• Journal of the Korea institute for structural maintenance and inspection
• /
• v.3 no.1
• /
• pp.137-146
• /
• 1999

Analysis of R/C columns requires modeling of the plastic hinge region, as well as nonlinear material characteristics. This becomes a challenging task in view of the nonlinearity of both steel and concrete. Furthermore, formation and progression of plasticity in the hinge is a difficult phenomenan to simulate, especially under reversed cyclic loading and decaying strength conditions. This research provide one analytical model employed in column analysis, including the analysis procedure for establishing inelastic force-deformation relationships. The analytical results show good correlation with experimental data. The employed procedure with the adopted analytical models can be used to compute inelastic displacements of concrete columns with welded reinforcement grids. The inelastic deformability beyond the peak was similar to those indicated by columns with conventional ties. The superior performance of columns with welded grids may be attributed to the improved confinement characteristics of grids associated with increased rigidity of welded ties.

• Structural Engineering and Mechanics
• /
• v.29 no.3
• /
• pp.241-258
• /
• 2008

This paper presents a new identification approach to prestress force. Firstly, a bridge deck is modeled as a prestressed Timoshenko beam. The time domain responses of the beam under sinusoidal excitation are studied based on modal superposition. The prestress force is then identified in the time domain by a system identification approach incorporating with the regularization of the solution. The orthogonal polynomial function is used to improve the noise effect and obtain the derivatives of modal responses of the bridge. Good identification results are obtained from only the first few measured modal data under both sinusoidal and impulsive excitations. It is shown that the proposed method is insensitive to the magnitude of force to be identified and can be successfully applied to indirectly identify the prestress force as well as other physical parameters, such as the flexural rigidity and shearing rigidity of a beam even under noisy environment.

• Journal of applied mathematics & informatics
• /
• v.20 no.1_2
• /
• pp.17-34
• /
• 2006

Inverse coefficient identification problems associated with the fourth-order Sturm-Liouville operator in the steady state Euler-Bernoulli beam equation are investigated. Unlike previous studies in which spectral data are used as additional information, in this paper only boundary information is used, hence non-destructive tests can be employed in practical applications.

• Journal of the Korean Chemical Society
• /
• v.9 no.1
• /
• pp.16-22
• /
• 1965

The time-lag-effect of alkali salts on the gelation of sodium alginate-$CaSO_4{\cdot}$1/2 $H_2O$ is compared with Miyake's data, and then the formation rate of the elastics measured by the continuous method (an improved Schwedoff's method) and the change of rigidity with metallic oxides are studied as follows: (1) The gelation processes of sodium alginate and $CaSO_4{\cdot}$1/2 $H_2O$-aqueous sol are studied by measuring, continuously the increases of tensions ofsamples. (2) The time-lag-effect of $Na_3PO_4$ on the formation rate of the elastic gel is larger than that of $Na_2CO_3$, but the difference between the effects of the two alkali salts on the rate is found not so greater than predicted in Miyake's data. (3) Any regularities of the effect on the rate by metallic oxides are not observed. The increasing effects of the rates of $SiO_2$ and MgO are relatively large, and that of ZnO is relatively small. However, $Al_2O_3$, $Sb_2O_3$ and $TiO_2$show some decreasing effects. As a result it is noted that the regularities do not depend on the effect of oxide species and their amounts. (4) It is not found proportionality between the rigidity and the gelation rate. However, the increasing effect of the rigidity with the addition of metallic oxides can be observed. The rigidity increasing rate of MgO is the largest of them.

• Fashion & Textile Research Journal
• /
• v.8 no.3
• /
• pp.357-362
• /
• 2006

This study is to evaluate the objective sensibility of the commercial lining fabrics. Five kinds of the linings were collected by adding taffetas with four kinds of fibers (polyester, nylon, rayon, and acetate) to one polyester stretch fabric. The six basic mechanical and hand properties were studied by using KES-FB system (Kawabata Evaluation System). The result of measuring the mechanical properties shows that polyester has high bending rigidity (B), that polyester-stretch has a high value of linearity of load-extension curve (LT), tensile energy (WT), tensile resilience (RT), and coefficient of friction (MIU) and a low value of bending rigidity(B), shear property, and geometrical roughness (SMD). The nylon has a high value of bending rigidity (B), shear property, and compression resilience (RC). The rayon has a high value of coefficient of friction (MIU) and linearity of compression-thickness curve (LC) and a low value of shear property, and the acetate has a low value of shear property. The result of hand value shows that polyester, nylon, and acetate are a high value of KOSHI (stiffness), NUMERI (smoothness), and FUKURAM (fullness & softness), and they feel stiff and massive, that rayon has a low value of NUMERI and FUKURAMI. The total result of hand value shows that polyester taffeta and polyester stretch fabric are about the same as the best material for the lining of a woman's dress for spring and summer, and the next thing is acetate, but nylon and rayon are somewhat inferior materials. This provides a fundamental data for the comfortable clothing production of a higher value-added product through the study on the mechanical and hand properties of the lining as well as the right side of fabrics.

• The Journal of Asian Finance, Economics and Business
• /
• v.9 no.4
• /
• pp.315-324
• /
• 2022

The goal of this study is to understand better the relationship between hospital bed occupancy rate and cost rigidity as a proxy for the degree of hospital bed congestion, as well as the relationship between the risk of changes in hospital bed occupancy rate and congestion cost, targeting public hospitals. As public hospitals for analysis, we selected hospital projects from the Public Enterprises Survey Reports published by the Department of Public Enterprises, Ministry of Finance, and obtained unbalanced panel data consisting of 1,505 hospitals and 15 years, totaling 12,595 hospitals and years. The analysis revealed that the risk of changes in the bed occupancy rate increases the degree of cost rigidity and leads to a decrease in the variable cost ratio; furthermore, an increase in the bed occupancy rate decreases the degree of cost rigidity and leads to an increase in the variable cost ratio. These findings suggest that although public hospitals are taking managerial actions to avoid congestion costs, congestion costs resulting from higher bed occupancy rates have not been eliminated. The regression analysis results show that even if congestion costs arise as the occupancy rate increases, they are covered by the increase in revenue associated with the increase in the occupancy rate.

• Journal of Advanced Marine Engineering and Technology
• /
• v.16 no.5
• /
• pp.60-66
• /
• 1992

In most cases a structure consists of the assembly of some substructures, we assemble them with various joints, and the structure is fixed to a foundation through mounts. In case of the structure with rigid joints like welding, the Finite Element Mothod could be easily used to analyize the structure's characteristics, but in case of the structure with elastic joints like bolts or rivets, it might be difficult to analyize it by taking account of joint's rigidities, with the conventional method. This paper proposes the method to identify the joint rigidities by the Sensitive Analysis Method and the Optimization Techniques. And the proposed method applied to identify the rigidities of 4 bolts to combine 2 plates(500mm long, 100mm wide, 3.15mm thich). The analized results were well coincident with the experimental results. To confirm the reliability 0 the rigidities identified, another trial was done for the stucture to combine other 2 plates with same joints. The results were good too. This paper is proposin the identifying method of the joint rigidity of a structure, and it could be used for the data base of the joint rigidity and for the guidance to select joint stiffness.

• Journal of Astronomy and Space Sciences
• /
• v.35 no.4
• /
• pp.219-225
• /
• 2018

Cosmic rays are ions that move at relativistic speeds. They generate secondary cosmic rays by successive collisions with atmospheric particles, and then, the secondary particles reach the ground. The secondary particles are mainly neutrons and muons, and the neutrons are observed by the ground neutron monitor. This study compared the diurnal variation in cosmic ray intensity obtained via harmonic analysis and that obtained through the pile-up method, which was examined in a previous study. In addition, we analyzed the maximum phase of the diurnal variation using four neutron monitors with a cutoff rigidity below approximately 6 GV, located at similar longitudes to the Oulu and Rome neutron monitors. Expanding the data of solar cycles 20-24, we examined the time of the maximum cosmic ray intensity, that is, the maximum phase regarding the solar cyclic modulation. During solar cycles 20-24, the maximum phase derived by harmonic analysis showed no significant difference with that derived by the pile-up method. Thus, the pile-up method, a relatively straightforward process to analyze diurnal variation, could replace the complex harmonic analysis. In addition, the maximum phase at six neutron monitors shows the 22-year cyclic variation very clearly. The maximum phase tends to appear earlier and increase the width of the variation in solar cycles as the cutoff rigidity increases.

• The Journal of Industrial Distribution & Business
• /
• v.7 no.3
• /
• pp.27-36
• /
• 2016

Purpose - Considering the importance of housing needs to real estate market, domestic studies on real estate prices from the perspective of demand are basically based on macro-data, but relatively few are associated with micro-data of urban real estate demand. We try to find a reliable relation of elasticity of demand and commercial housing market. Research design, data, and methodology - In this paper, we have derived housing demand theoretic method and have utilized micro-data of residential family housing survey of downtown area in Kunming City in October, 2015 to estimate income elasticity and price elasticity of housing demand respectively and make a comparative analysis. Results - The results indicate that income elasticity and price elasticity of families with owner-occupied housing are both larger than those of families with rental housing. Income elasticity of housing demand of urban residential families in Kunming is far below the foreign average and eastern coastal cities level, however, the corresponding price elasticity is far higher. Conclusions - We suggest that housing affordability of urban families in western China are constrained by the level of economic development, and the current housing price level has exceeded the economic affordability and psychological expectation of ordinary residents. Furthermore, noticing the great rigidity of housing demand, the expansion space of housing market for improvement and for commodity is limited.

• Bulletin of the Society of Naval Architects of Korea
• /
• v.22 no.1
• /
• pp.45-53
• /
• 1985

For the analysis of vertical vibrations of a ship's hull, the Timoshenko beam analogy is accepted up to seven or eight-node modes provided that the system parameters are properly calculated. As to the shear coefficient, it has been a common practice to apply the strain energy method or the projected area method. The theoretical objection to the former is that it ignores lateral contraction due to Poisson's ratio, and the latter is of extreme simplifications. Recently, Cowper's and Stephen's shear coefficient formulas have drawn ship vibration analysts' attentions because these formulas, derivation of which are based on an integrations of the equations of three-dimensional elasticity, take Poisson's ratio into account. Providing computer programs for calculation of the shear coefficient of ship sections modeled as thin-walked multicell sections by each of the forementioned methods, the authors calculated natural vibration characteristics of a bulk carrier and of a container ship by the transfer matrix method using shear coefficients obtained by each of the methods, and discussed the results in comparision. The major conclusions resulted from this investigation are as follows: (1) The shear coefficients taking account of the effects of Poisson's ratio, Cowper's $K_c$ and Stephen's $K_s$, result in higher values of about 10% in maximum as compared with the shear coefficient $K_o$ based on the conventional strain energy methods; (a) $K_c/K_o{\cong}1.05\;and\;K_s/K_o{\cong}1.10$ for ships having single skin side-shell such as a bulk carrier. (b) $K_c/K_o{\cong}1.02\;and\;K_s/K_o{\cong}1.05$ for ships having longitudinally through bulkheads and/or double side-shells in the portion of the cargo hod such as a container carrier. (2) The distributions of the effective shear area along the ship's hull based on each of $K_o,\;K_c\;and\;K_s$ are similar each another except the both end portions. (3) Natural frequencies and mode shapes of the hull based on each of $K_c\;and\;K_s$ are of small differences as compared each other. (4) In cases of using $K_c\;or\;K_s$ in ship vibration analysis, it is also desirable to have the bending rigidity be corrected according to the effective breadth concept. And then, natural frequencies and mode shapes calculated with the bending rigidity corrected in the above and with each of $K_o,\;K_c\;and\;K_s$ result in small differences as compared each another. (5) Referring to those mentioned in the above (3) and (4) and to the full-scale experimental results reported by Asmussen et al.[17], and considering laboursome to prepare the computer input data, the following suggestions can safely be made; (a) Use of $K_o$ in ship vibration analysis is appropriate in practical senses. (b) Use of $K_c$ is appropriate even for detailed vibration analysis of a ship's hull. (6) The effective shear area based on the projected area method is acceptable for the two-node mode.