• Journal of the Korean Geosynthetics Society
• /
• v.4 no.3
• /
• pp.35-43
• /
• 2005

The geosynthetic reinforced segmental retaining walls(SRW) are improved that the disadvantage of existed retaining wall and the workability in field. Recently, the segmental retaining wall is replacing the exited wall because it is quickly advanced to using by the block in-situ. The use, therefore, is increasing. But, the trends of the large scaled construction was developed that the problems likely to crack and collapse, those are caused of careless in design and construction of SRW not considering about various surrounding conditions. In this study, the cause analysis on destructed SRW was carried out that based on the datum of measured displacement of walls, rainfall features and ground sounding conditions. Also, the analysis of the global slope stability was carried out on collapsed section and non-collapsed section using critical equilibrium method. For the rational stability and analysis of slope including SRW structure, the site conditions including situations of topography, ground and histories of construction and collapse etc should be considered. The rational countermeasure methods for non-collapsed and collapsed areas may be sustained as much as possible current state.

• Spatial Information Research
• /
• v.17 no.3
• /
• pp.341-350
• /
• 2009

As the power and scale of typhoons are growing due to global warming and socioeconomic damages induced by super-typhoons are increasing, it is important to estimate inundation damages and to prepare proper adaptation plans against an attack of the super-typhoon. In this paper, we estimated the inundation damages of urban area around Haeundae beach induced by super-typhoons which follow the route of Typhoon Maemi with the conditions of Typhoon Vera (Ise Bay in Japan, 1959), Typhoon Durian (Philippine, 2006) and Hurricane Katrina (New Oleans in U.S.A, 2005). The coastal area around the Haeundae beach (Busan and Gyeongnam province) is expectedly damaged by severe storm surges. In this study we calculated the rise of sea level height after harmonizing the different datum levels of land and ocean and estimated the inundation depth, inundation area and the amount of building damages by using airborne LiDAR data and GIS spatial analysis techniques more accurately and quantitatively. As many researchers are predicting that super-typhoon of overwhelming power will occur around the Korean peninsula in the near future, the results of this study are expected to contribute to producing coastal inundation map and evacuation planning.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.27 no.2
• /
• pp.169-175
• /
• 2009

According as standard of measurement is changed to world geodetic system by surveying law revision, we need to transform previous 1/1,000 digital maps as a standards of world geodetic system. And, we should acquire standard strategy to minimize confusion and error by conversion of geodetic surveying standards. Thus, conversion of digital maps must be transformed efficiently and consistently according to notice of relevant standard. As common point, we have used 1/1,000 digital map and local geodetic system coordinates and world geodetic system coordinates that had been used in UIS business of Pusan city and, make a analysis of distortion quantity using KASM Trans Ver 2.2. As the result of distortion quantity calculation about all Pusan city, numbers of area that error is over 0.05m are 35 in case of X(N) and 43 in case of Y(E). Because some business section have especially much error, we divided into 3 areas, that was A,B,C, and analyzed. As a result of analysis, errors of more than 0.05m are occurred only 1 X(E) in the B area and 1 X(N) and 1 Y(E) in the C area. In conclusion, We think It is a good method that we consider a distortion quantity and divide a region, and transfer to world geodetic system for large area like Pusan city.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.23 no.2
• /
• pp.189-196
• /
• 2005

Recently as map making skills developed and as digital maps prevailed, peoples began to take interest in the realistic 3dimension topography rather than the flat 2 dimension one. The experiment is done by using the topographical information from the digital maps, To analyze the preciseness of this 3dimension topography, analysis of the coordinate-changed standard map image and the location errors of the plane and height from digital values of the map's topography by layers and features, were done. The visual results of locational values differed by every programs of coordinate transformation. Errors of locations also appeared from the methods of correcting the visual sources, when deciding the standard source's datum point. The plan's accuracy of the image data coordinate transformation is about ${\pm}4.1m$. In ground distance, therefore, it is included in the allowed error of the 1:25,000 scale changed map, satisfying the plan's accuracy. Also, by the use of reasonably spaced grid, it satisfied the visual topographical accuracy. Because the 3 dimension topographical map can be produced effectively and rapidly by using various scale's standard map image and the digital map, the further practical use of 3 dimension topographic map made by using the existing topographies and changed maps has high expectations.

• Journal of the Korean Institute of Gas
• /
• v.2 no.4
• /
• pp.79-84
• /
• 1998

This paper describes the minimum ignition limit voltages for LPG-Air 5.25[Vol$\%$] mixture gas by discharge sparks in radio-frequency limits using RF power supply and IEC type ignition spark apparatus. As a result, the minimum ignition limit voltages is increased in proportional to the rate of increasing of frequency in LPG-Air mixture gas. Especially, the minimum ignition limit voltages increase remarkably between 3[KHz] and 10[KHz]. It is considered that ignition is caused by one discharge until 3[KHz] and, beyond 3[KHz] ignitiof is caused by more than two discharges. The reason is analyzed that energy loss is caused by existing pause interval between discharges. It is considered that the result can be used for not only data for researches and development of intrinsically safe explosion-proof RF machines which are applied tole-equipments and detectors used in dangerous areas but also for datum for its equipment tests.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.22 no.2
• /
• pp.1-14
• /
• 2019

In rural areas, composting is a source of non-point pollutants. However, as the quantitative distribution and loading have not been estimated, it is difficult to determine the effect of composting on stream water quality. In this study, composting datum acquired by unmanned aerial vehicle(UAV) was verified by using terrestrial LiDAR, and the management status and load change of the composting was investigated by UAV with manual control flight, thereby obtaining the basic data to determine the effect on the water system. As a result of the comparative accuracy assessment based on terrestrial LiDAR, the difference in the digital surface model(DSM) was within 0.21m and the accuracy of the volume was 93.24%. We expect that the accuracy is sufficient to calculate and utilize the composting load acquired by UAV. Thus, the management status of composting can be investigated by UAV. As the total load change of composting were determined to be $1,172.16m^3$, $1,461.66m^3$, and $1,350.53m^3$, respectively, the load change of composting could be confirmed. We expect that the results of this study can contribute to efficient management of non-point source pollution by UAV.

• Journal of the Korea Society for Simulation
• /
• v.28 no.2
• /
• pp.23-33
• /
• 2019

A sub-munition which has low aspect ratio does not have flight stability and control of drag force under free-fall condition. In order to satisfy those problems, fin, which is called grid-fin, is designed instead of conventional flight fins and adapted to the sub-munition. The base model of the sub-munition is firstly set and numerical simulation of the model is conducted under transonic condition that is free-fall range of the sub-munition. Wind test is secondly performed to verify the simulation result. The result shows that grid fin adapted sub-munition has high drag force, but the flight stability is still needed. In order to enhance the flight stability, two additional grid-fins are designed which modify web-thickness and numerical simulations of modified models are conducted. As the results, the thinnest web-thickness grid-fin has the highest flight stability and still maintains high drag coefficient. Based on these results, design of grid-fin adapted sub-munition is completed, the path trajectory of the sub-munition can be predicted with acquired aerodynamic datum and it is expected that grid fin can be used to various shape of the flight vehicle and bomb.

• The Journal of the Korea Contents Association
• /
• v.19 no.1
• /
• pp.524-534
• /
• 2019

This study was to analyze the students' engagement in regular curriculum and extra-curriculum and its effects on learning outcomes in higher education. Students' engagement was analysed by high order learning, reflective and integrative learning, learning strategies, collaborative learning, discussions with diverse others, and high impact activities. To achieve the purpose of this study, 392 students joined in K-NSSE were participated. To analyze the datum, frequency analysis, ANOVA, correlation analysis, and regression analysis were performed using IBM SPSS 25.0 program. The following results were obtained. First, students' engagement was generally very low, especially in high impact activities which has an effect on the students' achievement. And compared to the students' engagement in the college of humanity and social science, the students' engagement in engineering college were very low. Learning outcomes were influenced by the high impact activities, high-order learning, and discussions with diverse others. So to reinforce students' engagement in learning process, this study proposed a curriculum-extracurriculum integrated system. And to improvement students' engagement, teaching and learning support programs including high impact activities. high order learning, and discussions with diverse others were proposed to be developed and operated.

• Korean Journal of Remote Sensing
• /
• v.35 no.3
• /
• pp.433-446
• /
• 2019

Environmental impact assessment has been performed as preliminary assessment system in order to conserve environment value and minimize negative effect from development. Assessment based on data has been necessary to strengthen objectivity in process of Environmental impact assessment process. Furthermore extended use of spatial information in Environmental impact assessment system has been required through spatial information provided at government level and possibility connected with spatial information in Environmental impact assessment. However spatial information has not been systematically utilized in current Environmental impact assessment. Also the environmental impact assessment workers including assessment government employees, agencies of Environmental impact assessment document and review agencies lack an understanding in the concept of spatial information, so there is limit about their use to efficiently. In order to improve these limits in use of spatial information, this study suggested measures to standardize spatial information (coordinate and attribute table). To do so, based on coordinate and standards certified by the government, this study defined standard coordinates (GRS-80, central datum point, False East: 100000, False North: 200000) and established 9 default items. Lastly, the aforementioned standards were tested for actual environmental impact assessment projects. Standardization measures suggested in this study are expected to contribute to invigorate spatial information utilization in Environmental impact assessment and expand the scope of the assessment.

• Journal of The Geomorphological Association of Korea
• /
• v.18 no.2
• /
• pp.39-51
• /
• 2011

In this study, the shape of the Baramarae beach, Anmyeondo Area in West Coast of Korea and the changes in the sedimentation and erosion environment were analyzed in time series. As a result of the time series analysis of the shape of the Baramarae beach using aerial photographs from 1967 to 2009, the sand spit that developed in the southern part of Halmi Island was found to have had an EEN direction, but it was changed to a NNS direction, as reflected in the 2009 aerial photographs, as it gradually shifted to the west. In the onsite measurement, the H-3, H-4, H-5, and H-6 spots showed a superior sedimentation environment and the H-7, H-8, and H-9 spots showed a superior erosion environment. It was thus found that sedimentation is superior in the southwest beach and that erosion is superior in the northeast beach. The results in the spots between H-3 and H-6 indicate that the sand in the beach could not move to the northeast beach of Halmi Island due to the bank that had been established in the southwest beach of the island. On the other hand, it seems that superior erosion takes place in spots H-7 to H-9 in the northeast beach, where sand is not provided from the southwest beach of Halmi Island. It was found from the seasonal analysis that the season when superior sedimentation takes place in all the spots is autumn, and that the season when superior erosion takes place is summer. Superior sedimentation takes place in winter and spring in the southeast side and in summer in the northwest side.