• Progress in Superconductivity and Cryogenics
• /
• v.11 no.2
• /
• pp.11-14
• /
• 2009

We estimated the critical current distribution of the long length CCs using hall probe method, and checked the reliability by comparing with the four-probe dc transport method. The deviation ratio of $I_{c-T}$ (a measured critical current by four probe dc transport method) and $I_{c-H}$ (calculated critical current by formula (3).) was nearly smaller than 12%. The Hall probe method appeared powerful to evaluate the critical current of CCs in a reel to reel system.

• Journal of IKEEE
• /
• v.23 no.3
• /
• pp.785-792
• /
• 2019

In parallel operation of multiple power converter modules, equal power distribution among modules shall be made to improve the reliability of the system. In this paper, a novel droop method is proposed to present improved current distribution characteristics. In the proposed method, if the current in each module become greater than the current set-point value, the output voltage set-point is raised to improve the current distribution characteristics. Meanwhile, when the output voltage is to be managed within the tolerance range, the range of the usable control IC reference value ($v_{ref}$) will be reduced if the output voltage setting is always raised. Thus, in case the output voltage set-point among modules is reversed, the downward adjustment is introduced. The proposed method was experimentally validated with a 17.5V/500mA prototype of two boost converters operating in parallel.

• Proceedings of the KIEE Conference
• /
• 1995.11a
• /
• pp.435-437
• /
• 1995

It is important to understand tile behaviours of tile high pressure DC glow discharge with a micro gap inside a pixel of the plasmas display panel. We prepared a narrow gap discharge system and have measured electron temperature and density by means of double probe methods in high pressure which was between 100torr and 200torr. And the electrode gap was 7mm. When the pressure varied from 100torr to 200torr, the negative glow was created at a distance less than 1mm from the cathode. And the length of the faraday dark space decreased from 8mm to 5mm. Hence probe measurements was mainly, performed in the region of the Faraday dark space. The dependence of electron temperature and density on the pressure and current density was same with that of the general flow discharge, i.e. as the pressure increased the electron temperature decreased and the density increased. But the spatial electron density distribution in the Faraday dark space was highly distorted because of the effect of high pressure.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.50 no.1
• /
• pp.1-9
• /
• 2001

In this paper, the general research on the analysis of the vibration due to magnetic exciting force in the small brushless DC(BLDC) motor, which is used in the Digital Versatile Disk(DVD) ROM driving system, is performed. The first part of the study is the analysis of the magnetic exciting force in the air gap region. As a verification of the exciting force by numerical analysis, the magnetic exciting force distribution in the air gap region is computed by using Reluctance Network Method(RNM). In addition, the effect of the eccentricity on the magnetic exciting force is discussed. The other part of the research is the structural analysis of the rotor structure of the BLDC motor. The matural mode analysis of the rotor structure is performed, and the vibration response due to magnetic exciting force is found. As a result of the procedures, the basic estimation of the effect of the magnetic exciting force on the vibration of BLDC motor is suggested.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.7 no.1
• /
• pp.34-46
• /
• 2004

Copper films were prepared by using ECR-MOCVD(Electron Cyclotron Resonance Metal Organic Chemical Vapor Deposition) coupled with a DC bias system. The DC bias is connected to the electrode which placed 1∼3cm above the polymer substrate. The pulse electrical field around the electrode attracts the positive charged copper ions generated from the dissociation of copper precursor, $Cu(hfac)_2$, under ECR plasma. Condensation of supersaturated copper ions in the space between the electrode and substrate, makes it possible to deposit copper film on the polymer substrate even at room temperature. In this study, optimization of the electrode configuration was carried out in order to obtain the uniform films. The uniformity of the deposited films were closely related to the parameters of electrode geometry such as electrode shape, thickness, grid size and the spacing between electrodes. The most uniform copper film was observed with the electrode that enabled uniform electrical field distribution across the whole dimension of electrode.

• The Journal of Industrial Distribution & Business
• /
• v.8 no.2
• /
• pp.21-31
• /
• 2017

Purpose - The total amount of advanced Corporate Pension Insurance products exceed 148 trillion Korean Won at the end of 2016. For a firm with over 300 employees, when a bill on compulsion of introduction of Corporate Pension Insurance products, currently pending in court, is passed, Corporate Pension shall be an essential. The findings of the paper will provide a guideline for understanding on firm's attributes and its effects towards introduction of Corporate Pension Insurance products. Research design, data, and methodology - The data were collected using statistics of employer panel survey from Korea Labour Institute in 2013. The study analyses a sample survey on 1,775 outstanding enterprises and their HR department among whole corporations in Korea. For analysis of data, empirical testing by Logistic Regression was utilized. Results - As an outcome of empirical testing, variables on share of regular employees and the aged employees in over 50's generates a significant statistical meaning. It eventually gives a great impact on purchase of Corporate Pension scheme. Moreover, variables on corporate financial statement, current sales, current net income, total amount of the debts, labor cost per person also has a vital influence on introduction of Corporate Pension Insurance products. Lastly, variables on firm's labor relationship have no effect except for the execution or non-execution of HR consulting. Meanwhile, Variables affecting a choice on pension schemes types among firm's attributes are a share of regular employees, current net income, execution or non-execution of HR consulting etc. These variables represents a statistical implication. According to their each features, they prefer DB or DC plan. Conclusions - Introduction of corporate pension scheme is apposite to contemporary Korea's situation entering a hyper-aging society and firms with a high share of regular employees, the weight of aging, current sales, current net income and labor cost per person are exceedingly active in purchasing Corporate Pension Insurance products. However, after the introduction of corporate pension scheme, firms which has an implementation of consultation on human resource management, flexible benefits plan, job security and welfare system prefer DC plan whereas from financial perspective firms with high net income prefer DB plan.

• Journal of Korea Society of Industrial Information Systems
• /
• v.29 no.3
• /
• pp.41-49
• /
• 2024

In this paper, we validate simulation results for the design optimization of a Superconducting Fault Current Limiter (SFCL) intended for use in Medium Voltage Direct Current systems (MVDC). With the increasing integration of renewable energy and grid connections, researchers are focusing on medium-voltage systems for balancing energy in new and renewable energy networks, rather than traditional transmission or distribution networks. Specifically, for DC distribution networks dealing with fault currents that must be rapidly blocked, current-limiting systems like superconducting current limiters offer distinct advantages over the operation of DC circuit breakers. The development of such superconducting current limiters requires finite element analysis (FEM) and an extensive design process before prototype production and evaluation. To expedite this design process, the design outcomes are assimilated using a Reduced Order Model (ROM). This approach enables the verification of results akin to finite element analysis, facilitating the optimization of design simulations for production and mass production within existing engineering frameworks.

• Journal of Power Electronics
• /
• v.16 no.2
• /
• pp.464-472
• /
• 2016

This study applies the selective harmonic elimination (SHE) technique to design and operate a regulated AC/DC/AC power supply suitable for maritime military applications and underground trains. The input is a single 50/60 Hz AC voltage, and the output is a 400 Hz regulated voltage. The switching angles for a multi-level inverter and transformer turns ratio are determined to operate with special connected transformers with equal power ratings and produce an almost sinusoidal current. As a result of its capability of directly controlling harmonics, the SHE technique is applicable to apparatus with congenital immunity to specific harmonics, such as series-connected transformers, which are specially designed to equally share the total load power. In the present work, a single-phase 50/60 Hz input source is rectified via a semi-controlled bridge rectifier to control DC voltage levels and thereby regulate the output load voltage at a constant level. The DC-rectified voltage then supplies six single-phase quazi-square H-bridge inverters, each of which supplies the primary of a single-phase transformer. The secondaries of the six transformers are connected in series. Through off-line calculation, the switching angles of the six inverters and the turns ratios of the six transformers are designed to ensure equal power distribution for the transformers. The SHE technique is also employed to eliminate the higher-order harmonics of the output voltage. A digital implementation is carried out to determine the switching angles. Theoretical results are demonstrated, and a scaled-down experimental 600 VA prototype is built to verify the validity of the proposed system.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.21 no.4
• /
• pp.135-141
• /
• 2021

Interest is growing in the design and development of square wave driven BLDC permanent magnet motors suitable for industrial automation, and the development of position detection circuits and drivers. However, this motor is somewhat limited in its application despite the price and functional advantages due to the decrease in efficiency due to switching loss and vibration and noise. In the process of designing and assembling a BLDC motor, the magnetic pole angle is not uniform or the magnetic flux distribution is distorted due to problems in magnetic circuit design or product non-uniformity in the assembly process. Therefore, these things cause position detection deviation and deteriorate the motor characteristics. In addition, the sine wave driven BLDC system can operate stably only when the signal generated from the position sensor is accurately fed back to the driver. However, since the generated signal cannot perform stable position detection due to the occurrence of DC offset component due to magnetic flux density deviation or magnetization technology, which is an external influence, this study intends to study the proposed circuit that can remove the DC offset component.

• The Korean Journal of Franchise Management
• /
• v.7 no.2
• /
• pp.27-35
• /
• 2016

Purpose - The primary objective of this study is to investigate the impact of employee characteristics on employees' preference towards corporate pension products. This study can provide a guidance for maximization of benefits for employees and their affiliated corporation. Employee characteristics include average length of labour, wage system of annual salary, age, types of interest rates and size of corporation. Existing research generally concentrate on vitalizations of corporate pension product raising an imperfection, improvements, tax benefit analysis and legal consideration. Thus, this study intensively analyses the effect of employee attributes on firms' decision for corporate pension products, such as DB(defined benefit) and DC(defined contribution) type. Research design, data, and methodology - The data were collected using self-administrated questionnaire survey on corporate pension products from CEOs or HR directors 250 foreign-invested companies', purchasing pension plans in practice with domestic financial trustees (insurance companies, banks and security companies). Hypotheses testing was conducted using Logistic Regression analysis with SPSS/PC+ 21.0. Results - The findings of the study are as follows. Employees with the long length of labour are more likely to have DB plan; more likely to prefer DC plan with the dividend distribution product regarding the types of interest rate. SMEs(less than 100 employees) are more likely to select DC plan whereas high fluctuation in wage with annual salary has no impacts. In addition, the ages has no significant effect on the preference. Conclusions - This study has examined with the empirical testing that employees' variable attributes and qualities are one of the vital factors for corporation pension plan selection. Currently, majority employees are highly likely to join DB plan and Defined interest types. Corporation with less than 10 employees prefer IRP scheme while most of corporation are intended to join DC plan. In a very near future, corporation more than 300 employees will be required to purchase mandatory plan under national regulation. For maximization of employees' contentment to corporation pension insurance and for complementing the flaws of existing plans, the future studies shall also research in a perspective of employee benefit.