• 해양환경안전학회지
• /
• 제2권S1호
• /
• pp.77-85
• /
• 1996

As conservation of global environment has becoming a major outstanding issue of the world, the International Maritime Organization(IMO) has been legislation a convention for prevention of air pollution from ships. By the new convention, use of air pollutants such SOx, NOx, Freon and Halin Gas shall be restricted. In this regards, analysing these requirements of the convention is required as the cinvention will also be applied in restriction of descharging exhaust gases from ships by estsblishing a requirement of Sox and NOx discharged. The purpose of this study is as follows; 1) Introdcuing of the backgrounds of legislating the convention for prevention of air pollution from ships and major contents of the convention and a countermeasuures in the convention by Korea 2) Reviewing by analyzing the influence in domestic industries concernd by restriction of SOx, NOx in exhaust gases and sulpher content of fuel oil 3) Preparing a countermeasure in the convention properly.

• Journal of Advanced Marine Engineering and Technology
• /
• 제20권2호
• /
• pp.69-69
• /
• 1996

As conservation of global environment has becoming a major outstanding issue of the world, the International Maritime Organization(IMO) has been legislation a convention for prevention of air pollution from ships. By the new convention, use of air pollutants such as SOx, NOx, Freon and Halon Gas shall be restricted. In this regards, analysing these requirements of the convention is required as the convention will also be applied on restriction of discharging exhaust gases from ships by establishing a requirement of SOx and NOx discharged. The purposed of this study is as follows ; 1) Introducing of the backgrounds of legislating the convention for prevention of air pollution from ships and major contents of the convention and a countermeasures on the convention by Korea. 2) Reviewing by analyzing the influence on domestic industies concerned by restriction of SOx, NOx in exhaust gases and sulphur content of fuel oil. 3) Preparing a countermeasure on the convention properly.

• 한국산학기술학회논문지
• /
• 제19권1호
• /
• pp.18-24
• /
• 2018

친환경자동차의 보급 확대를 위한 정책수립과 기술개발이 지속적으로 이루어지고 있는 실정이나 아직까지도 내연기관이 차지하는 비중은 약 95% 차지하고 있다. 화석연료를 기반으로 하는 내연기관의 엄격한 배기가스규제를 충족시키기 위해 자동차와 선박용 후처리장치의 비중이 점차로 증가하고 있다. 천연가스는 대기환경 오염물질을 거의 배출하지 않는 청정연료이며, 주로 시내버스의 연료로 사용되어져 왔다. CNG 버스의 보급률이 계속적으로 증가하고 있으며 이에 대한 엄격한 배기규제를 충족시키고 경제적인 후처리장치의 연구개발이 필요하다. 장기적인 연구로는, CNG 버스에서 배출되는 유독성가스인 $CH_4$와 NOx를 동시저감시키는 새로운 NGOC/LNT+NGOC/SCR 복합시스템을 개발하는 것이다. 이 연구는 복합시스템 후단에 장착되는 선택적인촉매환원(SCR)의 washcoat를 세라믹과 메탈 담체에 코팅하여 $de-CH_4/NOx$ 특성을 파악하는 것이다. V, Cu-SCR 촉매는 $CH_4$ 산화반응에는 영향을 미치지 않고, 이중층으로 코팅된 2, 4번 NGOC/SCR 촉매는 $400^{\circ}C$에서 $CH_4$가 산화되기 시작하여 약 $550^{\circ}C$에서는 약 20% 수준으로 $CH_4$가 저감되었다. NGOC/SCR처럼 two layer로 코팅된 2, 4번 SCR 촉매는 $350^{\circ}C$이상에서는 마이너스(-) NOx 전환률을 나타냈다. 이는 $ NH_4NO_3$(질산염)으로 흡장되어 있는 NOx가 촉매의 반응속도가 저하됨에 따라 $N_2$로 환원되지 못하고 $NO+NO_2$로 탈착되었기 때문이다. 세라믹 기반의 복합시스템은 $400^{\circ}C$에서 약 30%, $500^{\circ}C$에서 LOT50에 이르러 메탈 기반의 복합시스템보다 약 20% CH4 정화 성능이 높았고, NGOC/LNT+Cu-SCR 복합시스템 조합이 적합하다.

• 공업화학
• /
• 제32권6호
• /
• pp.695-699
• /
• 2021

본 연구에서는, 노후된 엔진을 사용하는 트럭 및 특수차량에서 배출되는 NO_x 및 PM을 동시에 제거하기 위해 SDPF 후처리 시스템 연구를 수행하였다. 우선, SDPF의 SCR 촉매를 선정하기 위해서, V/TiO₂와 Cu-zeolite 촉매의 de-NO_x 성능을 비교하였으며, SCR 촉매특성분석은 BET, XRD 및 NH₃-TPD를 통해 분석하였다. 촉매 활성시험 결과, Cu-zeolite 촉매가 가장 우수한 내열성을 보여주었다. 최적의 SDPF 코팅을 위해서, 목표로 설정된 입자 크기에 맞추어 슬러리를 제조하였다. SCR 코팅량에 따른 SDPF의 코팅안정성과 배압 결과, SDPF 촉매를 로딩량별로 A, B, C 샘플을 제작하여 코팅안정성과 배압 및 de-NOx 성능을 비교한 결과 B 샘플에서에서 가장 우수한 결과를 보였다. 최적 SDPF 후처리시스템에 대해 엔진동력계 시험을 실시하였으며, 시험결과 Eu-5 규제를 만족하였다.

• 한국분무공학회지
• /
• 제23권4호
• /
• pp.212-220
• /
• 2018

As increase the number of vehicles, the issue of greenhouse gas that was emitted by them became important. As a result, greenhouse gas (GHG) regulations are being strengthened and efforts are being actively made to reduce greenhouse gas emissions in the automotive industry. In the other hand, regulations for harmful emission of vehicles have been reinforced by step. Especially, the lastly applied step, so called Euro 6, not only decreased NOx limit down to half of Euro 5 but also introduced real driving emission limit for NOx and PN. It is a challenge for manufacturers to meet the recent GHG regulation as well as the latest emission regulation. To overcome these regulations a De-NOx after-treatment system is being applied to diesel vehicles that are known emitting the lowest GHG among conventional internal combustion engines. At the time of the introduction of Euro 6 emission standard in Korea, in the domestic fuel economy certification test, some diesel vehicles emitted more $CH_4$ than Euro 5 vehicles. As a result, it was confirmed that LNT-equipped vehicles emitted a high level $CH_4$ and the level exceeded the US emission standard. In order to determine the reason, various prior literature was investigated. However, it was difficult to find a detailed study on the methane increase with LNT. In this paper, to determine whether the characteristics of vehicles equipped with LNT the affects the above issue and other greenhouse gases, 6 passenger cars were tested on several emission test modes and ambient temperatures with a environment chamber chassis dynamometer. 2 cars of these were equipped with LNT only, other 2 cars had SCR only, and LNT + SCR were applied to remaining 2 cars. The test result shown that the vehicles equipped with LNT emitted more $CH_4$ than the vehicles with SCR only. Also, $CH_4$ tended to increase as the higher acceleration of the test mode. However, as the test temperature decreases, $CH_4$ tended to decreased. $CO_2$ was not affected by kinds of De-NOx device but characteristic of the test modes.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2001년도 제22회 KOSCI SYMPOSIUM 논문집
• /
• pp.99-105
• /
• 2001

For the design of selective catalytic reactors of NOx by $NH_3$, engineering approach can be performed to determine the reactor shape, mixing device and $NH_3$ injection system. This study shows the optimization of guide vanes to improve the flow pattern near the catalyst layer of SCR in a untility boiler. By varying their spacings and shapes, flow performance of guide vanes was analyzed to achieve an uniform velocity distribution which increases the NOx convesion efficiency, and a flow direction normal to the layer which minimises the erosion by the dust in the flue gas. Including these results, experimental and numerical studies for the SCR design were discussed.

• 동력기계공학회지
• /
• 제19권4호
• /
• pp.30-35
• /
• 2015

The purpose of this study is to identify the low temperature performance and strength characteristics of V-based extruded homogeneous SCR. The extruded catalyst and the coated catalyst showed 50% and 27% of NOx conversion performance respectively at about $210^{\circ}C$ of catalyst temperature, so the extruded SCR was higher in de-NOx performance than the coated SCR especially at a low temperature zone. The compressive strength of the Enhanced Extrusion #1, in which the content of promoters such as silica, clay, glass fiber and binder was optimized, was a 120% improvement compared to the Extrusion#1 catalyst, higher than the coated SCR.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2008년도 하계학술대회 논문집
• /
• pp.15-17
• /
• 2008

저온 플라즈마를 이용한 탈황탈질 시스템은 한 개의 반응기에서 오염물질을 동시에 제거함으로써 설비가 매우 compact하고 운전비가 저렴한 장점을 가지고 있다. 본 논문은 펄스 고전압 방전에 의한 저온플라즈마를 이용하여 Sox, Nox동시 제거를 위한 전원장치의 회로 구성과 전원장치의 동작특성을 설명하였다. 그리고 당사의 탈황탈질 시스템 기술현황 및 향후계획을 논의하였다.

• 공업화학
• /
• 제23권3호
• /
• pp.348-351
• /
• 2012

본 연구에서는 NO의 저온 SCR 반응에서 구리 첨가가 $Mn/CeO_2-ZrO_2$ 촉매의 활성에 미치는 영향을 알아보았다. 이를 위하여 $Mn/CeO_2-ZrO_2$ 촉매에 구리가 각각 5, 10, 15 wt% 첨가된 세가지 촉매의 활성을 조사하였다. 촉매의 특성은 BET, XRD, XPS, $H_2-TPR$을 통해 분석하였다. 구리가 첨가된 촉매의 질소산화물 저감 효율을 측정한 결과 Cu 농도가 증가할수록 활성이 증가하였으며 Cu 15 wt%가 담지하였을 경우 질소산화물 저감효율이 99%까지 도달하는 등 가장 높은 저감효율을 나타내었다. 이는 표면의 망간과 구리의 interaction에 의한 환원의 향상이 촉매 효율 증가의 원인으로 여겨진다.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2008년도 동계학술발표대회 논문집
• /
• pp.340-344
• /
• 2008

The importance of the more efficient cogeneration system is emphasized. Also the more clean energy is needed at recent energy system. The cogeneration system using Lean burn engine is more preferred to the system using Rich burn engine because of the electrical efficiency. Although the cogeneration system using Lean burn engine is economically preferred, because of the NOx emission level, the system using Rich burn engine with 3-way catalyst can only be used in Korea. The NOx regulation level is 50ppm at oxygen level 13%. The cogeneration hybrid system using Lean burn engine is up to be optimized because of the large amount of the extra-fuel at the after-burner system. The after-burner system at different concept was applied. The reduction time for the activation temperature of the DeNOx catalyst was achieved by making a hole between the combustor and boiler. Because of the lowered fuel consumption, the lowered temperature level was optimized by blocking the hole of the boiler The optimized cogeneration hybrid system consumes $76Nm^3/h$ LNG to produce 150kW electricity compared to before optimization $103Nm^3/h$ LNG. The system was accurately evaluated and the result is following ; 90% total efficiency, below 10 ppm NOx, 50ppm CO, 25ppm HC. The cogeneration hybrid system can meet the current NOx level and exhaust gas regulation. It can achieve the clean combustion gas and efficient cogeneration system.