• 한국환경복원기술학회지
• /
• 제13권4호
• /
• pp.30-41
• /
• 2010

Research was initiated to investigate germination characteristics and germination pattern of creeping bentgrass (CB, Agrostis palustris Huds.). Seven varieties of CB were evaluated in the study. An alternative condition for a CB germination test required by International Seed Testing Association (ISTA) was applied in the experiment, consisting of 8-hr light at $25^{\circ}C$ and 16-hr dark at $15^{\circ}C$ (ISTA conditions). Daily and cumulative germination patterns were measured and analyzed on a daily basis. Significant differences were observed in germination pattern, days to the first germination, days to 50% germination, days to 85% germination, and germination percentage. Germination rates were different among the treatments at the end of study. There were significantly considerable variations in early germination characteristics and germination pattern among CB varieties. The first germination in all entries was initiated between 4 and 5 DAS (days after seeding) under ISTA conditions. Generally, the first germination percentage was 5 to 25%. However, such Penn-series varieties as Penn A-1, Penn A-4 and Penncross were much more vigorous over others, resulting in 50 to 75% in the first germination percentage. It took 4 to 10 DAS in reaching to days to the 50% germination, being 5 days in difference among the varieties. Days to the 85% germination were 5.90 to 11.75 DAS under ISTA conditions, being 5.85 days in variety difference. It means 1 to 2 days after days to 50% germination. Penn A-1 was the fastest variety, while T-1 the slowest one. Considering days to the first germination, days to 85% germination, and germination pattern etc, Penn A-1, Penn A-4, Penncross and L-93 were regarded as excellent varieties under ISTA conditions. From this study, in-depth information on germination characteristics and pattern would be usefully applied for golf course design and construction, when established with CB.

• 아시안잔디학회지
• /
• 제25권1호
• /
• pp.1-10
• /
• 2011

본 실험은 자연 실온 환경에서 크리핑 벤트그래스 신품종의 초기 발아특성 및 발아패턴을 조사하고, 그리고 변온 및 자연실은 환경에서의 그 차이점을 비교 분석해서 실무 시공에 응용할 수 있는 기초자료를 파악하고자 시작하였다. 공시재료는 크리핑 벤트그래스 7품종이었으며, 일일 발아패턴 및 누적 발아패턴을 1일 간격으로 조사하였다. 크리핑 벤트그래스 종자의 발아율, 발아패턴 및 발아특성은 온도 조건 및 품종에 따라 차이가 크게 나타났다. 공시 품종 모두 최초 발아는 ISTA 변온환경 에서 치상 후 4-5 일 사이에 시작되었지만, 자연 실온 환경에서는 대부분 품종이 ISTA 변온보다 2~3일 늦은 6~8일 사이에 시작되었다. 최초 발아 시 발아율은 ISTA 변온에서 일반적으로 5~25% 정도였고, 'Penn A-1', 'Penncross' 및 'Penn A-4' 품종의 최초 발아율은 50~70% 정도로 초기 발아가 대단히 왕성하였다. 하지만 자연 실온 환경에서 최초 발아율은 일반적으로 5~10% 정도였으며, 'Penncross', 'L-93' 및 'Penn A-4' 품종은 20~50% 정도로 초기 발아 특성이 대단히 왕성하였다. 크리핑 벤트그래스에서 발아율 50% 도달 기간은 ISTA 변온에서는 치상 후 4~10일 사이에 나타났고, 자연 실온에서는 품종에 따라 ISTA 변온보다 2~5일 정도 늦은 치상 후 6~15일 사이에 나타났다. 발아율 85% 도달 기간은 ISTA 변온에서는 치상 후 5.90~11.75일 사이였으며, 가장 빠른 종류는 'Penn A-1' 품종이었다. 하지만 자연 실온에서는 ISTA 변온보다 다소 늦은 치상 후 7.95~12.50일 사이였고, 가장 빠른 종류는 'L-93' 품종이었다. 그리고 온도 조건에 관계없이 기준 발아율 도달 기간이 가장 느린 품종은 ISTA 변온 및 자연 실온에서 각각 11.75일 및 12.50일로 나타난 'T-1' 품종이었다. 본 실험 결과 나타난 이러한 발아특성 비교 데이터는 골프장 등 잔디밭 조성 시 실무적인 기초 자료로 유용하게 활용될 수 있을 것이다.

• Journal of Biosystems Engineering
• /
• 제34권1호
• /
• pp.30-36
• /
• 2009

This study was performed to determine the effect of drying conditions on the germination properties of rapeseed after seeds were dried under different drying conditions: $40^{\circ}C$, $50^{\circ}C$, or $60^{\circ}C$ in combination with 30%, 45%, or 60% relative humidity. As analytic results, drying conditions had significant effects (P-value < 0.001) and drying temperature was considered as the main factor on the germination properties of rapeseed. When drying temperature increased or relative humidity decreased, the vigor rate and germination rate decreased, the median germination time increased. The maximum values of vigor rate and germination rate were 90% and 95.44%, and their minimum values were 60.17 and 75%, respectively. To ensure the standard germination rate of 85%. The appropriate drying zone was determined and the drying temperature should be less than $51.0^{\circ}C$, $54.5^{\circ}C$ and $58.7^{\circ}C$ at 30%, 45% and 60% RH, respectively. The values for median germination time varied from 2 to 4 days. The predicted models of germination rate, vigor rate, and median germination time were determined.

• 한국환경과학회지
• /
• 제30권1호
• /
• pp.77-85
• /
• 2021

This study was carried out to establish optimal conditions for breaking dormancy of Agastache rugosa O. Kuntze seeds. A series of experiments according to seed maturity and treatment with plant growth regulators were performed to improve germination percentage and synchronize germination of the seeds. In addition, it was conducted to test whether the useful effect of seed treatment before sowing leads to healthy seedling and early vigorous growth. The average seed size was 1.85 mm (length) × 0.82 mm(width). The seed size was much smaller than other vegetable seeds. Seeds colorappeared dark brown, the shape of the seeds was oval and the weight of 1,000seeds was 352.8 mg. The optimum germination temperature was 22℃. Light exposure during germination did not affect germination promotion, suggesting that A. rugosa seeds are a kind of dark germinating seeds. Seed dormancy lasted for 40 days after harvesting, and GA3 treatment of dormant seeds could break dormancy. There were significant differences in germination percentage and rate according to the maturity of seeds. The germination percentage of mature seeds was 10 - 18% higher than that of immature seeds, and germination rate was 2 days faster. GA3 treatment during growth regulator treatment improved germinability, but BAP or ethephone treatment did not. The optimal growth regulator concentration of for germination was the combination treatment of 100 mM GA3 ＋ 100 mM BAP.

• 한국환경복원기술학회지
• /
• 제17권2호
• /
• pp.85-92
• /
• 2014

This text was analyzed and investigated the morphological character, production time and germination characteristic of seed that collect in Chungnam, in order to offer the basic informations for slope restoration and revegetation using Indigofera amblyantha of wild shrub. Legume was cylindrical type and length 31.5mm, width 2.5mm, and seed number of per legume was full ripe 5.5, unripe 0.9. Seed was elliptical type and length 2.4mm, width 1.7mm, and weight of 1,000 seeds was 5.9g. Because seed matured within December and next year January, optimum time of seed production was in mid of January. In the treatment $H_2SO_4$ of 15 minutes, seed germination rate was the highest as 91.0%, and seed germination time (days) was the shortest as 6.7 days. Seed germination time by temperature was the shortest from $25^{\circ}C$. Therefore, seed germination of Indigofera amblyantha was very useful in the treatment $H_2SO_4$ of 15 minutes from $25^{\circ}C$ temperature.

• 한국약용작물학회지
• /
• 제21권5호
• /
• pp.394-400
• /
• 2013

This study was carried out in order to examine the germination characteristics of Atractylodes japonica seeds, and it was to develop the more efficient pre-treatment and production system of the seeds. Experiment was performed by two ways-temperature control (10, 15, 20, $25^{\circ}C$) and shading treatment (full sunlight, 35, 50, 75, 95% of full sunlight). Seed pre-treatment before the each experiment was carried out by temperature (with low temperature and wetting treatment (LTW) for 0, 15, 30, 45 and 60 days) and shading treatment (with drying at room temperature (DRT), drying at low temperature (DLT) and water soaking (WS) for 48 hours). Seeds of A. japonica were germinated well under temperature control (overall 85.3~100%), especially high temperature. And, the seeds pre-treated with LTW for 45 days germinated with a 100% success rate. Under the surveying shading treatment, the highest germination rate was 95.8% with DRT and overall 63.2~95.8%. Germination rate under seeds with WS was 63.2~7.8%. As a result of surveying the whole experiment, A. japonica seeds don't need to pre-treat cause of high germination, but if it is performed with LTW for a certain period of time, it would be more productive.

• The Korean Journal of Ecology
• /
• 제17권3호
• /
• pp.367-378
• /
• 1994

돌피(Echinochloa crus-galli (L.) Beauv.) 종자는 산포 직후 상온에서 휴면상태로 발아가 억제되고 있으나 저장기간이 지나면서 휴면이 타파되어 7~17개월후에 16~40$^{\circ}C$의 온도에서 85~95%의 최대발아율을 나타내었다. 돌피종자가 10~70% 발아하는데 요구되는 적산온도는 539~1,279Kh (degree kelvinXhours)이며 적산온도 분포함수인 F($\theta$)=1-[3D-3($\theta$-m+D)3+1]-1/2와 일치하였고 m과 D의 값은 각각 935Kh와 555kh로 나타났다. 2$^{\circ}C$에서 냉습처리한 후, 16~40$^{\circ}C$의 항온 조건하에 4$^{\circ}C$ 간격으로 처리한 돌피종자는 최종발아율과 발아속도가 대조구에 비해 증가하였다. IT regime에 있어서는 12$^{\circ}C$부터 발아속도가 증가하여 24$^{\circ}C$에서 최종발아율이 80%가 되었으며, DT regime은 24$^{\circ}C$에서 0$^{\circ}C$로 하강하는 동안 12$^{\circ}C$에서부터 발아가 시작되었으며(발아율 10%), 8$^{\circ}C$에서 20%의 최종발아율을 나타내었고 4$^{\circ}C$부터는 2차 휴면이 유도되었다. 돌피종자는 비교적 넓은 발아기능 온도범위를 가지고 있으며 개체군내의 발아시기조절에 의해 다양한 환경변화에서도 잘 적응할 수 있으며 변온과 겨울의 저온에 의해 휴면이 타파되고 봄의 기온상승과 함께 발아하는 봄발아형 종자임을 알 수 있었다.

• 한국작물학회지
• /
• 제60권3호
• /
• pp.282-292
• /
• 2015

최근 소비자들의 건강에 대한 관심이 증가함에 따라 건강기능성 성분이 다량 함유 되어 있는 유색벼 품종의 안전 육묘를 위한 종자의 발아특성, 적정 침종기간 및 적정 파종량을 구명하기 위한 시험결과는 다음과 같다. 1. 현미색이 흑색인 조생흑찰 및 신명흑찰은 비중이 1.0이하의 물에 뜨는 종자가 85.7~86.3%로 대부분을 차지하였고, 비중이 1.06이상 충실한 종자 비율은 1.0~1.3%로 다른 흑미에 비해 상대적으로 낮았다. 한편 신토흑미, 흑진주, 흑설, 흑남, 흑광은 비중이 1.0이하가 15.3~43.7%, 1.0~1.06이 24.6~39.4%, 1.0이상이 25.5~55.7%로 다양한 무게의 종자가 분포해 있었다. 그러나 적미인 홍진주, 적진주, 건강홍미는 일반벼인 일미벼와 같이 충실한 종자인 1.06이상의 비율이 84.0~86.6%로 높았고, 반면 비중이 1.0~1.06은 2.5~4.1%, 비중이 1.0이하의 물에 뜨는 종자의 비율은 9.3~12.1%로 낮았다. 2. 흑미는 일반적으로 물온도에 관계없이 발아율이 적미보다 낮았고 발아속도가 느렸으며 평균발아일수도 길었고 수분흡수율도 낮았다. 그 결과 80%이상 발아하기 까지 침종기간이 적미나 일반벼 보다 2~4일 가량 더 결렸다. 이것은 흑미는 비중이 1.0이하의 가벼운 종자가 적미보다 훨씬 높았기 때문이다. 3. 상자육묘시 흑미의 출아율은 10일묘에서 75.2~82.2%, 30일묘에서 85.3~90.9%로 적미보다 10일묘에서는 4.5~8.0%, 30일묘에서는 0~3.3% 낮았는데 이것은 미출아율 종자가 많았기 때문이었다. 4. 기계이앙 육묘시 유색벼의 안전 육묘를 위한 적정 파종량은 관행 일미벼 어린모 및 중묘의 상자당 성묘개체수를 기준으로 흑미의 경우 어린모는 200~220g, 중묘는 110~130g이었고 적미는 일반벼와 같이 어린모 220g, 중묘 130g이었다.

• 한국작물학회지
• /
• 제62권4호
• /
• pp.373-381
• /
• 2017

The main objective of this study was to increase the germination percentage of kenaf seeds with less number of times under non-saline and saline conditions. Therefore, the first goal was to assess the response of kenaf seeds to NaCl. The second goal was to evaluate the effects of $KNO_3$ on kenaf seed germination. The germination percentage exhibited a decreasing tendency in germination rate. Plant dry weight was approximately 0.2 g in all treatments at 5 days after germination. As time passed, the electrical conductivity (EC) value of hydro-priming (HP) consistently increased by 8.7 mS/cm at 24 hours of immersion. However, seeds primed with $KNO_3$ showed no difference in EC values even as times passed. Regarding the priming effect, priming in 100 mM $KNO_3$ concentration for 12 hours increased germination up to 85% in $H_20$ solution and in 0 mM $KNO_3$ concentration upto 73.8% under 0.3% NaCl solution, compared to that of Control. Germination synchronization, shoot length, and leaf unfolding of primed seeds were greater than those of the Control. In addition, main root and hair roots appeared more rapidly in the treated seeds and were more abundant compared to that of the Control. The T50 (times to reach 50% of the final germination percentage) of the Control in both $H_20$ and 0.3% NaCl solutions was 18 and 22 hours, respectively. However, when treated $KNO_3$ priming (0 to 100 mM) in $H_20$ and 0.3% NaCl solution, 9 hours was sufficient to reach T50. Primed (hydro-priming and $KNO_3$) seeds had a lower MDG (mean days untill germination; 0.6-0.62) compared to that of the Control (1.13-1.31) in $H_20$ and 0.3% NaCl solutions. Regarding dry weight of plants after priming, an increasing tendency after the priming treatment in the H20 solution was observed. Furthermore, no significant difference in plant dry weight under 0.3% NaCl stress was observed between the Control and primed seeds. Taken together, the results suggest that 50-100 mM $KNO_3$ priming for 24 hours optimize seed germination rate in less number of times of exposure with great vigor. Therefore, it is recommended for kenaf seed invigoration before planting.

• 한국식물병리학회:학술대회논문집
• /
• 한국식물병리학회 2003년도 정기총회 및 추계학술발표회
• /
• pp.106-107
• /
• 2003

The effect of biological control agent Bacillus sp. (BAC03-3-1, BAC03-3-2, BAC02-4) on pre- and postemergence Sclerotinia rot of perilla (Perilla frutescens var. japonica) caused by Sclerotinia sclerotiorum was determined from greenhouse field trials. The ability of this antagonist to reduce germination of sclerotia of S. sclerotiorum was also evaluated. In the greenhouse, suspension of BAC03-3-1 application as root drench of perilla, which provided as little as 10$\^$7/ cells/ $m\ell$ per gram of soil, significantly increased plant stand in pathogen-infested soil over that in the untreated control. All three isolates reduced the germination of sclerotia of S. sclerotiorum in loamy sand soils in the greenhouse. In loamy sand amended with rice bran the sclerotial germination was inversely correlated (r = -0.79) with perilla stand in the greenhouse. However, a higher rate of bacterial suspension with rice bran(Ig dwt./100g soil) than that applied with bacterial suspensions only was necessary to achieve a comparable reduction in sclerotial germination. In field study, all three isolates added to soil to provide 10$\^$7/ cells/$m\ell$ per gram significantly prevented Sclerotinia rot (73-85％) after 35 days of growth. The isolate BAC02-4, BAC03-3-1 and BAC03-3-2 gave final stands of 65 to 75, 60 to 70, and 55 to 60％, respectively. The addition of rice bran(1 ％) to loamy sand in the field resulted in a 10-fold increase in propagule numbers of the three isolates within 10 days of application.