• Journal of Positioning, Navigation, and Timing
• /
• v.3 no.3
• /
• pp.99-105
• /
• 2014

A graphic processing unit (GPU) can perform the same calculation on multiple data (SIMD: single instruction multiple data) using hundreds of to thousands of special purpose processors for graphic processing. Thus, high efficiency is expected when GPU is used for the generation and correlation of satellite navigation signals, which perform generation and processing by applying the same calculation procedure to tens of millions of discrete signal samples per second. In this study, the structure of a GPU-based GNSS simulator for the generation and processing of satellite navigation signals was designed, developed, and verified. To verify the developed satellite navigation signal generator, generated signals were applied to the OEM-V3 receiver of Novatel Inc., and the measured values were examined. To verify the satellite navigation signal processor, the performance was examined by collecting and processing actual GNSS intermediate frequency signals. The results of the verification indicated that satellite navigation signals could be generated and processed in real time using two GPUs.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 1993.06a
• /
• pp.1234-1237
• /
• 1993

This paper discusses the hull form generation from fuzzy model constructed with actual ship data using fuzzy concept. SAC, which is the most important factor in the hull form generation, is expressed by a fuzzy model describing the relationships among design parameters, which have a great influence on SAC, through model identification process with the actual ship data and design parameters. Then, we can infer the SAC of an aimed ship through the process of fuzzy inference and decide the offset of a front view by making the fuzzy model between SAC and offset as well. In conclusion, this paper makes a step forward from the geometrical definition, which has been used for hull form generation so far, to direct mathematical formulae about the relationship between design parameters and offset. So, if the design parameters are given, we can generate the hull form taking such properties into account.

• Journal of Industrial Technology
• /
• v.17
• /
• pp.161-168
• /
• 1997

This investigation was carried out to study generation of solid waste and collection system in the College of Engineering and College of Social Science, library, dormitory and student center of Kangwon National University. It is to supply basic data for solid waste management. Each result of investigation considers effect getting generation property, unit waste generation rate and reusing.

• Proceedings of the Korean Institute of Communication Sciences Conference
• /
• 2006.07a
• /
• pp.731-731
• /
• 2006

• IE interfaces
• /
• v.24 no.1
• /
• pp.71-77
• /
• 2011

Design works consist of essential works and subsidiary works. Essential design works means designing creative ideas and productive ideas, while subsidiary design works means helping essential works those are making data tables and specification sheets, checking CAD data's integrity. Subsidiary design works forms the bulk of the whole design process and affects the time limit of delivery. Therefore we propose the automatic data matching system for CAD data's integrity. Proposed system is automatic system supporting subsidiary design works. The data matching system consists of three parts; 1) automatic generation of data tables 2) supporting module for checking CAD data's integrity between Drawings 3) automatic generation of spec. sheets. Developed system was tested in LCD equipment manufacture company and was found to be useful system.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2017.11a
• /
• pp.115-116
• /
• 2017

In this paper, we propose a standardization strategy for next generation electronic navigational chart which can be classified as S-100 Universal Hydrographic Data Model, to accept various requirements arising from various marine information and services as well as support e-navigation service strategies. IMO uses the next generation electronic chart standard, S-100 as Common Maritime Data Structure. It means that a common data model is needed as a key element for realization of e-Navigation and also points out that a new ICT convergence paradigm is needed not only for marine safety but also for maritime information and services. this paper considers he model-based data representation and reference model in order to understand the content and use of the S-100 standard and also considers the interconnectivity and role of the ISO/TC211 standards, which are being used as base standards for profiling to develop S-100 standard. Finally, we look at what standardization items are required for standardization of next generation electronic navigational chart supporting multi-purpose and how they are used mutually.

• Journal of Institute of Control, Robotics and Systems
• /
• v.19 no.10
• /
• pp.928-935
• /
• 2013

In this paper, real-time polygon generation algorithm of 3D point cloud data and texture mapping for tele-operation is proposed. In a tele-operation, it is essential to provide more highly realistic visual information to a tele-operator. By using 3D point cloud data, the tele-operator can observe the working environment from various view point with a reconstructed 3D environment. However, there are huge empty space in 3D point cloud data, since there is no environmental information among the points. This empty space is not suitable for an environmental information. Therefore, real-time polygon generation algorithm of 3D point cloud data and texture mapping is presented to provide more highly realistic visual information to the tele-operator. The 3D environment reconstructed from the 3D point cloud data with texture mapped polygons is the crucial part of the tele-operation.

• Journal of the Korean Society for Precision Engineering
• /
• v.18 no.10
• /
• pp.168-177
• /
• 2001

Reverse engineering has been widely used for the shape reconstruction of an object without CAD data and the measurement of clay or wood models fur the development of new products. To generate a surface from measured points by a laser scanner, typical steps include the scanning of a clay or wood model, the generation of compatible input curves, the generation of a surface and manufacturing data like G code or STL file. A laser scanner has a great potential to get geometrical data of a model for its frost measuring speed and higher precision. The data from a laser scanner are composed of many line stripes of points including small spikes and noise. A new approach using automated surface generating algorithm is introduced to deal with problems during reverse engineering process. And the input data and the generated surface are represented in IGES format, thus can be supplied to other CAD/CAM software without any data manipulation.

• Journal of KIISE:Computing Practices and Letters
• /
• v.8 no.3
• /
• pp.268-276
• /
• 2002

In this paper we suggest a method to produce automatically teat data using UML development diagrams, and analytically describe the application of a tool, Automatic UML-based Test Data Generation (AUTEG) developed using XML technology, to the examples of insurance system. Our AUTEG automatically generates test diagrams that enable to detect errors existing at the interface area between modules composing the whole system, along with test data by applying the existing white-box test technique to the test diagram. Our AUTEG can be applied to the integration test as well as the system test and using the tool, users may make the unit modules of the integration test into several groups.

• KIPS Transactions on Software and Data Engineering
• /
• v.7 no.1
• /
• pp.1-8
• /
• 2018

Software testing is important to determine the reliability of the system, a task that requires a lot of effort and cost. Model-based testing has been proposed as a way to reduce these costs by automating test designs from models that regularly represent system requirements. For each path of model to generate an input value to perform a test, meta-heuristic technique is used to find the test data. In this paper, we propose an automatic test data generation method using a slicing method and a priority policy, and suppress unnecessary computation by excluding variables not related to target path. And then, experimental results show that the proposed method generates test data more effectively than conventional method.