• 한국독성학회:학술대회논문집
• /
• 한국독성학회 2005년도 추계학술대회
• /
• pp.47-75
• /
• 2005

• ETRI Journal
• /
• 제29권2호
• /
• pp.201-211
• /
• 2007

This paper focuses on the scheduling problem with the objective of maximizing system throughput, while guaranteeing long-term quality of service (QoS) constraints for non-realtime data users and short-term QoS constraints for realtime multimedia users in multiclass service high-speed uplink packet access (HSUPA) systems. After studying the feasible rate region for multiclass service HSUPA systems, we formulate this scheduling problem and propose a multi-constraints HSUPA opportunistic scheduling (MHOS) algorithm to solve this problem. The MHOS algorithm selects the optimal subset of users for transmission at each time slot to maximize system throughput, while guaranteeing the different constraints. The selection is made according to channel condition, feasible rate region, and user weights, which are adjusted by stochastic approximation algorithms to guarantee the different QoS constraints at different time scales. Simulation results show that the proposed MHOS algorithm guarantees QoS constraints, and achieves high system throughput.

• 한국멀티미디어학회논문지
• /
• 제10권12호
• /
• pp.1612-1621
• /
• 2007

In this paper, we introduced our designed TDMA (Time Division Multiple Access) based MAC (Medium Access Control) protocol for Home Networks called HomeTDMA. We have implemented and tested it in a test bed using crossbow motes and TinyOS. We also have compared HomeTDMA and CSMA (Carrier Sense Multiple Access) in terms of space and time complexity, channel access time, delivery success ratio, and throughput. Based on our results, HomeTDMA has an advantage over CSMA on channel access time, throughput and delivery success ratioIn the case of complexity, HomeTDMA is more complex compared to CSMA. Thus, CSMA is more appropriate in wireless sensor networks (WSNs) where memory, energy, and throughput are important parameters to be considered. However, HomeTDMA has a natural advantage of collision free medium access and is very promising for home networks where a reliable transmission or data transfer and congestion control is highly preferred.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년 학술대회 논문집 정보 및 제어부문
• /
• pp.467-469
• /
• 2006

In wireless network environments, as users' demands on high-speed data communications due to increase of multi-media services, the necessity of new high-speed WLAN technologies has appeared. Nowaday, IEEE is standardizing a new WLAN protocol caned as IEEE 802.11n. To effectively use wireless resources, IEEE 802.11n introduces MAC aggregation function which is similar to that in IEEE 802.11e. In case of transmitting several frames without MAC aggregation, the frames include individual frame header and trailer, and their corresponding acknowledgement frames can appear on wireless link. However, if they are aggregated into single MAC frame, we can reduce the number of used bits due to frame headers/trailers and also remove redundant acknowledgement frames. In this paper, we explain two different MAC frame aggregation methods for IEEE 802.11e and IEEE 802.11n and evaluate their throughput by simulations.

• ETRI Journal
• /
• 제34권1호
• /
• pp.98-101
• /
• 2012

The directional medium access control (MAC) protocol improves the throughput of mobile ad hoc networks but has a deafness problem and requires location information for neighboring nodes. In the dual-channel directional MAC protocol [12], the use of omnidirectional packets does not require the exact location of destination node. In this letter, we propose a tone dual-channel MAC protocol with directional antennas to improve the throughput of mobile ad hoc networks. In the proposed MAC protocol, we use a directional CTS and an out-of-band directional DATA tone with a new blocking algorithm to improve the spatial reuse. We confirm the throughput performance of the proposed MAC protocol by computer simulations using the Qualnet simulator.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제11권3호
• /
• pp.1319-1335
• /
• 2017

This paper proposes an opportunistic reporting-based sensing-reporting-throughput optimization scheme that maximizes the spectral efficiency of secondary users (SUs) in cooperative cognitive radio networks with a soft combining rule. The performance of cooperative spectrum sensing depends on the sensing time, the reporting time of transmitting sensing results, and the fusion scheme. While longer sensing time and reporting time improve the sensing performance, this shortens the allowable data transmission time, which in turn degrades the spectral efficiency of SUs. The proposed scheme adopts an opportunistic reporting scheme to restrain the reporting overhead and it jointly controls the sensing-reporting overhead in order to increase the spectral efficiency of SUs. We show that there is a trade-off between the spectral efficiency of SUs and the overheads of cooperative spectrum sensing. The numerical results demonstrate that the proposed scheme significantly outperforms the conventional sensing-throughput optimization schemes when there are many SUs. Moreover, the numerical results show that the sensing-reporting time should be jointly optimized in order to maximize the spectral efficiency of SUs.

• 전기전자학회논문지
• /
• 제1권1호
• /
• pp.176-184
• /
• 1997

The Asynchronous Transfer Mode(ATM) networks are being adopted as backbones over various parts of Internet. Also, TCP is one of the most widespread transport protocols, nowdays. It can be used with ATM. But, TCP shows poor end-to-end performance on ATM networks. Effective throughput of TCP over ATM can be quite low when cells are dropped at the congested ATM switch. The low throughput is due to wasted bandwidth as congested link transmits cells from corrupted packets. This paper examines the behavior of TCP over ATM with limited bandwidth in a broadband environment. As multiple VBR sources occupies most of the available bandwidth, there has been a starvation effect, so TCP sources couldn't get the chance of transmitting data. Also, throughput is proportional to the amount of buffer.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2001년도 춘계학술대회 논문집(한국공작기계학회)
• /
• pp.28-33
• /
• 2001

Screw conveyors are used extensively in industrial for conveying and elevating materials. Despite their apparent simplicity, the mechanics of the conveying action is very complex. so many engineers depend on experiential data. Capacities of screw are pumping, steady flow of polymer melts, steady volumetric throughput etc. they are affected by geometry of screw, heat flux, pressure on inside barrel, rotating velocity, friction coefficient at screw surface etc. by computation volumetric efficiency increases as rotating velocity increases and decreases as friction coefficient increases. also it decreases with short pitch length. and double flight screw is more effective than single flight screw. The temperature of polymer melts by heating pad and injection pressure play a very important role in the injection molding machine. so in this paper we analyze thermal distortion and stress of screw includes pressure and temperature distributions by finite element analysis to understand what design factors influence on volumetric throughput efficiency of the screw and thermo-mechanical characteristics of screw.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제8권11호
• /
• pp.3731-3750
• /
• 2014

This paper considers a wideband cognitive radio network (WCRN) which can simultaneously sense multiple narrowband channels and thus aggregate the detected available channels for transmission and studies the ergodic throughput of the WCRN that operated under: the wideband sensing-based spectrum sharing (WSSS) scheme and the wideband opportunistic spectrum access (WOSA) scheme. In our analysis, besides the average interference power constraint at PU, the average transmit power constraint of SU is also considered for the two schemes and a novel cognitive radio sensing frame that allows data transmission and spectrum sensing at the same time is utilized, and then the maximization throughput problem is solved by developing a gradient projection method. Finally, numerical simulations are presented to verify the performance of the two proposed schemes.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2006년도 하계종합학술대회
• /
• pp.533-534
• /
• 2006

This paper presents the architecture design of a high-speed, low-complexity 128-point radix-$2^4$ FFT processor for ultra-wideband (UWB) systems. The proposed high-speed, low-complexity FFT architecture can provide a higher throughput rate and low hardware complexity by using 2-parallel data-path scheme and single-path delay-feedback (SDF) structure. This paper presents the key ideas applied to the design of high-speed, low-complexity FFT processor, especially that for achieving high throughput rate and reducing hardware complexity. The proposed FFT processor has been designed and implemented with the 0.18-m CMOS technology in a supply voltage of 1.8 V. The throughput rate of proposed FFT processor is up to 1 Gsample/s while it requires much smaller hardware complexity.