• Journal of Platform Technology
• /
• 제10권4호
• /
• pp.39-46
• /
• 2022

최근 다양한 분야에서 영상과 사운드를 포함한 디지털 콘텐츠가 생성되어 인터넷을 통해 클라우드에 전송된 후 저장되어 활용되고 있다. 디지털 콘텐츠의 활용을 위해서는 해당 데이터 무결성(data integrity) 검증은 필수적이며, 검증 자료의 네트워크 대역폭 효율성 보장이 필요하다. 이 논문에서는 영상데이터의 무결성 검증을 위한 데이터들을 유지 및 관리하며 제공하는 서버의 설계 및 구현에 관하여 기술한다. 서버는 영상데이터를 획득하는 모듈인 Logger로부터 영상데이터를 전달받아 저장하며, 영상데이터의 검증을 수행하는 모듈인 Verifier에 검증에 필요한 데이터를 제공하는 기능을 수행한다. 이후 해시값을 사용하여 경량 머클트리를 구성한다. 경량 머클트리(light-weight Merkle tree)는 두 버젼의 영상프레임 인덱스의 해당 영상프레임 변경사항을 개별 해시값의 비교 없이도 빠르게 무결성 위반을 검출할 수 있다. 이를 위해 네트워크 대역폭 효율성을 갖도록 디지털 콘텐츠의 해시값을 생성하여 경량 머클트리를 구성하고, 이를 무결성 검증의 증명 수행 결과로 제시한다.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2022년도 학술발표회
• /
• pp.334-334
• /
• 2022

Improvement of old-fashioned rain gauge systems for automatic, timely, continuous, and accurate precipitation observation is highly essential for weather/climate prediction and natural hazards early warning, since the occurrence frequency and intensity of heavy and extreme precipitation events (especially floods) are recently getting more increase and severe worldwide due to climate change. Although rain gauge accuracy of 0.1 mm is recommended by the World Meteorological Organization (WMO), the traditional rain gauges in both weighting and tipping bucket types are often unable to meet that demand due to several existing technical limitations together with higher production and maintenance costs. Therefore, we aim to introduce a newly developed and cost-effective hybrid rain gauge system at 0.1 mm accuracy that combines advantages of weighting and tipping bucket types for continuous, automatic, and accurate precipitation observation, where the errors from long-term load cells and external environmental sources (e.g., winds) can be removed via an automatic drainage system and artificial intelligence-based data quality control procedure. Our rain gauge system consists of an instrument unit for measuring precipitation, a communication unit for transmitting and receiving measured precipitation signals, and a database unit for storing, processing, and analyzing precipitation data. This newly developed rain gauge was designed according to the weather instrument criteria, where precipitation amounts filled into the tipping bucket are measured considering the receiver's diameter, the maximum measurement of precipitation, drainage time, and the conductivity marking. Moreover, it is also designed to transmit the measured precipitation data stored in the PCB through RS232, RS485, and TCP/IP, together with connecting to the data logger to enable data collection and analysis based on user needs. Preliminary results from a comparison with an existing 1.0-mm tipping bucket rain gauge indicated that our developed rain gauge has an excellent performance in continuous precipitation observation with higher measurement accuracy, more correct precipitation days observed (120 days), and a lower error of roughly 27 mm occurred during the measurement period.

• 한국강구조학회 논문집
• /
• 제21권4호
• /
• pp.413-420
• /
• 2009

일반적으로 대형 지붕구조나 초대형 보와 같은 대형 구조물을 양중하는 방법은 유압잭이 이용된다. 또한, 양중시 안전을 위하여 CCTV를 이용하여 각 포인트에 설치된 줄자를 모니터링하여 레벨체크를 수행하고, 상대 변위가 기설정된 한계를 벗어나면 유압잭을 정지하고 상대변위를 수동으로 조정한 후에 양중을 수행하였다. 그러나, 이러한 종래의 양중 방법은 CCTV를 육안으로 확인하여 레벨을 체크하기 때문에 정확도가 높지 않았고, 실시간 계측은 현실적으로 불가능하였다. 이러한 문제를 개선하기 위하여 자동추적형 토탈스테이션, 레이저 거리계, 데이터로거, 변형도게이지 등을 이용하여 대형 구조물 양중시 적용할 수 있는 계측-평가 시스템 구축하였다. 시스템을 구현하기 위한 프로그램 작성 후 실험실에서 시연을 통해 계측-평가 데이터의 정확성 및 활용 가능성을 평가하였으며, 안정적인 데이터 취득 및 연산을 통해 적용성이 검증되었다.

• 한국태양에너지학회:학술대회논문집
• /
• 한국태양에너지학회 2011년도 춘계학술발표대회 논문집
• /
• pp.213-216
• /
• 2011

The feasibility study must be conducted for construction of complex for generation of electric power such as items to get permission and grid connection etc. including wind resource to construct a complex for wind power generation. Since wind power can be used by converting only around 20~40% of energy coming in that kinetic energy of wind passes through blades and driving device into electric energy, when constructing a complex, the survey of wind resource takes up the most important part. Data logger used to measure this wind energy are expressed by calculating generally electromotive that is created from a sensor, variable-type, pulse-type signal to be proper for the actual value, and most data loggers have a type without considering geographical features. Besides, in the case of Met mast that is installed to survey the wind resource, since it is installed lower than the hub height of a wind power generator due to permission matters and the economic factors, the height of wind speed by utilizing Deacon equation is compensated to revise this. In this study, a device measuring wind speed was made by using algorithm that is possible to compensate the height of wind speed according to regional features and by applying Deacon equation, and the function of data storage through SD card or RS232 communication was added as well. Besides it's possible to check data more easily with a type of graph by using LCD touch screen for the convenience of users.

• 전기학회논문지
• /
• 제66권2호
• /
• pp.431-438
• /
• 2017

In this paper, the abdomen ECG(AECG) is employed to measure the mother's ECG instead of the conventioanl thoracic ECG measurement. The fetus ECG signal can be extracted from the AECG using an algorithm that utilizes the mobile fetal ECG measurement platform, which is based on the BLE (Bluetooth Low Energy). The algorithm has been implemented by using a replacement processor processed directly from the platform BLE instead of the large statistical data processing required in the ICA(Independent component analysis). The proposed algorithm can be implemented on a mobile BLE wireless ECG system hardware platform to process the maternal ECG. Wireless technology can realize a compact, low-power radio system for short distance communication and the IOT(Intenet of Things) enables the transmission of real-time ECG data. It was also implemented in the form of a compact module in order for mothers to be able to download and store the collected ECG data without having to interrupt or move the logger, and later link the module to a computer for downloading and analyzing the data. A mobile ECG measurement prototype is manufactured and tested to measure the FECG for pregnant women. The experimental results verify a real-time FECG extraction capability for the proposed system. In this paper, we propose an ECG measurement system that shows approximately 91.65% similarity to the MIT database and the conventional algorithm and SNR performance about 10% better.

• Water Engineering Research
• /
• 제3권2호
• /
• pp.93-111
• /
• 2002

In this paper, mixing characteristics and dilution of the merging buoyant discharges from array of multiple jets has been extensively studied in the hydraulic model experiments. New equations for dilution, which include the merging effects correctly, were derived. Experiments were constructed in a 20-m long, 4.9-m wide and 0.6-m deep flume, and the model diffuser was manufactured to indicate the typical characteristics of the existing ocean wastewater outfall in South Korea. Buoyant discharge from the diffuser was reproduced using heated water. Water temperature was measured using CC-Type thermocouple sensors, which were connected to a 40-channel data logger. Experimental results show that merging between ports in a particular riser is dependent upon the discharge densimetric Froude number, whereas merging between two ports which are facing each other at 90$\circ$ at the adjacent risers is dependent upon the discharge densimetric Froude number and distance from the port and port spacing. Centerline dilution increase with distance from the port outlet until two plumes has merged. However, after merging occurs, increase of the centerline dilution almost stops. Further distance from the position where merging occurs, centerline dilution increases again.

• 한국정밀공학회지
• /
• 제16권2호통권95호
• /
• pp.201-210
• /
• 1999

One of the major limitations of productivity and quality in metal cutting is the machining accuracy of machine tools. The machining accuracy is affected by geometric and thermal errors of the machine tools. Therefore, a key requirement for improving te machining accuracy and product quality is to reduce the geometric and thermal errors of machine tools. This study models geometric error for error analysis and develops on-machine measurement system by which the volumetric erors are measured. The geometric error is modeled using form shaping function(FSF) which is defined as the mathematical relationship between form shaping motion of machine tool and machined surface. The constant terms included in the error model are found from the measurement results of on-machine measurement system. The developed on-machine measurement system consists of the spherical ball artifact (SBA), the touch probe unit with a star type stylus, the thermal data logger and the personal computer. Experiments, performed with the developed measurement system, show that the system provides a high measuring accuracy, with repeatability of ${\pm}2{\mu}m$ in X, Y and Z directions.

• 한국HCI학회:학술대회논문집
• /
• 한국HCI학회 2006년도 학술대회 2부
• /
• pp.203-208
• /
• 2006

디자인의 여러 프로세스중 중요 행위는 사용자가 바라는 점을 파악하여, 제안하는 행위 중심으로 이루어진다. 사용자의 니즈를 파악하는데 있어, 사용성 평가를 활용하면, 논리적이고, 구체적인 불편요소를 파악하는데 도움을 받을 수 있다. 또한, 디자인 개선안의 효용성을 파악하는데도 디자이너에게 유용한 디자인 개발 프로세스로 자리 잡았다. 사용성 평가를 통해 사용자의 불편요소를 파악하는 방법으로는 크게 두가지 방법이 있는데, 하나는 데스크 탑 컴퓨터를 활용한 시뮬레이션 기법을 들수 있고 다른 하나는 모바일 폰을 활용하는 모습을 직접 촬영하여, 분석하는 방법을 들 수 있다. 데스크 탑 컴퓨터를 활용한 시뮬레이션 기법은 화면의 해상도와 인터렉션 방법이 상이하고, 직접 촬영 방법의 경우, 피 시험자가 카메라를 의식하거나, 분석상에 연구자의 바이어스가 개입할 여지가 많아 각각의 단점이 있다. 본 연구에서는 디자이너가 해결안을 프로토타이핑 하는 방법으로 모바일 폰의 프로세서를 활용한 로그를 남기는 방법으로 사용성 평가를 진행할 수 있는 도구를 만들고 이를 통한 사용성 평가 기법의 방안을 제안하였다. Mobile phone 의 Software User Interface 의 개선안을 검증할 수 있는 툴로 제작된 Interactive Mobile Phone Logger 라는 프로그램을Visual Basic 과 JAVA를 이용하여 개발하였다. 이를 활용하면, 디자이너의 해결안을 자동으로 JAVA Class 파일의 패키지로 생성해주고, 서버를 이용하여 패키지를 전송, JAVA를 지원하는 모바일 폰이면 어떠한 모델이든 실험에 참가할 수 있도록 제작 되어있다. 또한, 실험의 결과 데이터는 종료시 자동으로 실험자의 서버를 통해 분석될 수있도록 제작되었다.

• KIEAE Journal
• /
• 제7권1호
• /
• pp.23-31
• /
• 2007

This study aims to evaluate the illuminance performance of sloped light guide with automated venetian blind systems. For the purpose, a mock-up model was constructed as a prototype of Korean office building with $12.0m{\times}7.3m{\times}3.7m$ ($w{\times}d{\times}h$) and south facing side-window mounted between the clerestory window($2.0m^2$) and the view window($5.6m^2$). The light guide of 1.28m deepth and $29^{\circ}$ tilted angle, is covered with 0.6mm galvanized steel sheet and 97% reflective film. To protect the room from low solar angle, a blind systems, 0.15m deepth and $30^{\circ}$ automated slat angle was installed. To assess illuminance performance, the totally 37 measuring points for illuminance were monitored. For the detailed analysis, photometric sensors were installed at work-plane (8 points), wall (7 points), ceiling (3points), and exterior horizontal illuminance (1 point) respectively. The performance was measured under clear sky and is monitored by Agilent data logger, photometric sensor Li-cor and the Radiant Imaging ProMetric 1400. Comparisons of light factor and uniformity are discussed.

• 한국도로학회논문집
• /
• 제17권5호
• /
• pp.33-38
• /
• 2015

PURPOSES : The purpose of this paper is to investigate the application of thermoelectric technology to concrete structures for harvesting solar energy that would otherwise be wasted. In various fields of research, thermoelectric technology using a thermoelectric module is being investigated for utilizing solar energy. METHODS: In our experiment, a halogen lamp was used to produce heat energy instead of the solar heat. A data logger was used to record the generated voltage over time from the thermoelectric module mounted on a concrete specimen. In order to increase the efficiency of energy harvesting, various factors such as color, architecture, and the ability to prevent heat absorption by the concrete surface were investigated for the placement of the thermoelectric module. RESULTS : The thermoelectric module produced a voltage using the temperature difference between the lower and upper sides of the module. When the concrete specimen was coated with an aluminum foil, a high electric power was measured. In addition, for the power generated at low temperatures, it was confirmed that the voltage was generated steadily. CONCLUSIONS: Thermoelectric technology for energy harvesting can be applied to concrete structures for generating electric power. The generated electricity can be used to power sensors used in structure monitoring in the future.