• Korean Journal of Environmental Agriculture
• /
• v.38 no.1
• /
• pp.34-37
• /
• 2019

BACKGROUND: A region can be divided into agroclimatic zones based on homogeneity in weather variables that have greatest influence on crop growth and yield. The agro-climatic zone has been used to identify yield variability and limiting factors for crop growth. This study was conducted to classify agro-climatic zones in the state of Mato Grosso in Brazil for predicting crop productivity and assessing crop suitability etc. METHODS AND RESULTS: For agro-climatic zonation, monthly mean temperature, precipitation, and solar radiation data from Global Modeling and Assimilation Office (GMAO) of National Aeronautics and Space Administration (NASA, USA) between 1980 and 2010 were collected. Altitude and vegetation fraction of Brazil from Weather Research and Forecasting (WRF) were also used to classify them. The criteria of agro-climatic classification were temperature in the hottest month ($30^{\circ}C$), annual precipitation (600 mm and 1000 mm), and altitude (200 m and 500 m). The state of Mato Gross in Brazil was divided into 9 agro-climatic zones according to these criteria by using matrix classification method. CONCLUSION: The results could be useful as information for estimating agro-meteorological characteristics and predicting crop development and crop yield in the state of Mato Grosso in Brazil.

• Journal of Environmental Science International
• /
• v.28 no.3
• /
• pp.341-356
• /
• 2019

In this study, the impacts of local meteorology caused by tidal changes in the West Sea on ozone distributions in the Seoul Metropolitan Area (SMA) were analyzed using a meteorological model (WRF) and an air quality (CMAQ) model. This study was carried out during the day (1200-1800 LST) between August 3 and 9, 2016. The total area of tidal flats along with the tidal changes was calculated to be approximately $912km^2$, based on data provided by the Environmental Geographic Information Service (EGIS) and the Ministry of Oceans and Fisheries (MOF). Modeling was carried out based on three experiments, and the land cover of the tidal flats for each experiment was designed using the coastal wetlands, water bodies (i.e., high tide), and the barren or sparsely vegetated areas (i.e., low tide). The land cover parameters of the coastal wetlands used in this study were improved in the herbaceous wetland of the WRF using updated albedo, roughness length, and soil heat capacity. The results showed that the land cover variation during high tide caused a decrease in temperature (maximum $4.5^{\circ}C$) and planetary boundary layer (PBL) height (maximum 1200 m), and an increase in humidity (maximum 25%) and wind speed (maximum $1.5ms^{-1}$). These meteorological changes increased the ozone concentration (about 5.0 ppb) in the coastal areas including the tidal flats. The increase in the ozone concentration during high tide may be caused by a weak diffusion to the upper layer due to a decrease in the PBL height. The changes in the meteorological variables and ozone concentration during low tide were lesser than those occurring during high tide. This study suggests that the meteorological variations caused by tidal changes have a meaningful effect on the ozone concentration in the SMA.

• Communications of Mathematical Education
• /
• v.35 no.1
• /
• pp.97-118
• /
• 2021

Since the characteristics of teachers that affect mathematics academic achievement are constantly changing and affecting mathematics achievement, longitudinal studies that can predict and analyze growth are needed. This study used data from middle and high school students from 2013(first year of middle school) to 2017(second year of high school) of the Seoul Education Longitudibal Study(SELS). By classifying the longitudinal changes in mathematics academic achievement into similar subgroups, the direct influence of teachers' characteristics(professionalism, expectations, academic feedback) perceived by students on the longitudinal changes in mathematics academic achievement was examined. As a result of the study, it was found that the characteristics of mathematics teachers(professional performance, expectation, and academic feedback) in group 1(343 students), which included the top 14.5% of students, did not directly affect longitudinal changes in mathematics academic achievement. Students in the middle 2nd group(745, 32.2%) had academic feedback from the mathematics teacher, and the 2nd group(1225 students) in the lower 53%, which included most of the students, showed that the expectations of the mathematics teacher were the longitudinal mathematics achievement. The change has been shown to have a direct effect. This suggests that support for teaching and learning should also reflect this, as the direct influence of teachers' professionalism, expectations, and academic feedback on longitudinal changes in mathematics academic achievement is different according to the characteristics and dispositions of students.

• The Korean Journal of Franchise Management
• /
• v.10 no.2
• /
• pp.33-47
• /
• 2019

Purpose - The purpose of this study is to classify and analyze existing studies from various angles through systematic literature review of how human resources development has been researched in the domestic franchise business. These studies are intended to suggest the direction in which human resource development research should be conducted in the future in the franchise business. Research design, data, and methodology - This study is based on systematic literature review methodology. It has gone through the process of subject language setting, literature search routing, search term selection, literature selection, literature classification and literature analysis. The systematic literature review identified 59 peer-reviewed dissertations and scientific journal publications on the subject of HRD in Korea franchise business. Result - This study analyzed by research methods, research industries, research population and dependent variable using the systematic review process. The literature studied in the 2000s mainly led to research on education and training of franchise employees in beauty franchise business. In the literature studied since 2010, human resources development was mainly studied in the supervisor in the restaurant franchise business, and in the study of competence rather than education and training. According to the research methods, statistical methods were mostly relatively simple, such as t-test or one-way distribution analysis until the 2000s, and after 2010, in-depth and structural studies using multiple return analysis, structural method analysis, path analysis, multi-dimensional scale analysis, AHP, etc were conducted. When classified by study dependant, early research until the 2000s focused on the study of education and training, which is an independent variable, on the satisfaction of education programs, job satisfaction, and immersion. On the other hand, studies conducted since 2010 have produced more complex results using various medium variants, and those related to management performance and relationship performance have been mainly studied, rather than the satisfaction of the education itself. Conclusions - While the domestic franchise business is expanding in terms of quantity, such as the number of franchises and franchises, the development in terms of quality for the joint growth of franchises and franchisees is still lacking. In order for the franchisee to continue to grow with each other, the franchisee must identify and develop their current performance or expected capabilities through capacity modeling at various targets and levels.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.32 no.6
• /
• pp.446-457
• /
• 2020

Crescentic sand bar in the coastal zone of eastern Korea is a common morphological feature and the rhythmic patterns exist constantly except for high wave energy events. However, four consecutive typhoons that directly and indirectly affected the East Sea of Korea from September to October in 2019 impacted the formation of longshore uniform sand bar and overall shoreline retreats (approx. 2 m) although repetitive erosion and accretion patterns exist near the shoreline. Widely used XBeach to predict storm erosions in the beach is utilized to investigate the morphological response to a series of storms and each storm impact (NE-E wave incidence). Several calibration processes for improved XBeach modeling are conducted by recently reported calibration methods and the optimal calibration set obtained is applied to the numerical simulation. Using observed wave, tide, and pre & post-storm bathymetries data with optimal calibration set for XBeach input, XBeach successfully reproduces erosion and accretion patterns near MSL (BSS = 0.77 (Erosion profile), 0.87 (Accretion profile)) and observed the formation of the longshore uniform sandbar. As a result of analysis of simulated total sediment transport vectors and bed level changes at each storm peak Hs, the incident wave direction contributes considerable impact to the behavior of crescentic sandbar. Moreover, not only the wave height but also storm duration affects the magnitude of the sediment transport. However, model results suggest that additional calibration processes are needed to predict the exact crest position of bar and bed level changes across the inner surfzone.

• Smart Media Journal
• /
• v.9 no.4
• /
• pp.152-161
• /
• 2020

In the construction, VR(Virtual Reality) is simply used by users to implement and experience 3D modeling in virtual reality, such as safety, practical education, and promotion. The VR related research includes content development and visualization simulation such as disaster safety evacuation simulation and design education contents. Research on developing suitable VR and presenting directionality is insufficient, which is required in practice. Therefore, in this study, prior to the development of VR suitable for the construction, quantitative evaluation, and analysis based on the judgment of experts are performed. However, the research was conducted on the design stages, which are believed to have high needs and application effects of VR during the lifecycle of construction. There are nine tasks that can be applied to VR in the design stage, and these tasks were evaluated and analyzed using IPA(Importance Performance Analysis) by surveying the level of expectations, importance, and performance. As a result, it was evaluated and analyzed that VR and content development was necessary for the review of member interference and collaboration work for decision making among related stakeholders. The results of this study are expected to be used as basic data for the development of VR to be applied in the design stage to the future.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.2
• /
• pp.593-601
• /
• 2021

The axial fan is an element of a blower used for ventilation in various industrial fields. Many studies on aerodynamic performance have been conducted to assess axial fans using fluid dynamics. The subject was a large axial fan size, 1800 mm in diameter with 100 horsepower. The blower's axial fan consisted of blades, hubs, hub caps, and bosses are important components. The blade design has a great influence on the aerodynamic performance. 3D point data is extracted using an aerodynamic performance prediction program, and a 3D modeling shape is generated. The blades and hubs, which are important components, can be easily modified if processed by cutting owing to the environment in which blades and hubs are manufactured through die casting or gravity casting. In this study, the structural safety of components and the analysis results of weak areas at the rated operating speed of the axial fan were verified using the maximum stress and safety factor. The tip clearance reflected in the design was the rotation of the blade. To check whether there is interference with other components, the displacement result was derived to verify the structural safety of the axial fan.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.6
• /
• pp.583-590
• /
• 2021

This paper is a study on the digitization of an analog 3D pen. The term digital implies features such as homeostasis, transformability, combinability, reproducibility, and convenience of storage. One device that produces a combination of these digital characteristics is a 3D printer, but its industrial use is limited due to low productivity and limitations with materials and physical characteristics. In particular, improvements are required to use 3D printers, such as better user accessibility owing to expertise and skills in modeling software and printers. Complementing this fact is the 3D pen, which is excellent in portability and ease of use, but has a limitation in that it cannot be digitized. Therefore, in order to secure a digitalization capability and ease of use, and to secure the safety of printing materials that pose controversial hazards during the printing process, research problems and alternatives have been derived by combining food, and digitization was demonstrated with a newly developed 3D pen. In order to digitize the 3D pen, a sensor in a structured device detects the motion of an analog 3D pen, and this motion is converted into 3D data (X-Y-Z coordinate values) through a spatial analysis algorithm. To prove this method, the similarity was confirmed by visualization using MeshLab version 1.3.4. It is expected that this food pen can be used in youth education and senior healthcare programs in the future.

• 한국사회정책
• /
• v.20 no.3
• /
• pp.141-170
• /
• 2013

The purpose of this study is to find out the relationship among the degree to provide emotional labor, personal relationship and the intent to stay of female care service workers. Specifically, this study focuses on the mediating effect of the personal relationship (client and agency relation). The path analysis and structural equation modeling analysis were performed on the collected data using SPSS18.0. and AMOS 8.0. And Sobel test conducted for examine the mediating effect. The results are the followings. First, the result of the analysis showed that agency relationship was an indirect factor as the partial mediating effect on relationship between the degree to provide emotional labor and the intent to stay for the care women workers. The result suggests that education utilizing various techniques and strategies to overcome the difficulty accompanied by emotional labor such as communication education and the government try to effort managing and controlling the agency which impact on the labor condition of care workers. Second, the government also tries to provide the trust and collaboration network system which construct a good relationship between the care worker and the agency.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.17 no.2
• /
• pp.125-137
• /
• 2007

This paper proposes a new scheme to provide the location privacy of sources in Wireless Sensor Networks (WSNs). Because the geographical location of a source sensor reveals contextual information on an 'event' in WSN, anonymizing the source location is an important issue. Despite abundant research efforts, however, about data confidentiality and authentication in WSN, privacy issues have not been researched well so far. Moreover, many schemes providing the anonymity of communication parties in Internet and Ad-hoc networks are not appropriate for WSN environments where sensors are very resource limited and messages are forwarded in a hop-by-hop manner through wireless channel. In this paper, we first categorize the type of eavesdroppers for WSN as Global Eavesdropper and Compromising Eavesdropper. Then we propose a novel scheme which provides the anonymity of a source according to the types of eavesdroppers. Furthermore, we analyze the degree of anonymity of WSN using the entropy-based modeling method. As a result, we show that the proposed scheme improves the degree of anonymity compared to a method without any provision of anonymity and also show that the transmission range plays a key role to hide the location of source sensors.