• 제목/요약/키워드: Data storage

검색결과 4,537건 처리시간 0.044초

반고형 식품류의 정상유동특성 및 동적 점탄성 (Steady Shear Flow and Dynamic Viscoelastic Properties of Semi-Solid Food Materials)

  • 송기원;장갑식
    • 유변학
    • /
    • 제11권2호
    • /
    • pp.143-152
    • /
    • 1999
  • 본 연구에서는 Rheometrics Fluids Spectrometer(RFS II)를 사용하여 세 종류의 상용 반고형 식품(마요네즈, 토마토 케찹, 와사비)의 정상유동특성 및 소진폭 전단변형하에서의 동적 점탄성을 광범위한 전단속도와 각주파수 영역에서 측정하였다. 이들 측정결과로부터 정상유동특성의 전단속도 의존성 및 동적 점탄성의 각주파수 의존성을 보고하였다. 그리고 항복응력의 항을 갖는 몇 가지 점소성 유동모델을 사용하여 정상유동특성을 정량적으로 평가하고 이들 모델의 적용성을 비교.검증하였다. 나아가서 수정된 형태의 지수법칙 관계식을 도입하여 정상유동특성(비선형 거동)과 동적 점탄성(선형 거동)간의 상관관계에 대해 검토하였다. 이상의 연구를 통해 얻어진 결과를 요약하면 다음과 같다. (1) 반고형 식품류는 상당한 크기의 항복응력을 갖는 점소성 물질로서 전단속도가 증가할수록 정상류점도가 급격히 감소하는 shear-thinning 거동을 나타낸다. (2) Herschel-Bulkley 모델, Mizrahi-Berk 모델 및 Heinz-Casson 모델은 반고형 식품류의 정상유동거동을 잘 기술할 수 있다. 이들 중에서도 Heinz-Casson 모델이 가장 우수한 적용성을 갖는다 (3) 반고형 식품류는 임계 전단속도를 경계로 shear-thinning 특성이 변화한다. 즉 낮은 전단속도에 비해 높은 전단속도 영역에서 분산입자 응집체의 구조파괴가 더욱 활발하게 진행되어 보다 현저한 shear-thinning 특성을 나타낸다. (4) 저장 탄성률 및 손실탄성률은 양자 모두 각주파수가 증가할수록 점차로 증가하나 각주파수 의존성은 그다지 크지 않다. 또한 광범위한 각주파수 영역에서 탄성적 성질이 점성적 성질에 비해 보다 우세하게 나타난다. (5) 정상류점도, 동적점도 및 복소점도는 모두 power-law 모델의 거동을 잘 만족한다. 또한 정상유동특성과 동적 점탄성간의 상관관계는 수정된 형태의 지수법칙 관계식에 의해 잘 기술될 수 있다.

  • PDF

도서관경영(圖書館經營)에 있어서의 시스팀 분석기법응용(分析技法應用)에 관한 연구(硏究) (A Study on Systems Analysis Applied to Library Management)

  • 권기원
    • 한국비블리아학회지
    • /
    • 제2권1호
    • /
    • pp.178-210
    • /
    • 1974
  • It needs to put into practice the systems analysis in the analysis of some operations and status of library for the purpose of systematizing the work of reforming in the new easier form to process, to storage, to retrieve and to make use of the increasing informations and data of library. In this study, some of systems which are generally using in every library was caught in the case study of K university library. Having analyzed them with the two methods of the flowcharting and mathematical analysis, we found the obstructive factors in operation. As the result of this research, it was gained the new system as the alternative one. A. Alternative System B. Advantages of alternative systems 1. In the reference room When it converts the present system into the new system, it can profit 6.771 won/user (13.815won-7.044won=6.771 won). Therefore, a half the average required cost of the present system can be saved. If this saving would be alloted for the cost 33,000won required to make the cataloging cards, it would be taken for 94 days (33,000 won ${\div}$ 6,771 won/user=4,874users. 4,874users ${\div}$ 52users/day=94days) to get it. The saving cost/year by the new system will be 95,417 won, and in the first year the initial cost (33,000won) reduces the saving cost to 62,417won. 2. In the periodical room The average required time for using the materials of the present system is 17 minutes/user and the average required cost/user is 23.775won, while the average required time of the new system is 4 minutes and the average required cost/user is 5.33won. Therefore, the new system has profit 4 times of the present system. Accordingly, it occurs when the dispersed periodical materials get together. 3. In the classification and cataloging When one processes - the oriental books - by the Linear Programming Technique, the maximum of the process can be increased from 11.6 volumes per librarian of the present system to 12 volumes per librarian of the new system increased 0.4 volume in a day, and cataloging by the manual printer can be shorten from 3 minutes per card of the present system to 1.5 minutes per card of the new system. Consequently, we can complete the other operations (books equipment, updating of cataloging cards, etc.) with 141 minutes which are saved in the course of the afore-mentioned works. 4. In the status of collections The average growth rate of 4 years from 1968 to 1971 is 9.825 %, and that of the purchased materials is 6.2% similar to the advanced nations, but it has the different position from 215,000 volumes by the Standard Degree for Establishment of College and University, and the difference between the total collections 151,671 volumes and Dunns' growth model ($N_t=N_oe^{-at}$) claimed by Leimkuhler 155,297 volumes in 1971 is 3,626 volumes, and for the purpose of compensation the difference, we found the fact that it needs to have the increased budget of 24~30% per year, Thus, if the budget of 24~30 % per year. Thus, if the budget would be increased per year as the rate of the afore-mentioned figure, it would be reached at the Standard Degree for Establishment of College and University in 1975, and thereafter, it can be decreased to the lebel which is able to maintain the growth rate of 5~6% per year.

  • PDF

김밥에서의 Staphylococcus aureus에 대한 정량적 미생물위해평가 모델 개발 (Quantitative Microbial Risk Assessment Model for Staphylococcus aureus in Kimbab)

  • 박경진;오덕환;하상도;박기환;정명섭;천석조;박종석;우건조;홍종해
    • 한국식품과학회지
    • /
    • 제37권3호
    • /
    • pp.484-491
    • /
    • 2005
  • 정량적 미생물 위해평가(Quantitative microbial risk assessment: QMRA)는 국민건강에 영향을 주는 잠재된 위해를 연구하여 식품내 존재하는 병원성미생물과 관련한 위해를 체계적으로 평가하는 것이다. 본 연구는 깁밥에서의 Staphylococcus aureus에 대한 QMRA 모델을 개발하고 이를 식품위생관리에서 이용할 수 있는 기준을 제시하여, 식품안전 분야에서의 QMRA의 필요성과 활용성을 알리기 위해서 실시하였다. QMRA 모델은 매장에서부터 최종소비에 이르기까지 4 단계로 구성되었으며, 미생물 성장모델과 조사자료 그리고 확률분포가 김밥의 최종소비에서의 S. aureus 수준을 평가하기 위하여 이용되었다. S. aureus에 대한 양-반응모델이 없는 관계로 최종 소비단계에서의 S. aureus의 오염수준을 잠재적인 위해를 결정하는데 이용하였다. 이를 위하여 5 log CFU/g이상을 잠재적 유해수준으로 가정하였으며, 시뮬레이션 결과 최종 소비되는 김밥에서 이 유해수준을 초과할 가능성은 30.7%로 나타났다. 김밥에서의 S. aureus의 오염수준은 평균 2.67 log CFU/g으로 나타났으며, 민감도 분석에서는 매장에서의 김밥 보관온도 및 시간이 가장 중요한 요인으로 결정되었다. 이러한 결과를 종합하여 볼 때 김밥 매장에서는 현실적으로 보존시간 관리가 어렵다고 한다면 보관온도를 $10^{\circ}C$ 이하로 유지하는 것이 가장 중요한 것으로 나타났다. 본 연구에서와 같이 QMRA는 식품 내 존재할 수 있는 잠재적인 위해에 영향을 미치는 인자들에 대한 평가에 이용될 수 있으며 이를 식품위생관리에 직접적으로 활용 가능한 것으로 나타났다.삼의 분석방법별 기준인 ginsenoside -Rg1과 -Re의 함량비($Rg1/Re{\Leq}3.87$)에 부합되었다.도에서 MA 저해 효과는 쑥갓>미나리>참깨의 순으로, 각각 54, 48, 29%를 나타냈다. 참깨는 20, $100{\mu}g/mL$의 농도에서처럼 가장 작은 효과를 보여줬고, 쑥갓은 50% 이상의 항산화 효과를 나타냈다. Aldehyde/Carboxylic acid assay에서는 참깨가 가장 높은 효과를 보여줬지만 Lipid MA asaay에서는 그에 비해 가장 낮은 효과를 나타냈다.안전한 수준인 것으로 판단된다. 보여진다.ificantly more inclusive. As a result of the evolution of new fibers, materials, processes and markets, we assert that a new "ENGINEERING WITH FIBERS" (EwF)(중략)web.cnu.ac.kr/~fabric이다. 제작된 멀티미디어를 실제 수업에 활용한 결과 수강생(32명)의 96.9%가 보조자료로 사용된 멀티미디어 콘텐츠자료가 실험관련 교과목 수업에 효과적이라고 응답하였고, 87.5%가 활용된 멀티미디어 콘텐츠 자료에 만족하며, 75%가 기존의 교과서와 비교하여 더 많이 활용하였다고 응답하였다. 따라서 멀티미디어 콘텐츠를 활용한 교육은 개인차에 따른 개별화 학습을 가능하게 할 뿐만 아니라 능동적인 참여를 유도하여 학습효율을 높일 수 있을 것으로 기대된다.향은 패션마케팅의 정의와 적용범위를 축소시킬 수 있는 위험을 내재한 것으로 보여진다. 그런가 하면, 많이 다루어진 주제라 할지라도 개념이나 용어가 통일되지

과숙김치의 생물.화학적 특성 (Characterization of Biological Chemistry from Over Ripened Kimchi)

  • 문영자;백경아;성창근
    • 한국식품영양학회지
    • /
    • 제14권6호
    • /
    • pp.512-520
    • /
    • 2001
  • 한국의 대표적인 전통식품 중 하나인 김치의 발효시 문제가 되고 있는 저장성과 미생물의 과도 성장으로 인한 부패를 지연시키기 위한 방법을 모색하고자 과숙김치의 pH와 산도, 유기산, 효소활성 등의 이화학적 특성과 미생물학적 특성을 살펴 본 결과는 다음과 같다. 1. 김치의 발효초기단계에 pH는 급격히 감소하다가 산도가 0.5% 부근일 때부터 완만한 감소를 보였고 반면에 산도는 초기에는 완만히 증가하다가 pH가 4부근일 때부터 발효미생물의 영향으로 급격한 증가를 보였다. 2. 김치의 숙성과정시 생성되는 유기산은 oxalic acid, lactic acid, acetic acid, malic acid, succinic acid 등 이며, GC-MSD로 확인 작업을 하였다. 유기산들 중 lactic acid가 발효기간 중 가장 큰 변화를 보였으며, malic acid는 저장기간이 경과함에 따라 감소하였다. 3. 과숙김치에서 산도가 0.75%인 kimchi A의 acidic protease activity, lipase activity가 가장 높았고, Amylase activity는 산도 0.95%인 kimchi C가 가장 높았다. 4. 5가지 과숙김치 각각(A, B, C, D, E순으로)의 총균에서는 8.1$\times$$10^{5}$ , 4.7$\times$$10^4$, 1.2$\times$$10^3$, 3.2$\times$$10^4$, 4.9$\times$$10^{5}$ (CFU/ml)를 나타내었다. 유산균수는 1.0$\times$$10^{5}$ , 1.3$\times$10s, 1.2$\times$$10^3$, 2.3$\times$ $10^3$, 2.1$\times$$10^4$(CFU/ml)이 었다. 또한, 초산균수는 1.8$\times$$10^{5}$ , 9.3$\times$$10^4$, 7.0$\times$$10^1$, 4.5$\times$$10^4$, 5.3$\times$$10^3$(CFU/ml)으로 계수되었다.

  • PDF

레토르트파우치 식품의 가공 및 품질안정성에 관한 연구 (5) 레토르트파우치 조미피조개제품의 제조 및 품질안정성 (Studies on Processing and Keeping Quality of Retort Pouched Foods (5) Preparation and Keeping Quality of Retort Pouched Seasoned Ark Shell)

  • 이응호;오광수;안창범;이태헌;정영훈;신건진;김우준
    • 한국수산과학회지
    • /
    • 제19권2호
    • /
    • pp.109-117
    • /
    • 1986
  • 피조개를 보다 효율적으로 이용하기 위해 상온유통이 가능하며 즉석식품으로 이용할 수 있는 레토르트파우치 조미피조개제품을 제조하기 위한 가공조건 및 저장 중의 품질안정성에 대하여 실험하였다. 동결한 피조개족육(足肉)을 해동한 다음 원료에 대해 솔비톨 $10.0\%$, 식염 $2.0\%$, 글루탐산나트륨 $0.5\%$로 된 혼합조미료를 살포, 혼합하여 $5^{\circ}C$, 10시간 조미한 다음 $45^{\circ}C$, 4시간 건조하였다. 건조 후 조미제품의 품질향상을 위해 $1\%$ 알긴산소오다용액에서 침지, 피복처리하여 이것을 2시간 동안 냉풍건조시킨 후 적층플라스틱필름주머니(polyester/casted polypropylene= $12{\mu}m/70{\mu}m,\;15{\times}16cm$)에 $45{\sim}50g$씩 충전, 진공포장하여 열수순환식 레토르트에서 Fo 값 6.0이 되도록 $121^{\circ}C$, 10분간 가열살균하는 것이 가장 좋았다. 이 조건하에서 제조된 제품은 가온검사결과 미생물의 증식은 없었으며 제품의 외관도 이상이 없었다. 원료피조개 및 레토르트파우치 조미피조개제품의 주요구성지방산은 16:0, 20:5, 22:6, 18:0 및 18:3이었고, 유리아미노산 중 함량이 많은 아미노산은 lysine, arginine, glycine, alanine, glutamic acid 및 leucine이었다. 그리고 핵산관련물질로서는 원료피조개 및 제품에 있어서 AMP의 함량이 가장 많았으며 유리아미노산, 베타인, 핵산관련물질 등이 원로피조개 및 제품 엑스분의 주성분을 이루고 있었다. 건조, 살균 등의 제품 제조공정을 통해 20:5 및 22:6 등 불포화산의 조성비는 다소 감소하는 반면, 포화산은 약간 증가하는 경향을 나타내었고 전엑스분질소의 함량은 약 1/2 정도 감소하였다. 제품을 상온에 100일간 저장하여 두고 품질안정성을 검토한 결과 저장 100일째까지 품질의 저하는 거의 없었으며, 알긴산소오다용액으로 피복처리를 함으로서 제품의 품질을 향상시킬 수 있다는 결론을 얻었다.

  • PDF

해양식량자원의 가공조건별 영양적 품질평가 -1. 가열 및 저장조건에 따른 수산연제품의 단백질 품질변화- (Effects of Processing Conditions on the Nutritional Quality of Seafood -1. Effects of Heating and Storage Conditions on Protein Quality of Surimi Products-)

  • 류홍수;문정혜;박정현
    • 한국수산과학회지
    • /
    • 제27권3호
    • /
    • pp.282-291
    • /
    • 1994
  • 영양적으로 우수한 수산연제품 제조를 위한 가공조건을 알아보기 위하여 산업적으로 채택되고있는 가열 공정에 따른 제품의 단백질 품질을 점검하고, 제품가공에 사용되는 여러 첨가물들이 단백질 품질에 미치는 영향을 검토하였다. 또한 우리나라 주요 수산가공 회사들이 생산한 연제품의 저장수명을 알아보기 위하여 저장온도에 따른 품질안정성을 실험하였다. 1. 연육에 대하여 전분첨가량이 $5\%$ 이면서 첨가수량이 $33\%$ 정도인 어묵의 단백질 품질이 가장 좋았다. 가열 처리 전 보다 가열처리 후가 소화율은 비슷하지만, 단백효율비는 훨씬 높았으며 소화저해물질은 어묵 제조과정 중 원료육에 있었던 총량의 $90\%$ 이상이 소실 되어 단백질 품질에는 큰 영향을 미치지 않았다. 2. 해산물 추출물의 경우 연육에 대해 $2\%$ 정도 첨가하여도 소화율은 변화하지 않았지만, 효소활성저해제로서의 역할이 커서 $1\%$ 정도가 바람직할 것으로 생각되었다. 3. $40^{\circ}C$에서는 25분으로 가열한뒤 $95^{\circ}C$에서 10분간 2단가열을 시도하면 소화율이 높은 어묵제품을 만들 수 있었다. 4. 시판 찐어묵류 및 게맛살류의 단백질 소화율은 $86{\sim}88\%$$87{\sim}89\%$ 범위였고 단백효율비는 $2.8{\sim}2.9$(찐어묵) 및 $2.9{\sim}3.2$(게맛살)의 범위였으며, 회사별에 따라 차이가 컸었다. 5. 시판 맛살류를 $4^{\circ}C$에서 저장할 때 15일 경과 후에는 거의 부패단계에 이르렀고 찐어묵은 $4^{\circ}C$에서 20일, $15^{\circ}C$에서는 5일까지 저장성이 있었다.

  • PDF

태양에너지를 이용한 곡물건조시스템의 시뮬레이션에 관한 연구 (Simulation of Drying Grain with Solar-Heated Air)

  • 금동혁;김용운
    • Journal of Biosystems Engineering
    • /
    • 제4권2호
    • /
    • pp.65-83
    • /
    • 1979
  • Low-temperature drying systems have been extensively used for drying cereal grain such as shelled corn and wheat. Since the 1973 energy crisis, many researches have been conducted to apply solar energy as supplemental heat to natural air drying systems. However, little research on rough rice drying has been done in this area, especially very little in Korea. In designing a solar drying system, quality loss, airflow requirements, temperature rise of drying air, fan power and energy requirements should be throughly studied. The factors affecting solar drying systems are airflow rate, initial moisture content, the amount of heat added to drying air, fan operation method and the weather conditions. The major objectives of this study were to analyze the effects of the performance factors and determine design parameters such as airflow requirements, optimum bed depth, optimum temperature rise of drying air, fan operation method and collector size. Three hourly observations based on the 4-year weather data in Chuncheon area were used to simulate rough rice drying. The results can be summarized as follows: 1. The results of the statistical analysis indicated that the experimental and predicted values of the temperature rise of the air passing through the collector agreed well. 2. Equilibrium moisture content was affected a little by airflow rate, but affected mainly by the amount of heat added, to drying air. Equilibrium moisture content ranged from 12.2 to 13.2 percent wet basis for the continuous fan operation, from 10.4 to 11.7 percent wet basis for the intermittent fan operation respectively, in range of 1. 6 to 5. 9 degrees Centigrade average temperature rise of drying air. 3. Average moisture content when top layer was dried to 15 percent wet basis ranged from 13.1 to 13.9 percent wet basis for the continuous fan operation, from 11.9 to 13.4 percent wet basis for the intermittent fan operation respectively, in the range of 1.6 to 5.9 degrees Centigrade average temperature rise of drying air and 18 to 24 percent wet basis initial moisture content. The results indicated that grain was overdried with the intermittent fan operation in any range of temperature rise of drying air. Therefore, the continuous fan operation is usually more effective than the intermittent fan operation considering the overdrying. 4. For the continuous fan operation, the average temperature rise of drying air may be limited to 2.2 to 3. 3 degrees Centigrade considering safe storage moisture level of 13.5 to 14 perceut wet basis. 5. Required drying time decrease ranged from 40 to 50 percent each time the airflow rate was doubled and from 3.9 to 4.3 percent approximately for each one degrees Centigrade in average temperature rise of drying air regardless of the fan operation methods. Therefore, the average temperature rise of drying air had a little effect on required drying time. 6. Required drying time increase ranged from 18 to 30 percent approximately for each 2 percent increase in initial moisture content regardless of the fan operation methods, in the range of 18 to 24 percent moisture. 7. The intermittent fan operation showed about 36 to 42 percent decrease in required drying time as compared with the continuous fan operation. 8. Drymatter loss decrease ranged from 34 to 46 percent each time the airflow rate was doubled and from 2 to 3 percent approximately for each one degrees Centigrade in average temperature rise of drying air, regardless of the fan operation methods. Therefore, the average temperature rise of drying air had a little effect on drymatter loss. 9. Drymatter loss increase ranged from 50 to 78 percent approximately for each 2 percent increase in initial moisture content, in the range of 18 to 24 percent moisture. 10. The intermittent fan operation: showed about 40 to 50 percent increase in drymatter loss as compared with the continuous fan operation and the increasing rate was higher at high level of initial moisture and average temperature rise. 11. Year-to-year weather conditions had a little effect on required drying time and drymatter loss. 12. The equations for estimating time required to dry top layer to 16 and 1536 wet basis and drymatter loss were derived as functions of the performance factors. by the least square method. 13. Minimum airflow rates based on 0.5 percent drymatter loss were estimated. Minimum airflow rates for the intermittent fan operation were approximately 1.5 to 1.8 times as much as compared with the continuous fan operation, but a few differences among year-to-year. 14. Required fan horsepower and energy for the intermittent fan operation were 3. 7 and 1. 5 times respectively as much as compared with the continuous fan operation. 15. The continuous fan operation may be more effective than the intermittent fan operation considering overdrying, fan horsepower requirements, and energy use. 16. A method for estimating the required collection area of flat-plate solar collector using average temperature rise and airflow rate was presented.

  • PDF

태양에너지를 이용한 곡물건조시스템의 시뮬레이션에 관한 연구 (Simulation of Drying Grain with Solar-Heated Air)

  • 금동혁
    • Journal of Biosystems Engineering
    • /
    • 제4권2호
    • /
    • pp.64-64
    • /
    • 1979
  • Low-temperature drying systems have been extensively used for drying cereal grain such as shelled corn and wheat. Since the 1973 energy crisis, many researches have been conducted to apply solar energy as supplemental heat to natural air drying systems. However, little research on rough rice drying has been done in this area, especially very little in Korea. In designing a solar drying system, quality loss, airflow requirements, temperature rise of drying air, fan power and energy requirements should be throughly studied. The factors affecting solar drying systems are airflow rate, initial moisture content, the amount of heat added to drying air, fan operation method and the weather conditions. The major objectives of this study were to analyze the effects of the performance factors and determine design parameters such as airflow requirements, optimum bed depth, optimum temperature rise of drying air, fan operation method and collector size. Three hourly observations based on the 4-year weather data in Chuncheon area were used to simulate rough rice drying. The results can be summarized as follows: 1. The results of the statistical analysis indicated that the experimental and predicted values of the temperature rise of the air passing through the collector agreed well.2. Equilibrium moisture content was affected a little by airflow rate, but affected mainly by the amount of heat added, to drying air. Equilibrium moisture content ranged from 12.2 to 13.2 percent wet basis for the continuous fan operation, from 10.4 to 11.7 percent wet basis for the intermittent fan operation respectively, in range of 1. 6 to 5. 9 degrees Centigrade average temperature rise of drying air.3. Average moisture content when top layer was dried to 15 percent wet basis ranged from 13.1 to 13.9 percent wet basis for the continuous fan operation, from 11.9 to 13.4 percent wet basis for the intermittent fan operation respectively, in the range of 1.6 to 5.9 degrees Centigrade average temperature rise of drying air and 18 to 24 percent wet basis initial moisture content. The results indicated that grain was overdried with the intermittent fan operation in any range of temperature rise of drying air. Therefore, the continuous fan operation is usually more effective than the intermittent fan operation considering the overdrying.4. For the continuous fan operation, the average temperature rise of drying air may be limited to 2.2 to 3. 3 degrees Centigrade considering safe storage moisture level of 13.5 to 14 perceut wet basis.5. Required drying time decrease ranged from 40 to 50 percent each time the airflow rate was doubled and from 3.9 to 4.3 percent approximately for each one degrees Centigrade in average temperature rise of drying air regardless of the fan operation methods. Therefore, the average temperature rise of drying air had a little effect on required drying time.6. Required drying time increase ranged from 18 to 30 percent approximately for each 2 percent increase in initial moisture content regardless of the fan operation methods, in the range of 18 to 24 percent moisture.7. The intermittent fan operation showed about 36 to 42 percent decrease in required drying time as compared with the continuous fan operation.8. Drymatter loss decrease ranged from 34 to 46 percent each time the airflow rate was doubled and from 2 to 3 percent approximately for each one degrees Centigrade in average temperature rise of drying air, regardless of the fan operation methods. Therefore, the average temperature rise of drying air had a little effect on drymatter loss. 9. Drymatter loss increase ranged from 50 to 78 percent approximately for each 2 percent increase in initial moisture content, in the range of 18 to 24 percent moisture. 10. The intermittent fan operation: showed about 40 to 50 percent increase in drymatter loss as compared with the continuous fan operation and the increasing rate was higher at high level of initial moisture and average temperature rise.11. Year-to-year weather conditions had a little effect on required drying time and drymatter loss.12. The equations for estimating time required to dry top layer to 16 and 1536 wet basis and drymatter loss were derived as functions of the performance factors. by the least square method.13. Minimum airflow rates based on 0.5 percent drymatter loss were estimated.Minimum airflow rates for the intermittent fan operation were approximately 1.5 to 1.8 times as much as compared with the continuous fan operation, but a few differences among year-to-year.14. Required fan horsepower and energy for the intermittent fan operation were3. 7 and 1. 5 times respectively as much as compared with the continuous fan operation.15. The continuous fan operation may be more effective than the intermittent fan operation considering overdrying, fan horsepower requirements, and energy use.16. A method for estimating the required collection area of flat-plate solar collector using average temperature rise and airflow rate was presented.

Trans 지방과 쌀, 콩을 첨가한 빵의 섭취가 건강한 성인 남녀의 혈장 지질 및 지방산 조성에 미치는 영향 (Effect of Breads Containing Trans Fat, Soybean or Rice on Plasma Lipid and Fatty Acid Composition in Healthy Korean Adults)

  • 노경희;허영;장지현;김소희;신진혁;김도훈;이승환;이경식;박용규;조경환;송영선
    • 한국식품영양과학회지
    • /
    • 제38권8호
    • /
    • pp.1042-1049
    • /
    • 2009
  • 본 연구는 서울지역에 거주하는 건강한 성인 남녀(남자 23명, 여자 10명) 33명을 대상으로 trans 지방 3.75 g을 첨가 한 쌀 빵, 콩 빵과 밀 빵의 섭취가 식후 혈장에서의 지방산과 지질흡수에 미치는 효과를 확인하기 위하여 실시하였다. 시험군은 각 군 당 11명씩 3군으로 분류하였다. 쌀 빵은 밀가루 40 g과 쌀가루 40 g에 trans 지방 3.75 g을, 콩 빵은 콩가루 30 g과 밀가루 50 g에 trans 지방 3.75 g을 첨가하였고, 밀빵은 밀가루 80 g에 trans 지방 3.75 g을 첨가하여 식빵 형태로 각각 조제하였다. 대상자들은 8시간 공복 후 각각의 빵을 섭취하고 0, 1, 2, 3, 4시간 후 채혈하였고, 이는 혈중 지방산과 trans 지방산의 농도 및 지질 수준 분석에 이용되었다. 포화지방산인 C16:0과 C18:0의 수준은 밀 빵을 섭취한 군에서는 시간의 경과에 따라 유의적인 차이를 보였으나 콩 빵과 쌀 빵을 섭취한 군에서는 섭취 후 유사한 수준이었다. C16:0은 콩 빵과 밀 빵을 섭취한 군에서는 섭취 1시간 후에 peak에도달하였으나 시간이 경과함에 감소하는 경향을 보여 섭취4시간 후 밀 빵 군에서는 변화량은 섭취 전의 수준과 유사하였으나 콩 빵 군에서는 섭취하기 전보다도 낮아지는 것으로 나타났다. C18:0은 섭취 1시간 후 콩 빵과 쌀 빵을 섭취한군이 밀 빵을 섭취한 군에 비해 유의적으로 감소하였으나 콩 빵과 쌀 빵 군 간에 유의적인 차이는 없었다. Trans 지방산인 C18:1t과 18:2t는 세 군 모두에서는 섭취 2시간 후 가장 높은 수준을 보였으며 섭취 4시간 후에는 콩 빵 섭취한 군에서의 C18:1t의 혈중 농도가 가장 낮았다. C18:1c은 섭취 4시간 후 콩 빵 군에서 가장 낮았고 쌀 빵 군에서 가장 높았다. 또한 콩 빵의 섭취는 TG의 증가를 효과적으로 억제하였다. 이상의 결과로 미루어 볼 때 콩 빵의 섭취는 밀 빵을 섭취했을 때보다 혈중 trans 지방산을 비롯한 포화지방산 농도와 TG의 수준을 저하하였으며 이것은 콩에 함유된 식이섬유와 생리활성물질들이 지방산과 지방의 체내 흡수율을 저하시키거나 흡수속도를 느리게 하는 때문으로 사료된다. 따라서 trans 지방산을 비롯한 포화지방산과 TG의 체내 농도를 저하시키기 위해서는 밀 빵보다 콩 빵의 형태로 섭취하는 것이 유익할 것으로 사료된다.

CDMA2000 1X-EVDO망을 이용한 이동형 응급 의료영상 전송시스템의 설계 (The Design of Mobile Medical Image Communication System based on CDMA 1X-EVDO for Emergency Care)

  • 강원석;양건호;장봉문;남궁욱;정해조;유선국;김희종
    • 한국의학물리학회:학술대회논문집
    • /
    • 한국의학물리학회 2004년도 제29회 추계학술대회 발표논문집
    • /
    • pp.53-55
    • /
    • 2004
  • 본 연구에서는 병원에서 멀리 떨어진 교통사고, 낙상에 의한 두개골이나 경추, 척추등의 골절을 동반한 심각한 외상이 있거나 기흉등의 육안으로 진단하기 힘든 응급환자에 있어서는, 구급차를 이용하여 후송중이라 하더라도 방사선검사를 하여 전문의로부터 적절한 진단을 받고 응급조치를 할 필요가 있다. 본 연구의 목적은 응급상황에 사용할 수 있도록 CDMA 1X EVDO 방식의 통신망을 기반으로 하는 이동형 의료영상 전송장치의 프로토타입을 구현하고 성능을 평가하는 것이다. 설계된 시스템은 영상을 전송하기 위한 DICOM 영상전송 클라이언트로 노트북 컴퓨터에 CDMA 1X EVDO 방식을 지원하는 셀룰러폰을 연결하였으며, 병원에는 영상을 받기 위한 DICOM 영상수신 서버를 설치하였다. DR영상을 영상전송 클라이언트의 저장소에 저장한 후, JPEG2000형식으로 압축하여 수신서버로 전송하였다. 모든 영상은 progressive하게 전송되어지고 디스플레이에 표시되었다. 영상의 질을 평가하기 위하여 PSNR을 계산하였으며, 전송품질을 측정하기 위하여 차량의 속도에 따른 CDMA2000 1X-EVDO의 전송률 및 영상의 전송속도를 측정하였다.

  • PDF