• Journal of IKEEE
• /
• v.19 no.3
• /
• pp.415-423
• /
• 2015

The DO-178C guide, which is referenced as the software development guide when a certification of the airworthiness in the commercial airplane is acquired by FAA in US, is recently referenced for the local military aircraft airworthiness. This indicates that when the auditor of the military aircraft airworthiness looks over the software development documents, the auditor reviews if all of the documents are verified in accordance with the DO-178C guide. However, when we developed the military aircraft intercom, We developed its control software in accordance with the CMMI level 3, since there were no requirements for the compliance of the DO-178C guide. Therefore, When we consider the airworthiness of this intercomm system, The analysis for how much the software development based on the CMMI level 3 is different from the DO-178C guide is needed to prepare the essential software documents additionally. Thus, This study analyzes the differences between CMMI level 3 and DO-178C guide and provides that which data on the CMMI level 3 is necessary for the compliance of the aircraft airworthiness comparing with the DO-178C. The analyzed result can be applied at the software development of the other military aircraft avionics equipment based on the CMMI model environment considering the compliance of the military aircraft airworthiness.

• Journal of Digital Convergence
• /
• v.18 no.12
• /
• pp.267-278
• /
• 2020

ESS is an essential requirement for resolving power shortages and power demand management and promoting renewable energy at a time when the energy paradigm changes. In this paper, we propose a cost-effective ESS Peak-Shaving operation plan through load and solar power generation forecast. For the ESS operation plan, electric load and solar power generation were predicted through RMS, which is a statistical measure, and a target load reduction guideline for one hour was set through the predicted electric load and solar power generation amount. The load and solar power generation amount from May 6th to 10th, 2019 was predicted by simulation of load and photovoltaic power generation using real data of the target customer for one year, and an hourly guideline was set. The average error rate for predicting load was 7.12%, and the average error rate for predicting solar power generation amount was 10.57%. Through the ESS operation plan, it was confirmed that the hourly guide-line suggested in this paper contributed to the peak-shaving maximization of customers.Through the results of this paper, it is expected that future energy problems can be reduced by minimizing environmental problems caused by fossil energy in connection with solar power and utilizing new and renewable energy to the maximum.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.17 no.2
• /
• pp.102-108
• /
• 2003

This paper presents a new Data acquisition system that can improve a accuracy and response characteristics by designing a SDAS(Signal Datat Acquisition System). I&C(Instrumentation and Control) system, which it applied for Nuclear Power Plant, affects for safety either directly or indirectly. It should be assessed by the equipment qualification procedure to confirm the functionality during design life before it apply on the nuclear power plant depending on safety classification. This paper proposes data acquisition system that required as an essential measurement equipment in the method and procedure of equipment qualification following of standards and codes of IEEE and Nuclear Regulatory Guide. It provides comparable and experimental studies have been carried out. The presented results from the above investigation show considerably improved accuracy performance in the data acquisition system. This circuit will be able to be used in high performance I&C system.

• Journal of the Korean Society of Safety
• /
• v.34 no.2
• /
• pp.48-55
• /
• 2019

For preventing the accidents generated from the chemical materials, thus far, MSDS (Material Safety Data Sheet) data have been made to notify how to use and manage the hazardous and chemical materials in safety. However, it is difficult for users who handle these materials to understand the MSDS data because they are only listed based on the alphabetical order, not based on the specific factors such as similarity of characteristics. It is limited in representing the types of chemical materials with respect to their characteristics. Thus, in this study, a lots of MSDS data are visualized based on relationships of the characteristics among the chemical materials for supporting safety managers. For this, we used the textmining algorithm which extracts text keywords contained in documents and the Self-Organizing Map (SOM) algorithm which visually addresses textual data information. In the case of Occupational Safety and Health Administration (OSHA) in the United States, the guide texts contained in MSDS documents, which include use information such as reactivity and potential risks of materials, are gathered as the target data. First, using the textmining algorithm, the information of chemicals is extracted from these guide texts. Next, the MSDS map is developed using SOM in terms of similarity of text information of chemical materials. The MSDS map is helpful for effectively classifying chemical materials by mapping prohibited and hazardous substances on the developed the SOM map. As a result, using the MSDS map, it is easy for safety managers to detect prohibited and hazardous substances with respect to the Industrial Safety and Health Act standards.

• Journal of Korean Society for Atmospheric Environment
• /
• v.16 no.E
• /
• pp.59-68
• /
• 2000

In this paper Various aerosol cyclones that are developed recently form Kwangju Institute of Science and Technology(KJIST) for increasing collection efficiency or for decreasing pressure drop are reviewed. For the first time, new sets of experimental data are reported on the particle collection efficiency of cyclones with modified surface bodies namely, spiral guide body, circumferential groove body, and vertical groove body. Multi-cylinder cyclones by adding one or two additional cylindrical walls into the conventional cyclone are also described. Ad an attempt to increase the collection efficiency of small particles, electrocyclone using an externally applied electric field was designed and operated. In addition, factors affecting the cyclone performance were studied including flowrate, body and outlet sizes, cyclone dust outlet, and gas property.

• Korean Journal of Computational Design and Engineering
• /
• v.8 no.1
• /
• pp.27-34
• /
• 2003

In this paper, a redesign of an existing computer case is Proposed by applying some guide lines of assembly and disassembly which have positive effects on environment. Some problems such as Increase of number of disassembly and vibration, and unfittable difficulty in assembly and disassembly of coy-ers are recognized through analysis of geometrical structure in view of both assembly and disassembly. A solution of these problems is proposed by ideas of positive environmental influence through ease of assembly and disassembly. Design for Environment Software is used to evaluate both redesigned and existing products. Time of assembly and disassemb]y and MET-point are especially calculated by the software, and these data give us a good guide for analysis of ease of assembly, ease of disassembly and environmental influence in both products.

• Proceedings of the Korean Institute of Interior Design Conference
• /
• 2004.05a
• /
• pp.145-149
• /
• 2004

This cases are designated to examine various respect of space program in a museum which are focused on 32 exhibition unit space among the 9 case studies of public museum. Therefore, this study cases offer comprehension of a character and trend about exhibition space through the analysis and classification. Also, through setting up the guide line for the classification of exhibition unit space, the intention of the case study is the use of the case study as guide line and offer the basic data of exhibition space for consideration of exhibition act and moving line caused by the exhibition unit space type.

• Proceedings of the Korean Society Of Semiconductor Equipment Technology
• /
• 2007.06a
• /
• pp.174-178
• /
• 2007

The cleaning process to remove small particles, ions, and other polluted sources is one of the major parts in the recent semiconductor industry because it can cause fatal errors on the quality of the final products. According to the other reports, the major factors of bath's fluid motion are the cleaning method, nozzle, the geometry (of bath, guide and wafer), and the position (of guide and wafer). So to enhance cleaning efficiency in the bath, these factors must be controlled. The purpose of this study is to analyze and visualize fluid motion in the cleaning bath as basic data for designing the nozzle system and finding the process control parameters. For that, we used the general CFD code FLUENT.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2000.11a
• /
• pp.344-347
• /
• 2000

In this paper, a redesign of computer case is proposed by applying some guide lines of assembly and disassembly to an existing computer case. Some problems such as increase of number of disassembly and vibration, difficult assembly and disassembly from unfittable covers are recognized through analysis of geometrical structure and practical assembly and disassembly. A solution of these problems is proposed through ideas of ease of assembly and disassembly. Design for Environment Software is used to evaluate both redesigned and existing products. Time of assembly and disassembly and MET-point are especially calculated by the software, and these data give us a good guide for analysis of ease of assembly, ease of disassembly and environmental influence in both products.

• Archives of design research
• /
• v.21
• /
• pp.67-74
• /
• 1997

Marketing communication is becoming a critical element in today's competive retail environment. Consumers are better educated and discriminating in their choices. Especially, now in the totally opened Korean market situation, establishing proper retail marketing strategy faces many challenge and require special attention. In this study, various promotion media application strategies are mentioned in order to help retailers who need to develop their own promotion plan. Among the media mix, xisual merchandising is becoming effective communication system for retail promotion. Because of its complex development process, retailers and professionals both need to understand the theoretical background of VMD and application method. As a guide in developing systems for each use, it might have some limitations due to the method of research and data related to researcher's choice. In spite of above mentioned limitations, this study will serve as a practical guide for the retailers who wishes to achieve marketing goals in order to survive in this competitive retail situation.