV과 VCV 간의 호흡역학과 가스교환을 비교하였다. 결 과 : PCV과 VCV 모두에서 I : E ratio를 증가시킴에 따라 평균기도압이 증가하였고, $PaCO_2$와 생리적 사강이 감소하였다. 그러나 P(A-a)$O_2$는 변하지 않았다. 각각의 I : E ratio 모두에서 최고흡기압은 PCV시 더 낮았으며, 평균기도압은 PCV에서 더 높았다. 그러나 $PaCO_2$, 생리적 사강 및 P(A-a)$O_2$는 PCV과 VCV간의 차이를 보이지 않았다. 결 론 : 동일한 일회호흡용적, 호흡수 및 I : E ratio 상태에서는 두 환기 양식의 차이에 따른 가스교환의 차이가 없었다.