1 |
Kupfer, H. and Gerstle. (1973), "Behavior of concrete under biaxial stresses", ASCE, J. Eng. Mech. Div., 99(4), 853-866.
|
2 |
Kupfer, H., Hilsdorf, H.K. and Rusch, H. (1969), "Behavior of concrete under biaxial stresses", Proceedings of ACI J., 66(8), 656-666.
|
3 |
Kwak, H.G. and Filippou, F.P. (1990), Finite Element Analysis of Reinforced Concrete Structures under Monotonic Loads, Report No. UCB/SEMM-90/14, Earthquake Engineering Research Centre, University of California, Berkeley.
|
4 |
Li, L.Y. and Harmon T.G. (1990), "Three-parameter failure criterion for concrete", ASCE, J. Mater. Civil Eng., 2(4), 215-222.
DOI
|
5 |
Liu, T.C.Y., Nilson, A.H. and Slate, S.F.O. (1972), "Stress-strain response and fracture of a concrete in uniaxial and biaxial compression", Proceedings of ACI Journal, 69(5), 291-295.
|
6 |
Lee, S.K., Song, Y.C. and Han, S.H. (2004), "Biaxial behavior of plain concrete of nuclear containment building", Nuclear Eng. Des., 227(2), 143-153.
DOI
|
7 |
Linhua, J., Dahai, H. and Nianxiang, X. (1991), "Behavior of concrete under triaxial compressivecompressive tensile stresses", ACI Mater. J., 88(2), 181-185.
|
8 |
Menetrey, P. and Willam, K.J. (1995), "Triaxial failure criterion for concrete and its generalization", Proceedings of ACI Journal, 92(3), 311-318.
|
9 |
Mills, L.L. and Zimmerman, R.M. (1970), "Compressive Strength of Plain Concrete Under Multiaxial Loading Conditions", Proceedings of ACI J., 67(10), 802-807.
|
10 |
Mlakar, P.F., Vitaya-Udom, K.P. and Cole, R.A. (1985), "Dynamic tensile-compressive behavior of concrete", ACI Journal, 86(5), 484-491.
|
11 |
Mansour, M.H. (2010), "Theoretical analysis of tunnel lining subjected to fire", J. Eng. Sci., 38(3), 619-640.
|
12 |
Nayak, G.C. and Zeinkiewicz, O.C. (1972), "Convenient forms of stress invariants for plasticity", ASCE, J. Struct. Eng., 98(4), 949-954.
|
13 |
Ottosen N.S. (1993), "A failure criterion for concrete", ASCE, J. Eng. Mech. Div., 103(4), 527-535.
|
14 |
Ren, X., Yang, W., Zhou, Y. and Li, J. (2008), "Behavior of high performance concrete under uniaxial and biaxial loading", ACI Mater. J., 105(6), 548-557.
|
15 |
Ribeiro, G. de O. and Oliveira, A.L. (1998), "Elastoplastic analysis of RC plates using the Reissner's model and the boundary element method", Proceedings of Computational Mechanics, New Trends and Applications, Barcelona, Spain.
|
16 |
Seow, P.E.C. and Swaddiwudhipong S. (2005), "Failure surface for concrete under multiaxial load - a unified approach", ASCE, J. Mater.Civil Eng., 17(2), 219-228.
DOI
ScienceOn
|
17 |
Sinha, B.P., Gerstle, K.H. and Tulin, L.G.(1964), "Stress-strain relations for concrete under cyclic loading", Proceedings of ACI Journal, 61(2), 195-212.
|
18 |
Tasuji, M.E., Slate, F.O. and Nilson, A.H. (1978), "Stress-strain response and fracture of concrete in biaxial loading", Proceedings of ACI Journal, 75(7), 306-312.
|
19 |
Tsai, W.T. (1988), "Uniaxial compressional stress-strain relation of concrete", ASCE, J. Struct. Div., ASCE, 114(9), 2133-2166.
DOI
ScienceOn
|
20 |
Vecchio (1998), "Lessons from the analysis of a 3-D concrete shear wall", Struct. Eng. Mech., 6(4), 439-455.
DOI
ScienceOn
|
21 |
Willam, K. and Warnke, E. (1975), "Constitutive model for triaxial behaviour of concrete", Proceedings of the International Association for Bridge and Structural Engineering, Zurich, Switzerland, 1-30.
|
22 |
Yan, Z. and Pantelides, C.P. (2006), "Fiber-Reinforced polymer jacketed and shape - modified compression members: II - Model", ACI Struct. J., 103(6), 894-903.
|
23 |
Yin, W.S., Su, E.C.M., Mansur, M.A. and Hsu, T.T.C. (1989), "Biaxial tests of plain and fibre concrete", ACI Mater. J., 86(3), 236-243.
|
24 |
Yu, M.H. (2002b), "Advances in strength theories for materials under complex stress state in the 20th century", Appl. Mech. Rev. ASME, 55(3), 169-218.
DOI
ScienceOn
|
25 |
Yu, M.H. (2004), "Unified strength theory and its applications", Springer, Berlin.
|
26 |
Zhi, W.C., Hai, G.Z. and Qin, Z.X. (1987), "Experimental investigation of biaxial and triaxial compressive concrete strength", ACI Mater. J., 84(2), 92-100.
|
27 |
Balmer (1949), Shearing Strength of Concrete under High Triaxial Stress-Computation of Mohr's Envelope as a Curve, Structural Research Laboratory Report, No SP-23, United States Department of the Interior, Bureau of Reclamation, Washington, DC.
|
28 |
Bhargava, P., Bhowmick, R., Sharma, U. and Kaushik, S.K. (2006), "Three-dimensional finite element modeling of confined high-strength concrete columns", Special Publication, ACI , 238, 249-266.
|
29 |
Bortolotti, L., Carta, S. and Cireddu, D. (2005), "Unified yield criterion for masonry and concrete in multiaxial stress states", ASCE, J. Mater. Civil Eng., 17(1), 54-62.
DOI
ScienceOn
|
30 |
Brestler, B. and Pister. (1958), "Behavior of concrete under triaxial compressive-compressive-tensile stresses", ACI Mater. J., 8(2), 181-185.
|
31 |
Brestler, B. and Pister. (1958), "Strength of concrete under combined stresses", Proceedings of ACI Journal, 55(3), 321-346.
|
32 |
Buyukozturk, O. and Shareef. S.S. (1985), "Constitutive modeling of concrete in finite element analysis", Comput. Struct., 21(3), 581-610.
DOI
ScienceOn
|
33 |
Carreira, D.J. and Chu, K.H. (1986), "Stress-strain relationship for plain concrete in compression", Proceedings of ACI Journal, 82(6), 797-804.
|
34 |
Chen, A.C.T. and Chen, W.F. (1975), "Constitutive relations for concrete", J. Eng. Mech. Div. 101(4), 465-481.
|
35 |
Cedolin, L., Crutzen, Y.R.J. and Dei Poli, S. (1977), "Triaxial stress-strain relationship for concrete", ASCE, J. Eng. Mech. Div., 103(3), 423-439.
|
36 |
Ansari, F. (1987), "Stress-strain response of microcracked concrete in direct tension", ACI Mater. J., 84(6), 481-490.
|
37 |
Darwin, D. and Pecknold, D.A. (1977), "Nonlinear biaxial stress-strain law for concrete", ASCE, J. Eng. Mech. Div., 103(2), 229-241.
|
38 |
Bagheripour, M.H., Rahgozar, R., Pashnesaz, H. and Malekinejad, M. (2011), "A complement to hoekbrown failure criterion for strength prediction in anisotropic rock", Geomech. Eng., 3(1), 61-81.
DOI
ScienceOn
|
39 |
Chen, W. F. (1982), "Plasticity in reinforced concrete", McGraw-Hill, New York.
|
40 |
Chen, W.F. and Han, D.J. (2008), "Plasticity for structural engineers", J. Ross Publishing, India.
|
41 |
Dede, T. and Ayvaz, Y. (2010), "Comprative study of plasticity models for concrete material by using different criteria including Hseih-Ting-Chen criterion", Mater. Des., 31(3), 1482-1489.
DOI
ScienceOn
|
42 |
Du, X.L., Lu D.C., Gong, Q.M. and Zhao, M. (2010), "Nonlinear unified strength criterion for concrete under three-dimensional stress states", ASCE, J. Eng. Mech. Div., 131(1), 51-59.
|
43 |
Fanning, P. (2001), "Nonlinear models of Reinforced and post-tensioned concrete beams", Elect. J. Struct., 2, 111-119.
|
44 |
Fan, S.C. and Wang, F. (2002), "A new strength criterion for concrete", ACI Struct. J., 99(3), 317-326.
|
45 |
Fardis, M.N., Alibe, B. and Tasoulas, J.L. (1983), "Monotonic and cyclic constitutive law for concrete", ASCE, J. Eng. Mech. Div., 109(2), 516-536.
DOI
ScienceOn
|
46 |
Fehling, E., leutbecher, T. and Roeder, F.K. (2011), "Compression-Tension strength of Reinforced and Fiber- Reinforced concrete", ACI Struct. J., 108(3), 350-359.
|
47 |
Folino, P., Etse, G. and Will, A. (2009), "Performance dependent failure criterion for normal-and highstrength concretes", ASCE, J. Eng.Mech. Div., 35(12), 1393-1409.
|
48 |
Han, D.J. and Chen, W.F. 1987), "Constitutive modelling in analysis of concrete structures", ASCE, J. Eng. Mech. Div., 113(4), 577-593.
DOI
ScienceOn
|
49 |
Gardner, N.J. (1989), "Triaxial behavior of concrete", Proceedings of ACI Journal, 66(2), 136-146.
|
50 |
Gopalarathnam, V.S. and Shah, S.P. 1985), "Softening response of plain concrete in direct tension", ACI Struct. J., 82(2), 310-323.
|
51 |
Hinchberger, S.D. (2009), "Simple single-surface failure criterion for concrete", Technical Notes. ASCE, J. Eng. Mech., 135(7), 729-732.
DOI
ScienceOn
|
52 |
Hughes, B.P. and Chapman, G.P. (1966), "The complete stress-strain curve for concrete in direct tension", RILEM Bulletin, 30, 95-97.
|
53 |
Hussein, A. and Marzouk, H. (2000), "Behavior of high-strength concrete under biaxial stresses", ACI Mater. J., 97(1), pp. 27-36.
|
54 |
Imran, I. and Pantazopoulou, S.J. (2001), "Plasticity model for concrete under triaxial compression", ASCE, J. Eng. Mech. Div., 127(3), 281-290.
DOI
ScienceOn
|
55 |
Imran, I. and Pantazopoulou, S.J. (1991), "Experimental study of plain concrete under triaxial stresses", ACI Mater. J., 93(6), 589-601.
|
56 |
Karam, G. and Tabbara, M. (2012), "Hoek-brown strength criterion for actively confined concrete", J. Mater. Civil Eng., 21(3), 110-118.
|
57 |
Karsan, I.D. and Jirsa, J.O. (1969), "Behavior of concrete under compressive loadings", ASCE, J. Struct. Div., 95(12), 2543-2563.
|
58 |
Kotsovos, M.D. and Newman J.B. (1977), "Behavior of concrete under multiaxial stress", Proceedings of ACI J., 74(9), 443-446.
|
59 |
Cedolin, L. and Mulas, M.G. (1984), "Biaxial stress-strain relation for concrete", ASCE, J. Eng. Mech. Div., 110(2), 187-206.
DOI
ScienceOn
|
60 |
Seow, P.E.C. (2005), "A unified failure criterion for normal, high-strength and steel fibre-reinforced concrete", PhD Thesis, Department of Civil Engineering, National University of Singapore, Singapore.
|
61 |
Lan, S. and Guo, Z. (1999), "Biaxial compression behavior of concrete under repeated loading", ASCE, J. Mater. Civil Eng., 105(11), 105-115.
|
62 |
Hognestad, E., Hansen, N.W. and McHenry, D. (1955), "Concrete stress distribution in ultimate strength design", ACI Journal, 52(4), 455-480.
|