• Journal of the Korean Institute of Landscape Architecture
• /
• v.52 no.2
• /
• pp.21-38
• /
• 2024

This study aims to establish an efficient street green area to improve the urban thermal environment and enhance pedestrian thermal comfort. Specifically, This study identified parameters applicable to green space planning and design, analyzed thermal environment mitigation mechanisms for each parameter, and, based on these findings, proposed methods for tree species selection and planting in green space planning and design. To achieve this, 61 papers were selected through a four-stage process from both domestic and foreign sources. The selected papers were analyzed, and the following main results were derived: In open street canyons with high stress levels due to low aspect ratios and high sky view factors(SVF), broadleaf trees with wide crown widths, low trunk heights, high leaf area index(LAI), and high crown heights were found effective in reducing heat, thereby increasing the amount and quality of shade. In contrast, in deep and narrow street canyons with relatively low heat stress due to high aspect ratios and low SVF, broad-leaved trees with narrow crown widths, high trunks, low crown heights, and low LAI were effective in reducing heat by enhancing ventilation. This study can serve as fundamental data for establishing standards for street green spaces to improve the thermal environment of street canyons and enhance thermal comfort of pedestrians. Additionally, it can be valuable when selecting the location and prioritizing street green spaces. Moreover, it is anticipated to be a foundational resource for creating guidelines for green space planning and design in response to climate change.

• Journal of Digital Convergence
• /
• v.21 no.3
• /
• pp.1-14
• /
• 2023

This raises the question of how competitive advantage can be created, prompting firms to enhance their capacity for change. In this context, the role of knowledge creation becomes increasingly vital. This research aims to explore the role of intellectual capital and how to improve knowledge cration ability through absorptive capacity framework. It examines the links among knowledge acquisition, learning of new knowledge, knowledge creation, intellectual capital, and competitive advantage, drawing from both internal and external sources. The study focuses on small and medium-sized supplier firms in Korea, with data collected from 15 industries, totaling 106 responses. The research model employs structural equation modeling (SEM) and utilizes AMOS 22 for analysis. As anticipated, all hypotheses were supported. The study provides robust evidence that absorptive capacity is a pivotal factor in cultivating suppliers' competitive advantage. Furthermore, it posits that intellectual capital should be viewed as a criucial component of suppliers' knowledge stock, significantly enhancing the impact of absorptive capacity on their competitive edge. Future studies should aim to validate the research model in different international settings or across multinational corporations to enhance its generalizabulity.

• Information Systems Review
• /
• v.18 no.3
• /
• pp.1-29
• /
• 2016

The radical changes in the business environment have motivated firms to exert serious efforts in managing sustainable development. This study identified the effects of sustainable development on the perceived performance of firms from the viewpoint of the balanced scorecard. Independent variables include economic efforts (of efficiency and ethic of accounting and fairness), environmental efforts (management and energy control), and social efforts (consumer protection and contribution for local community). The result from the analysis of data collected in this research suggests that sustainable development efforts are the critical sources of the incorporated performance of firms. The consumer protection efforts of the local community determine the competitiveness of a firm in managing social responsibility and creating value and social activities. Efforts to reconsider efficiency determine the competitiveness of a firm, becoming the critical factors that determine sustainable performance. Energy control facilitates value creation for the environment through cooperation and harmonization with nature, resulting in sustainable business performances through the vitalization of practical establishments and operations. Sustainable management needs to meet international standards, cooperation, and harmony. These standards are based on the economic, environmental, and social efforts that enable firms to adopt sustainable management efforts that are suitable for their own systems.

• Information Systems Review
• /
• v.21 no.2
• /
• pp.29-50
• /
• 2019

Social media is divided into Owned Media, operated by companies according to information sources, and Earned Media, which third parties produce contents. Social media research developing the logic that brand-related content in social media increases awareness of potential customers and positively changes brand attitudes, resulting in increased sales and business performance. However, there are limitations in previous researches that can not fully explain the difference of media synergy effect according to the information source of social media. it is very important for the consumer to integrate media management because consumers are more likely to choose appropriate media information for the information needed at each decision making stage. The purpose of this study is to analyze the effect of eWOM of review site and social media (owned media and earned media) on movie sales. To do this, we collected 3,589 review data from films released in 2017. The results of the study showed that eWOM of review site, social media (owned media and earned media) had a positive effect on movie sales. However, it was found that the effect of moderating eWOM of review site was different between the owned media and the earend media.

• Journal of Nutrition and Health
• /
• v.57 no.3
• /
• pp.349-364
• /
• 2024

Purpose: This study used the Analytic Hierarchy Process to evaluate the relative importance of the factors that school nutrition teachers and dietitians consider during menu planning for school foodservices across various educational levels. Methods: An online survey was conducted from December 2023 to January 2024. The hierarchical structure for school foodservice menu management was developed through content analysis, consisting of five high-level categories and 3-4 low-level factors. Questionnaires were distributed to 395 nutrition teachers and dietitians from kindergarten, elementary, middle, and high schools nationwide. One hundred and sixty-six responses were received, resulting in a 42.0% return rate. These responses were analyzed using Microsoft Excel and SPSS Statistics. Results: The most commonly referenced sources for school foodservice menu planning were 'menus obtained from websites' (19.4%). The most significant challenge encountered was 'incorporating students' preferences' (18.6%). In the hierarchy of categories considered for school foodservice menu management, 'employees and facilities' ranked highest (0.2347), followed by 'preference' (0.2312), 'nutrition balance' (0.2027), 'cooking process' (0.1726), and 'food materials' (0.1588). Within each category, the top-ranked factors were 'employees' cooking skills' (0.3759), 'students' preferences' (0.4310), 'dietary reference intakes' (0.4968), 'foodservice hygiene' (0.4374), and 'food costs' (0.4213). The study also compared the relative importance of factors according to the educational levels, and the top-ranked factors were the same across all educational levels. In particular, 'students' preferences', 'dietary reference intake', and 'food costs' aligned with the top three challenges in school foodservice menu planning. Conclusion: Enhancing working conditions for school foodservice employees and developing menu planning methods that accommodate students' preferences are necessary. These findings will provide foundational data for future school foodservice menu management strategies.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.08a
• /
• pp.80-81
• /
• 2012

Recently, one of the critical issues in the etching processes of the nanoscale devices is to achieve ultra-high aspect ratio contact (UHARC) profile without anomalous behaviors such as sidewall bowing, and twisting profile. To achieve this goal, the fluorocarbon plasmas with major advantage of the sidewall passivation have been used commonly with numerous additives to obtain the ideal etch profiles. However, they still suffer from formidable challenges such as tight limits of sidewall bowing and controlling the randomly distorted features in nanoscale etching profile. Furthermore, the absence of the available plasma simulation tools has made it difficult to develop revolutionary technologies to overcome these process limitations, including novel plasma chemistries, and plasma sources. As an effort to address these issues, we performed a fluorocarbon surface kinetic modeling based on the experimental plasma diagnostic data for silicon dioxide etching process under inductively coupled C4F6/Ar/O2 plasmas. For this work, the SiO2 etch rates were investigated with bulk plasma diagnostics tools such as Langmuir probe, cutoff probe and Quadruple Mass Spectrometer (QMS). The surface chemistries of the etched samples were measured by X-ray Photoelectron Spectrometer. To measure plasma parameters, the self-cleaned RF Langmuir probe was used for polymer deposition environment on the probe tip and double-checked by the cutoff probe which was known to be a precise plasma diagnostic tool for the electron density measurement. In addition, neutral and ion fluxes from bulk plasma were monitored with appearance methods using QMS signal. Based on these experimental data, we proposed a phenomenological, and realistic two-layer surface reaction model of SiO2 etch process under the overlying polymer passivation layer, considering material balance of deposition and etching through steady-state fluorocarbon layer. The predicted surface reaction modeling results showed good agreement with the experimental data. With the above studies of plasma surface reaction, we have developed a 3D topography simulator using the multi-layer level set algorithm and new memory saving technique, which is suitable in 3D UHARC etch simulation. Ballistic transports of neutral and ion species inside feature profile was considered by deterministic and Monte Carlo methods, respectively. In case of ultra-high aspect ratio contact hole etching, it is already well-known that the huge computational burden is required for realistic consideration of these ballistic transports. To address this issue, the related computational codes were efficiently parallelized for GPU (Graphic Processing Unit) computing, so that the total computation time could be improved more than few hundred times compared to the serial version. Finally, the 3D topography simulator was integrated with ballistic transport module and etch reaction model. Realistic etch-profile simulations with consideration of the sidewall polymer passivation layer were demonstrated.

• Journal of the Korean Society of Groundwater Environment
• /
• v.4 no.3
• /
• pp.130-143
• /
• 1997

To investigate geochemical characteristics and the sources of the dissolved ion species in the river water in the Han river drainage basin, samples were collected at 60 sites from the Han river drainage basin. The data for. pH, conductivity, TDS (total dissolved solid), temperature, and concentrations of dissloved ions were obtained as follows : (1) The geochemical characteristics of the surface water in the South and North Han river drainage basins are mainly controlled by bed rock geology in the drainage basin and in the main stream of the Han river considerably affected by anthropogenic pollution. The South Han river water samples have high concentrations of $Ca^{2＋}$ (ave. 15.42 ppm), $Mg^{2＋}$ (ave. 2.74 ppm), HC $O_3$$^{[-10]}$ (ave. 51.9 ppm), which evidently indicates that the bed rock geology in a limestone area mainly controls the surface water chemistry. The concentration of S $O_4$$^{2-}$ is remarkably high (SHR10-2 : 129.9 ppm) because of acid mine drainage from the metal and coal mines in the upper reaches of the South Han river. (2) The South Han river and the North Han river join the Han river. in the Yangsuri, Kyounggido and flow through Seoul metropolitan city. The mixing ratio is about 60:40 at the meeting point (sample number HRl0). (3) The result of factor analysis suggests that the pollution factor accounts for about 79% and the bed rock type factor accounts for about 7% of the data variation. This means that the geochemical characteristics of the Han river water mainly controlled by anthropogenic pollution in the South Han river and main stream of the Han river drainage basin. (4) The chemical data for four tributaries such as the Wangsukcheon, the Tancheon, the Zunuangcheon, and the Anyangcheon show that the concentration of pollution elements such as N $O_2$, C $l^{－}$, P $O_4$$^{3-}$, S $O_4$$^{2-}$ and Mn are high due to municipal waste disposal.

• Journal of the Korean Society of Groundwater Environment
• /
• v.6 no.4
• /
• pp.171-179
• /
• 1999

The $CO_2$-rich waters in the Chojeong area are characterized by low pH (5.0~5.8), high $CO_2$pressure (about 1 atm) and high amounts of total dissolved iou (up to 989 mg/L) and chemically belong to Ca-HC $O_3$type. The oxygen. deuterium and tritium isotope data indicate that the mixing process occurred between $CO_2$-rich water and surface water and/or shallow groundwaters and also suggest that the $CO_2$-rich water has been derived from meteoric waters. According to $\delta$$^{13}$ C values (-8.6~-5.3$\textperthousand$). the $CO_2$ in the water is attributed from deep seated $CO_2$gas. The high dissolved carbon (-14.4~-6.8$\textperthousand$. $\delta$$^{13}$ C) in groundwater of the granitic terrain might be affected by $CO_2$-rich water, whereas the dissolved carbon (-17.9~-15.2$\textperthousand$. $\delta$$^{13}$ C) in groundwater of the metamorphic terrain is likely controlled by soil $CO_2$ and from the reaction with calcite in phyllite. Sulfur isotope data (＋3.5~＋11.3$\textperthousand$,$\delta$$^{34}$ $S_{SO4}$) also support the mixing process between $CO_2$-rich water and shallow groundwater. Strontium isotopic ratio ($^{87}$ Sr/$^{86}$ Sr) indicates that the $CO_2$-rich water (0.7138~0.7156) is not related to vein calcite (0.7184) of Buak mine or calcite (0.7281~0.7346) in phyllite. By nitrogen isotope ($\delta$$^{15}$ $N_{NO3}$) the sources of nitrogen (up to 55.0 mg/L, N $O_3$) in the $CO_2$-rich water are identified as fertilizer and animal manure. It also indicates the possibility of denitrification during the circulation of nitrogen in the Chojeong area. The possible evolution model of the $CO_2$-rich water based on the hydrochemical and environmental isotopic data was proposed in this study. The $CO_2$-rich waters from the Chojeong area were primarily derived from the reaction with granite by supply of deep seated $CO_2$. and then the $CO_2$-rich water was mixed and diluted with the local groundwater.ter.

• Journal of Intelligence and Information Systems
• /
• v.18 no.3
• /
• pp.97-117
• /
• 2012

Nowadays, Internet users tend to do a variety of actions at the same time such as web browsing, social networking and multimedia consumption. While watching a video, once a user is interested in any product, the user has to do information searches to get to know more about the product. With a conventional approach, user has to search it separately with search engines like Bing or Google, which might be inconvenient and time-consuming. For this reason, a video annotation platform has been developed in order to provide users more convenient and more interactive ways with video content. In the future of smart TV environment, users can follow annotated information, for example, a link to a vendor to buy the product of interest. It is even better to enable users to search for information by directly discussing with friends. Users can effectively get useful and relevant information about the product from friends who share common interests or might have experienced it before, which is more reliable than the results from search engines. Social networking services provide an appropriate environment for people to share products so that they can show new things to their friends and to share their personal experiences on any specific product. Meanwhile, they can also absorb the most relevant information about the product that they are interested in by either comments or discussion amongst friends. However, within a very huge graph of friends, determining the most appropriate persons to ask for information about a specific product has still a limitation within the existing conventional approach. Once users want to share or discuss a product, they simply share it to all friends as new feeds. This means a newly posted article is blindly spread to all friends without considering their background interests or knowledge. In this way, the number of responses back will be huge. Users cannot easily absorb the relevant and useful responses from friends, since they are from various fields of interest and knowledge. In order to overcome this limitation, we propose a method to filter a user's friends for information search, which leverages semantic video annotation and social networking services. Our method filters and brings out who can give user useful information about a specific product. By examining the existing Facebook information regarding users and their social graph, we construct a user profile of product interest. With user's permission and authentication, user's particular activities are enriched with the domain-specific ontology such as GoodRelations and BestBuy Data sources. Besides, we assume that the object in the video is already annotated using Linked Data. Thus, the detail information of the product that user would like to ask for more information is retrieved via product URI. Our system calculates the similarities among them in order to identify the most suitable friends for seeking information about the mentioned product. The system filters a user's friends according to their score which tells the order of whom can highly likely give the user useful information about a specific product of interest. We have conducted an experiment with a group of respondents in order to verify and evaluate our system. First, the user profile accuracy evaluation is conducted to demonstrate how much our system constructed user profile of product interest represents user's interest correctly. Then, the evaluation on filtering method is made by inspecting the ranked results with human judgment. The results show that our method works effectively and efficiently in filtering. Our system fulfills user needs by supporting user to select appropriate friends for seeking useful information about a specific product that user is curious about. As a result, it helps to influence and convince user in purchase decisions.

• Economic and Environmental Geology
• /
• v.44 no.6
• /
• pp.493-502
• /
• 2011

We study the deep structure of Korean Peninsula by estimating Moho depth and crustal thickness from using land and oceanic topography and free-air gravity anomaly data. Based on Airy-Heiskanen isostatic hypothesis, the correlated components between the terrain gravity effects and free-air gravity anomalies by wavenumber correlation analysis(WCA) are extracted to estimate the gravity effects that will be resulted from isostatic compensation for the area. With the resulting compensated gravity estimates, Moho depth that is a subsurface between the crust and mantle is estimated by the inversion in an iterative method with the constraints of 20 seismic depth estimates by the receiver function analysis, to minimize the uncertainty of non-uniqueness. Consequently, the average of the resulting crustal thickness estimate of Korean Peninsula is 32.15 km and the standard deviation is 3.12 km. Moho depth of South Korea estimated from this study is compared with the ones from the previous studies, showing they are approximately consistent. And the aspects of Moho undulation from the respective study are in common deep along Taebaek Mountains and Sobaek Mountains and low depth in Gyeongsang Basin relatively. Also, it is discussed that the terrain decorrelated free-air gravity anomalies inferring from the intracrustal characteristics of the crust are compared to the heat flow distributions of South Korea. The low-frequency components of terrain decorrelated Free-air gravity anomalies are highly correlated with the heat flow data, especially in the area of Gyeongsang basin where high heat flow causes to decrease the density of the rocks in the lower crust resulting in lowering the Moho depth by compensation. This result confirms that the high heat sources in this area coming from the upper mantle by Kim et al. (2008).