• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2004.04a
• /
• pp.383-388
• /
• 2004

The fusion of a different kind sensor is fusion of the obtained data by the respective independent technology. This is a important technology for the construction of 3D spatial information. particularly, information is variously realized by the fusion of LiDAR and mobile scanning system and digital map, fusion of LiDAR data and high resolution, LiDAR etc. This study is to generate union DEM and digital ortho image by the fusion of LiDAR data and high resolution image and monitor precisely topology, building, trees etc in urban areas using the union DEM and digital ortho image. using only the LiDAR data has some problems because it needs manual linearization and subjective reconstruction.

• Journal of the military operations research society of Korea
• /
• v.34 no.3
• /
• pp.79-92
• /
• 2008

The purpose of this paper is to design an algorithm for data fusion of sensors data in the helicopter ASE system, using Bayesian Network, which was selected among several knowledge base data fusion methods after consideration and applied to this study. The result of the algorithm analysis shows that Bayesian Network is effective method for solving this problem.

• Proceedings of the IEEK Conference
• /
• 2002.06a
• /
• pp.283-286
• /
• 2002

For the satisfying performance of a oil lubricator, design of a oil controller for the system which meets the required specifications and its supporting hardware that keep their functioning is important. Among the hardware of a control system, oil system are most vulnerable to malfunction. Thus it is necessary to keep track of accurate and reliable oil readings for good fusion oil lubricator performance. In case of oil lubricator ,data loss, ssr trigger error faults, they are detected by examining the data system output values and the major values of the system, and then the faults are recognized by the analysis of symptoms of faults. If necessary electronic -sensor values are synthesized according to the types of faults, and then they are used for the controller instead of the raw data. In this paper, a fast-32bit cpu micorprocessor applied to the control of flexible link system with the sensor fault problems in the error module fer exact positioning to show the applicability. It is shown that the fusion oil lubricator can provide a satisfactory loop performance even when the sensor faults occure

• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.668-671
• /
• 2004

This paper proposes a new method of sensor fusion of an ultrasonic sensor and a vision sensor at the sensor level. In general vision system, the vision system finds edges of objects. And in general ultrasonic system, the ultrasonic system finds absolute distance between robot and object. So, the method integrates data of two different types. The system makes perfect output for robot control in the end. But this paper does not propose only integrating a different kind of data but also fusion information which receives from different kind of sensors. This method has advantages which can simply embody algorithm and can control robot on real time.

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.91.4-91
• /
• 2001

In this paper, a development of the sensor fusion algorithm for a visual control of mobile robot is presented. The output data from the visual sensor include a time-lag due to the image processing computation. The sampling rate of the visual sensor is considerably low so that it should be used with other sensors to control fast motion. The main purpose of this paper is to develop a method which constitutes a sensor fusion system to give the optimal state estimates. The proposed sensor fusion system combines the visual sensor and inertial sensor using a modified Kalman filter. A kind of multi-rate Kalman filter which treats the slow sampling rate ...

• Journal of Institute of Control, Robotics and Systems
• /
• v.11 no.4
• /
• pp.304-313
• /
• 2005

The robots that will be needed in the near future are human-friendly robots that are able to coexist with humans and support humans effectively. To realize this, robot need to recognize his position and direction for intelligent performance in an unknown environment. And the mobile robots may navigate by means of a number of monitoring systems such as the sonar-sensing system or the visual-sensing system. Notice that in the conventional fusion schemes, the measurement is dependent on the current data sets only. Therefore, more of sensors are required to measure a certain physical parameter or to improve the accuracy of the measurement. However, in this research, instead of adding more sensors to the system, the temporal sequence of the data sets are stored and utilized for the accurate measurement. As a general approach of sensor fusion, a UT -Based Sensor Fusion(UTSF) scheme using Unscented Transformation(UT) is proposed for either joint or disjoint data structure and applied to the landmark identification for mobile robot navigation. Theoretical basis is illustrated by examples and the effectiveness is proved through the simulations and experiments. The newly proposed, UT-Based UTSF scheme is applied to the navigation of a mobile robot in an unstructured environment as well as structured environment, and its performance is verified by the computer simulation and the experiment.

• Journal of Advanced Navigation Technology
• /
• v.19 no.5
• /
• pp.345-353
• /
• 2015

In this paper, we proposed an information fusion method for enhancement of automatic dependent surveillance - broadcast (ADS-B) system which is one of the next generation navigation system. Although ADS-B provides better performance than traditional radar, ADS-B still has error due to dependence of global navigation satellite system (GNSS) information. In this paper, we improved the ADS-B performance using information fusion of multilateration (MLAT) and wide area multilateration (WAM). Information fusion provides accurate data compared to original data. Mostly, information fusion methods use Kalman filter or IMM(interacting multiple model) filter as a subfilter. However, we used Robust IMM filter as a subfilter to improve the aircraft tracking performance. Also, we use actual ADS-B data not virtual data to increase reliability of our information fusion method.

• Journal of Korea Spatial Information System Society
• /
• v.6 no.1 s.11
• /
• pp.87-100
• /
• 2004

When spatial data which a user requests are stored various data servers in web mapping environment, it is necessary to access one more map servers to gain data and then integrate them. This paper designs and implements a fusion map server for web mapping. The proposed fusion map server has three characteristics. First, it has customizing metadata which reflect various user's requests. Second, it provides fusion services which integrate spatial and non-spatial data. Last, it uses the dynamic liking method to support the fusion services efficiently. We design and implement a publisher client, a map server and a fusion map server for proposed map server.

• Journal of Korea Technology Innovation Society
• /
• v.3 no.2
• /
• pp.78-93
• /
• 2000

Since computerized numerical controller(CNC) emerged as a result of the fusion of the electronics technology and the mechanical technology, there has been continuous evolution of CNC technology in the mechatronics industry. The industry is recently developing a new control system based on the fusion of personal computer(PC) and CNC. Upgraded PC has now integrated into CNC, making various machines possible to exchange data, software and hardware, and to greatly improve man-machine interface. The fusion of PC and CNC can form a new paradigm in technological innovation of not only control system but also whole machinery industry in near the future. Korea lagged behind the developed countries in the development of open control system with the fusion of PC. Turbotek, Hyundai Motor and Daewoo are leading companies, but their commercial possibility seems to be low because domestic market is too small to reap a commercial benefit. Nevertheless, the development of the system is an essential step for Korea to embark on a future technological paradigm of the machinery industry. The government needs to play some role for the development, for instance, government R&D projects, institutional building and training of related technicians.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.14 no.11
• /
• pp.1091-1100
• /
• 2004

This paper presents an approach for the monitoring and detection of faults in induction machine by using data fusion technique and Dempster-Shafer theory Features are extracted from motor stator current and vibration signals. Neural network is trained and Hosted by the selected features of the measured data. The fusion of classification results from vibration and current classifiers increases the diagnostic accuracy. The efficiency of the proposed system is demonstrated by detecting motor electric and mechanical faults originated from the induction motors. The results of the test confirm that the proposed system has potential for real time application.