• Nuclear Engineering and Technology
• /
• 제54권10호
• /
• pp.3587-3594
• /
• 2022

A distributed high-speed data acquisition and monitoring system for the RF negative ion source at Huazhong University of Science and Technology (HUST) is developed, which consists of data acquisition, data forwarding and data processing. Firstly, the data acquisition modules sample physical signals at high speed and upload the sampling data with corresponding absolute-time labels over UDP, which builds the time correlation among different signals. And a special data packet format is proposed for the data upload, which is convenient for packing or parsing a fixed-length packet, especially when the span of the time labels in a packet crosses an absolute second. The data forwarding modules then receive the UDP messages and distribute their data packets to the real-time display module and the data storage modules by PUB/SUB-pattern message queue of ZeroMQ. As for the data storage, a scheme combining the file server and MySQL database is adopted to increase the storage rate and facilitate the data query. The test results show that the loss rate of the data packets is within the range of 0-5% and the storage rate is higher than 20 Mbps, both acceptable for the HUST RF negative ion source.

• 한국인터넷방송통신학회논문지
• /
• 제11권4호
• /
• pp.53-60
• /
• 2011

무선 센서 네트워크에서, IEEE 802.11은 센서노드간에 최대전력을 사용하여 패킷을 전송하기 때문에, 불필요한 에너지 소모가 발생한다. BASIC구조는 RTS-CTS패킷 전송에 최대 전송전력을 사용하며, 에너지 효율을 높이기 위해서 DATA-ACK전송에 최소한으로 필요한 전송전력을 사용한다. 그러나 BASIC구조는 반송파 감지지역의 노드에 의한 ACK패킷의 충돌로 인해 네트워크 수율이 떨어지며, 전력제어를 하지 않는 IEEE 802.11을 사용할 때 보다 더 높은 에너지 소모를 가진다. 기존에 제안된 PCM(Power Control MAC)구조는 ACK패킷의 충돌을 피하기 위해, 반송파 감지지역에서 DATA패킷의 전송을 감지하기 위해 주기적으로 최대 전력레벨로 DATA패킷 전송방법을 이용하였다. 본 논문에서는 기존의 PCM구조의 에너지 효율에 대한 문제점을 제시하고, 보다 높은 에너지 효율을 가진 개선된 PCM구조를 제안하였다.

• 한국정보통신설비학회:학술대회논문집
• /
• 한국정보통신설비학회 2007년도 학술대회
• /
• pp.136-141
• /
• 2007

The frequency accuracy and phase alignment is necessary for ensuring the quality of service (QoS) for applications such as voice, real-time video, wireless hand-off, and data over a converged access medium at the telecom network. As telecom networks evolve from circuit to packet switching, proper synchronization algorithm should be meditated for IP networks to achieve performance quality comparable to that of legacy circuit-switched networks. The Time of Packet (ToP) specified in IEEE 1588 is able to synchronize distributed clocks with an accuracy of less than one microsecond in packet networks. But, The ToP can be affected by impairments of a network such as packet delay variation. This paper proposes the efficient method to minimize the expectable delay variation when ToP synchronizes the distributed clocks. The simulation results are presented to demonstrate the improved performance case when the efficient ToP transmit algorithm is applied.

• Journal of Information Processing Systems
• /
• 제9권3호
• /
• pp.477-488
• /
• 2013

Wireless Sensor Networks (WSNs) are comprised of sensor nodes that forward data in the shape of packets inside a network. Proficient packet forwarding is a prerequisite in sensor networks since many tasks in the network, together with redundancy evaluation and localization, depend upon the methods of packet forwarding. With the motivation to develop a fault tolerant packet forwarding scheme a Self-Localized Packet Forwarding Algorithm (SLPFA) to control redundancy in WSNs is proposed in this paper. The proposed algorithm infuses the aspects of the gossip protocol for forwarding packets and the end to end performance of the proposed algorithm is evaluated for different values of node densities in the same deployment area by means of simulations.

• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2004년도 춘계학술발표대회
• /
• pp.1417-1420
• /
• 2004

The combination of Fast-Handoff and Hierarchical Mobile IPv6 (F-HMIPv6) allows the anticipation of the layer3 handoff such that data traffic can be efficiently redirected to the mobile node's new location before it moves there. However, after moving to the new Access Router (NAR), if the mobile node (MN) sends the Local Binding Update (LBU) to the Mobility Anchor Point (MAP) before receiving all of the buffered packet from the NAR, the MN may receive the general packet from the MAP. That is, the MN may simultaneously receive two types of packet which has different sequence number. These cause the confusion in packet order, and the MN sends the dup ack for the packet retransmission to the CN. It results in the degradation of the TCP performance. Therefore, we propose the scheme for minimizing the out-of-sequence packet in F-HMIPv6.

• 한국정보통신학회논문지
• /
• 제14권5호
• /
• pp.1311-1321
• /
• 2010

주변환경에서 정보를 수집하는 센서네트워크는 다양한 분야에서 사용되고 있다. 정밀한 분석을 위하여 매우 짧은 주기로 정보를 수집할 필요가 있는 어플리케이션에서는 네트워크를 구성하는 노드의 수가 증가하고 정보를 수집하는 주기가 짧아질수록 생성되는 데이터의 양도 증가하기 때문에 노드 간에 지연을 최소화하여 효율성을 높일 필요가 있다. 본 논문에서는 네트워크 구성시 데이터 전송률에 영향을 미치는 전송주기와 센서 노드간의 거리, 전송 패킷의 크기에 대한 실험을 실시하여 실험한 결과를 바탕으로 주기적 전송 기법의 한계와 문제점을 분석하고 패킷 전송 작업이 완료되었음을 알려주는 전송 완료 이벤트를 이용하여 연속적인 패킷 전송시 지연을 줄여주는 SET(SendDone Eventbased Transmission Technique)기법을 제안한다. SET에서는 패킷 전송이 완료된 시점에 즉시 다음 패킷을 전송하기 때문에 패킷을 전송하는데 소요되는 시간에 상관없이 패킷 전송간에 지연이 발생하지 않는다. 따라서 연속적으로 대량의 패킷을 전송할 때 높은 전송율을 제공할 수 있다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1996년도 하계학술대회 논문집 B
• /
• pp.1243-1247
• /
• 1996

In this paper, a small PLC system is designed and developed for the distributed building control and fire control system. It uses 8031, a 8-bit micro controller from Intel Inc. The size of the PLC is $7cm{\times}8cm$ and the PLC can accept 4 sensor inputs and drive 4 relay outputs, which operates at 24V. Multiple access of PLC by one host computer is implemented by assigning a unique 10 to each PLC, which ranges from 0 to 126. The operation starts by sending a command packet from host computer to a PLC and the PLC of the same 10 fetches the command packet by comparing the first byte of the command packet with its own 10. The PLC is programmed to perform a various functions and the function is selected by the content of the command byte, which is the second byte of the command packet. The third byte, which is the last byte, is a checksum byte. The checksum byte is the sum of the first byte and the second byte and is used to detect the communication error. Depending on the content of the command byte, PLC performs the desired function and returns the response packet back to the host computer. The response packet is also a three-byte packet, 10 byte, response byte and checksum byte. For the independent operation of PLC without being controlled by the host computer, variable length RULE data packet is sent to PLC. In case the communication line is broken, the PLC perform the independent operation by referencing the RULE data. The applicable areas are; building automation system, distributed factory automation, measurement of temperature of toxic or dangerous area.

• 전자공학회논문지A
• /
• 제32A권2호
• /
• pp.11-18
• /
• 1995

Error detection in ARQ(Automatic Repeat Request) protocols is very important in wireless data communication systems. The throughput efficiency of ARQ protocols can be improved by dynamically adapting the protocol packet length so that it approaches the optimum value for throuhput efficiency. In this paper, a simple and novel adaptive packet length allocation method is proposed which transmits the packets with variable length by dyanmically estimating the channel codition. The simulation results show that the average of throughput is improved by 315.4% in the stop-and-wait protocol, 41.4% in the go-back-N protocol and 155.9% in the selective repeat protocol respectively. And the throughput performances of adaptive packet length allocation method approximately approach the theoritically optimal throughput performances.

• 경영과학
• /
• 제12권2호
• /
• pp.89-103
• /
• 1995

Traditionally, the scarce and expensive resources in communication networks has been the bandwidth of transmission facilities; accordingly, the techniques used for networking and switching have been chosen so as to optimize the efficient use of that resource. One of them is the packet switching for data communications, which is much different from the circuit switching. It allows multiple users to share the data network facilities and bandwidth, rather than providing specific amounts of dedicated bandwidth to each users. One main challenge therefore has been to design and build cost-effective packet switching networks. In this paper, we develop a mathematical programming medel and heuristic algorithm for designing the packet switching networks with hop-count constraints. To develop an efficient heuristic, we apply the Lagrangian relaxation method. Some valid inequalities, which have been known as the tight constraints, are considered to improve the bound for Lagrangian sub-problem. The computational experiments show that the performance of the proposed heuristic is very satisfactory in both the speed and the quality of design solutions generated.

• ETRI Journal
• /
• 제35권4호
• /
• pp.726-729
• /
• 2013

For secure multimedia communications, existing encryption techniques use an online session key for the key exchange, for which key size is limited to less than 10 digits to accommodate the latency condition caused by user devices only being able to handle low computational loads. This condition results in poor security of recorded encrypted data. In this letter, we propose a packet key scheme that encrypts real-time packets using a different key per packet for multimedia applications. Therefore, a key of a relatively small size can provide after-transmission confidentiality to data of a real-time session.