• Proceedings of the KSRS Conference
• /
• 2002.10a
• /
• pp.750-750
• /
• 2002

The Airship PKNU is a roughly 12 m (32 ft) long blimp, filled with helium, whose two-gasoline power(3hp per engine) are independently radio controlled. The motors and propellers can be tilted and are attached to the gondola through an axle and supporting braces. Four stabilizing fins are mounted at the tail of the airship. To fill in the helium, a valve is placed at the bottom of the hull. The inaugural flight was on jul. 31.2002 at the Pusan, S.korea Most environment monitoring system\ problem use satellite image. But, Low resolution satellite image (multi-spectral) : 1km ∼ 250 m ground resolutions is lows. So, detail information acquisition is hard at the complex terrain. High resolution satellite image (black and white) 30m : The ground resolution is high. But it is high price, visit cycle and delivery time is long So. We want make high accuracy airship photogrammetry system. This airship can catch picture Multi. spectral Aerial photographing (visible, Near infrared and thermal infrared), and High resolution (over 6million pixel). It can take atmosphere datum (Temperature (wet bulb, dew point, general), Pressure (static, dynamic), Humidity, wind speed). this airship is very Quickness that aircraft install time is lower than 30 minutes, it is compact and that conveyance is easy. High-capacity save image (628 cut per 1time (over 6million and 4band(R,G,B,NIR)) and this airship can save datum this High accuracy navigatin (position and rotate angle) by DGPS tech. and Gyro system. this airship will do monitor about red-tide, sea surface temperate, and CH-A, SS and etc.

• Journal of Sasang Constitutional Medicine
• /
• v.20 no.3
• /
• pp.70-81
• /
• 2008

1. Objective Recently we have known 'First Impression' is the major factor to check the review point for the classification of sasangin. And we want to find out the objected data contribute to dignosis of female sasang constitution using Sasangins Face. 2. Methods We analysed the datum collected by multi-center researchers in 2007-2008. And this study analysed the datum of the measurement of the face by 3D-AFRA (3-Dimensional Automatic Face Recognition Apparatus) and the items of impression by SDQ. We used chi-square test to define the relationship between the item and sasang constitutions. We used independent samples t - test with classifying measuring variables of the face. 3. Results and Conclusion We put out specific female sasangin's constitutional measuring variables of face. The measuring variables of count is Taeyangin 30point, Soyangin 15point, Taeumin 32point, Soeumin 21point. There is the need to accumulate more accurate pictures about sasangin's external shape.

• Journal of Korean Society for Geospatial Information Science
• /
• v.22 no.3
• /
• pp.47-56
• /
• 2014

Recently, the velocity of sea-level rising has increased due to the global warming and the natural disasters have been occurred many times. Therefore, there are various demands for the integration of vertical reference datums for the ocean and land areas in order to develop a coastal area and prevent a natural disaster. Currently, the vertical datum for the ocean area refers to Local Mean Sea Level(LMSL) and the vertical datum for the land area is based on Incheon Mean Sea Level(IMSL). This study uses 31 points of Tidal Gauge Bench Mark (TGBM) in order to compares and analyzes the geometric heights referring LMSL, IMSL, and the nationally determined geoid surface. 11 points of comparable data are biased more than 10 cm when the geometric heights are compared. It seems to be caused by the inflow of river, the relocation of Tidal Gauge Station, and the topographic change by harbor construction. Also, this study analyze the inclination of sea surface which is the difference between IMSL and LMSL, and it shows the inclination of sea surface increases from the western to southern, and eastern seas. In this study, it is shown that TGBM can be used to integrate vertical datums for the ocean and land areas. In order to integrate the vertical datums, there need more surveying data connecting the ocean to the land area, also cooperation between Korea Hydrographic and Oceanographic Administration and National Geographic Information Institute. It is expected that the integrated vertical datum can be applied to the development of coastal area and the preventative of natural disaster.

• 한국문화재보존과학회:학술대회논문집
• /
• 2005.11a
• /
• pp.268-271
• /
• 2005

Sixty-four obsidian artifacts found in the Korean Peninsula have been characterised by a study of their minor elements and Sr isotope ratio. The artifacts are from the following locations: Yondaedo Island; Yokjido Island; Sangnodaedo Island, Tongyeong, Gyeongnam; Dongsamdong, Busan; Songdo Island, Yeosu, Jeonnam; Suyanggae, Danyang, Chungbuk; Sangmuyongri, Yanggu, Gangwondo; Paektusan Mountain; Kyushu region, Japan. The study of minor elements and Sr isotope ratio recognised three distinct major groups. This result suggests that there are no correlations among the three groups whose provenances are different. But as a result of classification using Sr isotope ratio, obsidian artifacts found in the southern part of the Korean Peninsula classified two groups within C group. This research will furnish scientific datum to be able to mutual comparison of obsidians excavated from other site.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2004.04a
• /
• pp.534-539
• /
• 2004

The coast is important area to set up policies in aspects of environmental, international and developing of resources. The researches and surveying have been conducted by many different organizations according to their own purposes. So the fundamental researches and surveying of Korean coastal area haven't been completed. For that reason, we can't use the datum to apply for different cases. In this paper, Ive studied about our current situations and the need of surveying. For a effective research methods, we suggest dividing research areas into zones and dividing them into smaller zones, And we divide priority of research and ranging of surveying classes by grading them depending on the importance.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2007.04a
• /
• pp.55-58
• /
• 2007

This study describes a problem of the Original Bench Mark which is used currently. We calculate New Mean Sea Level(MSL) in Incheon Port using tide data for 57 months and take 8 points GPS/Leveling data in research area. We calculate orthometric height of one control point using tide data and GPS/Leveling data. After fixed the control point, we decide final orthometric heights using relative geoidal height and ellipsoidal height from GPS survey. To analysis the Original Bench Mark compares final orthometric heights with the orthometric heights in Korea height system. We get the result that the New Original Bench Mark's height is 26.7176m. It appears 3.05cm difference as the Original Bench Mark's height is 26.6871cm in Korea height system.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2007.04a
• /
• pp.43-46
• /
• 2007

This paper focuses on examining and evaluating recent results of the national wide horizontal network adjustment which has carried out with respect to the Korean Geodetic Datum 2002 (KGD2002). To do this, 137 geodetic control points were observed by modem GPS technology. After processing all the observations, their outcomes are compared with ones provided by the national wide network adjustment. Results of GPS network show that RMSE is ${\pm}2.7cm\;and\;{\pm}6.5cm$ in horizontal and vertical component, respectively. On the other hand, ones from comparison with EDM network indicate that RMSE is ${\pm}3.0cm$ in horizontal component.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2007.04a
• /
• pp.47-50
• /
• 2007

Since world coordinate system is entirely used because of the revision of land surveying law, it is needed that transformation of coordinates of geo-spatial information established by korea coordinate system to be performed. It is required, however, to have a plan for transformation of world coordinate system because the coordinate system is not unified due to the geo-spatial information system using dualistic control data of both old and new data of korea coordinate system. For this purpose, in this study, I have calculated coordinate transformation coefficient per control data of korea coordinate system and proposed a plan of transforming a dualistic coordinate system which is based on control data of korea coordinate system effectively into world coordinate system through verification of accuracy of transformation per control data.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.8 no.4
• /
• pp.99-105
• /
• 1999

The flatness is the most important nature for the surface plates. For finding such a flatnes a surface plate is surveyed along a number of straight lines parallel to the edges of plate which form a grid pattern. Next the variations in height of the grid points are measured relative to a datum point. the relation between the number of such grid points and the flatuness of a measured surface plate is formulated in this study. In addtion it is found that the grid-point-numbers suggested by KS B 5254 and JIS B 7513 have very poor reliability for estimation of flatness incase of the surface plates with poor original flatness.

• Proceedings of the KSR Conference
• /
• 2011.10a
• /
• pp.3065-3072
• /
• 2011

PID Control Data Base creation device of DCU is safety operation technology of train door. For keeping the normal condition of door, measured value of regular condition and unusual(trouble detected) condition should be recorded by encoding. The door should be measured itself as this value is compared with standard vale. If it's condition of the door and for reaching the datum point and ot does self-diagnosis. This aim for Technical Realization is that carry out safety train operation by using the Estimation Data Base and protect before door-trouble.